Modification History
Release 4
Two imported units of competency updated:
- Elective unit HLTAID003 replaces HLTFA311A
- Elective unit HLTAID006 replaces HLTFA412A
Release 2
Two new units added to elective bank:
- FPICOT3263
- FPICOT3264
Imported non-equivalent units updated:
- CPCCCM1015A replaces CPCCCM1005A – Not equivalent
- HLTFA311A replaces HLTFA301C – Not equivalent
- HLTFA412A replaces HLTFA402C – Not equivalent
Release 1.1
Five imported units of competency updated:
- BSBCUS301B replaces BSBCUS301A - Equivalent
- BSBCUS402B replaces BSBCUS402A - Equivalent
- MSS402001A replaces MSACMS200A - Equivalent
- MSS403032A replaces MSACMT432A - Equivalent
- MSS403051A replaces MSACMT451A - Equivalent
Description
Qualification Notes
Specialised Job Roles
RTO please note: Insert specialisation (job role) on certificate only if the industry recommended electives listed below are achieved
Industry strongly recommends the selection of particular electives to meet different job roles
Designer |
Recommended electives for those working in design are: |
|
1 5 2 |
unit from Group A plus units from Group A or B plus units from Group A, B or C or up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course |
|
Production fabricator |
Recommended electives for those working in production are: |
|
6 2 |
units from Group A, B or C plus units from Group A, B or C or up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course |
Pathways Information
This qualification has two employment pathways for typical operational environments of timber truss and frame design. These are:
- Designer (Timber Truss & Frame)
- Production Fabricator (Timber Truss & Frame)
Pathways advice
There is an entry requirement into FPI40411 Certificate IV in Timber Truss and Frame Design. For those seeking a pathway to this qualification, recommended elective units are:
FPICOT3204B |
Prepare and interpret sketches and drawings |
FPICOT3214B |
Take off material quantities |
FPICOT3218B |
Quote and interpret from manufactured timber product plans |
FPICOT3220B |
Quote and interpret from computerised timber manufactured product plans |
FPICOT3239B |
Create drawings using computer aided design systems |
Licensing/Regulatory Information
Native FPI units may be subject to state or territory licensing, legislative, regulatory or certification requirements.
Some imported units in the elective bank may be subject to state or territory codes, regulations, licences and/or permits. These units must be implemented in line with the licensing requirements outlined in the unit’s parent Training Package.
Entry Requirements
There are no entry requirements.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
The following table contains a summary of the employability skills for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that may vary depending on the packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Total number of units = 13
- 5 core units plus
- 8 Elective units, with at least 6 from the list below. Up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course
Elective units must be relevant to work undertaken in the timber truss and frame design sector of the industry
CORE UNITS
Field |
Unit Code |
Unit Title |
Core |
FPICOR2201B |
Work effectively in the forest and forest products industry |
FPICOR2202B |
Communicate and interact effectively in the workplace |
|
FPICOR3201B |
Implement safety, health and environment policies and procedures |
|
FPICOR3202B |
Conduct quality and product care procedures |
|
BSBFLM312C |
Contribute to team effectiveness |
|
GROUP A ELECTIVE UNITS |
||
Field |
Unit Code |
Unit Title |
Specialist Design units. (one unit from this group must be selected to persue a design pathway at Cert IV) |
FPITMM3204A |
Interpret designs to prepare timber roof truss drawings and documents using computers |
FPITMM3205A |
Interpret designs to prepare timber floor system drawings and documents using computers |
|
FPITMM3206A |
Interpret designs to prepare timber wall frame drawings and documents using computers |
|
GROUP B ELECTIVE UNITS |
||
Field |
Unit Code |
Unit Title |
Forest |
FPICOT3204B |
Prepare and interpret sketches and drawings |
FPICOT3214B |
Take off material quantities |
|
FPICOT3218B |
Quote and interpret from manufactured timber product plans |
|
FPICOT3220B |
Quote and interpret from computerised timber manufactured product plans |
|
FPICOT3239B |
Create drawings using computer aided design systems |
|
FPICOT4202B |
Design timber structures |
|
Construction |
CPCCBC4001A |
Apply building codes and standards to the construction process for low rise building projects |
GROUP C ELECTIVE UNITS |
||
Field |
Unit Code |
Unit Title |
Forest |
FPICOR3204B |
Visually assess materials |
FPICOT2235A |
Assess timber for manufacturing potential |
|
FPICOT3234B |
Cut material using CNC sizing machines |
|
FPICOT3235B |
Machine material using CNC machining and processing centres |
|
FPICOT3236B |
Coordinate stock control procedures |
|
FPICOT3241B |
Assemble timber wall frames |
|
FPICOT3242B |
Lay up timber roof trusses |
|
FPICOT3243B |
Operate a truss press |
|
FPICOT3264 |
Build and maintain timber stacks |
|
FPICOT4203B |
Plan and coordinate product assembly |
|
FPICOT4204B |
Schedule and coordinate load shifting |
|
FPITMM2203A |
Read and interpret timber truss, floor and/or frame fabrication plans |
|
FPITMM3207A |
Set up timber floor trusses |
|
Business |
BSBCUS301B |
Deliver and monitor a service to customers |
BSBCUS402B |
Address customer needs |
|
BSBFLM305C |
Support operational plan |
|
BSBINM301A |
Organise workplace information |
|
Construction |
CPCCBC4014A |
Prepare simple building sketches and drawings |
CPCCCM1015A |
Carry out measurements and calculations |
|
Health and Safety |
HLTAID003 |
Provide first aid |
HLTAID006 |
Provide advanced first aid |
|
Manufacturing |
FPICOT3263 |
Maintain and contribute to energy efficiency |
MSS402001A |
Apply competitive systems and practices |
|
MSS403032A |
Analyse manual handling processes |
|
MSS403051A |
Mistake proof an operational process |
|
MSAPMSUP390A |
Use structured problem solving tools |
|
Training |
TAEDEL301A |
Provide work skill instruction |
Transport |
TLIA3018A |
Organise despatch operations |