Unit of competency
Modification History
|
Release 1 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0 Supersedes and is equivalent to CPCCSH3005 Apply and trim decorative additions to shopfittings and components. |
Application
This unit of competency specifies the skills and knowledge required to apply and trim specifically designed decorative panelling, frames, borders and mirrors to shopfittings and components to ensure a quality finish. It includes offsite work on units being fabricated for installation and on-site installation of units and internal walls.
It applies to shopfitters who also work concurrently with clients and associated contractors to accommodate client requirements where the shop is operational.
Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction.
No licensing, legislative or certification requirements apply to this unit of competency at the time of publication.
Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.
Pre-requisite Unit
Nil.
Unit Sector
Shopfitting
Elements and Performance Criteria
|
Elements describe the essential outcomes. |
Performance criteria describe what needs to be done to demonstrate achievement of the element. |
||
|
1 |
Plan and prepare to apply decorative additions. |
1.1 |
Identify, read and interpret decorative additions from job requirements, plans and specifications. |
|
1.2 |
Determine type of decorative addition to be applied and calculate material quantities using measurements and formulas. |
||
|
1.3 |
Identify worksite hazards and conditions and implement risk control measures following work health and safety and environmental requirements. |
||
|
1.4 |
Determine job priorities and sequence job tasks in consultation with others in the workplace. |
||
|
1.5 |
Obtain materials, check for conformity and safely handle and locate materials ready for use. |
||
|
1.6 |
Establish appropriate method for fixing decorative additions to the substrate. |
||
|
1.7 |
Select, fit and use personal protective equipment (PPE) required for the task. |
||
|
1.8 |
Select tools and equipment for the task, check for serviceability, and rectify and report faults. |
||
|
2 |
Fix and finish decorative additions. |
2.1 |
Set out position of decorative additions in accordance with plan and job description and confirm with client. |
|
2.2 |
Draw a plan to develop a true mitre for a compound angle and a mitre of different material widths and calculate angles by dissection. |
||
|
2.3 |
Set out, mark and cut to length decorative additions. |
||
|
2.4 |
Follow specifications to cut curved decorative additions work. |
||
|
2.5 |
Fit decorative additions and use established method to fix to substrate. |
||
|
2.6 |
Trim and finish decorative additions to meet organisational quality requirements. |
||
|
3 |
Clean up. |
3.1 |
Clean tools and equipment, check for serviceability and report damage or faults. |
|
3.2 |
Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements. |
||
|
3.3 |
Store and secure tools and equipment following workplace procedures. |
||
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Unit Mapping Information
Supersedes and is equivalent to CPCCSH3005 Apply and trim decorative additions to shopfittings and components.
Links
Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad
