Modification History
Release |
Comments |
Release 1 |
This version released with FBP Food, Beverage and Pharmaceutical Training Package version 2.0. |
Qualification Description
This qualification describes the skills and knowledge required for operational workers in the sugar milling industry. These workers carry out skilled tasks under broad direction in a range of areas including sugar processing, cane supply and transport, and milling services.
All work must be carried out to comply with workplace procedures, in accordance with state/territory food safety, health and safety and environmental codes, regulations and legislation that apply to the workplace.
No occupational licensing, legislative or certification requirements apply to this qualification at the time of publication.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
- 24 units of competency:
- 3 core units, plus
- 21 elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- at least 9 from the electives listed below, with at least 3 from Group A
- up to 12 from the electives listed below, or from any currently endorsed Training Package or accredited course.
Core Units
BSBWHS201 |
Contribute to health and safety of self and others |
FBPSUG3008 |
Analyse and convey workplace information |
MSMENV272 |
Participate in environmentally sustainable work practices |
Elective Units
An asterisk (*) next to the unit code indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.
Group A
CPCCDO3011A* |
Perform dogging |
CPCCRI3012A* |
Perform basic rigging |
FBPOPR2034 |
Operate an evaporation process |
FBPPPL3004 |
Lead work teams and groups |
FBPSUG2009 |
Operate an extraction station |
FBPSUG2013 |
Operate a pan station |
FBPSUG3002 |
Control cane traffic movements |
FBPSUG3003 |
Adjust cane delivery schedules to meet daily milling requirements |
FBPSUG3004* |
Drive a master-slave locomotive |
FBPSUG3005 |
Operate a sugar system |
FBPSUG3006* |
Monitor a sugar mill powerhouse |
FBPSUG3007 |
Perform factory control tests |
MSMBLIC002 |
Licence to operate an advanced boiler |
TLILIC2016 |
Licence to drive a heavy rigid vehicle |
TLILIC3017 |
Licence to drive a heavy combination vehicle |
Group B
CPCCOHS2001A |
Apply OHS requirements, policies and procedures in the construction industry |
CPCCSC2002A* |
Erect and dismantle basic scaffolding |
FBPOPR2068 |
Operate a process control interface |
FBPSUG2001 |
Lay sleepers for cane rail systems |
FBPSUG2002 |
Lay rails for cane rail systems |
FBPSUG2003 |
Lay skeleton track for cane rail system |
FBPSUG2004 |
Operate tamping equipment |
FBPSUG2005* |
Construct turnouts |
FBPSUG2006 |
Collect and prepare samples |
FBPSUG2007 |
Conduct cane weighbridge operations |
FBPSUG2008 |
Operate a tipping station |
FBPSUG2010 |
Operate a juice clarification process |
FBPSUG2011 |
Operate a mud filtration process |
FBPSUG2012 |
Chemically clean equipment |
FBPSUG2014 |
Operate a low grade fugal station |
FBPSUG2015 |
Operate a high grade fugal station |
FBPSUG2016 |
Operate a crystalliser station process |
FBPSUG2017 |
Undertake simple fabrication |
FBPSUG2018 |
Undertake forming, bending and shaping |
FBPSUG2019 |
Operate a bagasse fuel supply system |
FBPSUG2020 |
Operate a coal fuel supply system |
FBPSUG2021 |
Operate an ash separation system |
FBPSUG2022 |
Operate a waste water treatment system |
FBPSUG2023 |
Operate a cooling water system |
FBPSUG2024 |
Perform standard tests on cane samples |
FBPSUG2025 |
Perform general planing and shaping operations |
FBPSUG2026 |
Perform general drilling operations |
FBPSUG2027 |
Perform general lathe operations |
FBPSUG2028 |
Perform general milling operations |
FBPSUG3001 |
Drive a cane locomotive |
MSMBLIC001 |
Licence to operate a standard boiler |
RIICBM305D |
Install pre-cast concrete bridge decks |
RIIHAN305D |
Operate a gantry or overhead crane |
RIIMPO319E |
Conduct backhoe/loader operations |
TLID3035 |
Operate a boom type elevating work platform |
TLID3036 |
Lift and move load using a mobile crane |
TLILIC0003 |
Licence to operate a forklift truck |
TLILIC0008 |
Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) |
TLILIC2014 |
Licence to drive a light rigid vehicle |
TLILIC2015 |
Licence to drive a medium rigid vehicle |
UEPOPL001 |
Licence to operate a steam turbine |
Prerequisite requirements
Note: Units listed in the Prerequisite requirement column that have their own prerequisite requirements are shown with an asterisk (*)
Unit of competency |
Prerequisite requirement |
CPCCDO3011A Perform dogging |
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry |
CPCCRI3012A Perform basic rigging |
CPCCDO3011A Perform dogging* |
CPCCSC2002A Erect and dismantle basic scaffolding |
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry |
FBPSUG2005 Construct turnouts |
FBPSUG2002 Lay rails for cane rail systems |
FBPSUG3004 Drive a master-slave locomotive |
FBPSUG3001 Drive a cane locomotive |
FBPSUG306 Monitor a sugar mill powerhouse |
UEPOPL001A Licence to operate a steam turbine |
Qualification Mapping Information
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
FBP31018 Certificate III in Sugar Milling Industry Operations |
FDF31012 Certificate III in Sugar Milling Industry Operations |
Updated to meet Standards for Training Packages Packaging rules amended Imported units updated or deleted |
Equivalent qualification |
Links
Companion Volume Implementation Guides are found in VETNet: - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=78b15323-cd38-483e-aad7-1159b570a5c4