Unit of competency
Modification History
Release 1.
This version first released with CPC Construction, Plumbing and Services Training Package Version 2.
Revised unit of competency. Replaces superseded non-equivalent CPCCSI2007A Apply fasteners and fixings.
Application
This unit of competency specifies the outcomes required to erect and install signs to surfaces and structures, safely and according to client requirements.
The unit supports installers of signs working in a range of settings who must ensure appropriate permits are in place prior to erecting a sign, that the surface is suitable for installing the sign, and that appropriate fasteners and fixings have been selected for the task.
Licensing, legislative, regulatory or certification requirements apply to this unit in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
Pre-requisite Unit
Nil
Competency Field
Signs and graphics
Unit Sector
Construction
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
||
1 |
Plan and prepare for installation processes. |
1.1 |
Job requirements are identified from work instructions and confirmed with relevant personnel. |
1.2 |
Characteristics and dimensions of sign are identified and weight of sign is calculated and applied to planning. |
||
1.3 |
Research is undertaken to determine the need for local authority permits to install sign, client is informed, and relevant permissions obtained or sighted before starting work. |
||
1.4 |
Detailed installation drawings are obtained and confirmed. |
||
1.5 |
Tools and equipment are selected to carry out tasks according to job requirements, checked for serviceability, and faults are rectified or reported before starting work. |
||
1.6 |
Health and safety requirements are identified and applied to planning. |
||
1.7 |
Sequence of tasks is determined and confirmed with relevant personnel. |
2 |
Assess installation site. |
2.1 |
Work site is assessed and need for engineering risk assessment is identified with relevant personnel and obtained where appropriate to confirm structural integrity of supporting background before starting work. |
2.2 |
Site plans are sourced and location of assets, services and infrastructure beneath and around installation site are identified. |
||
2.3 |
Condition of surface is assessed and need for remedial work is identified. |
||
2.4 |
Remedial work if required is undertaken or referred to relevant personnel for action according to job requirements. |
3 |
Prepare to secure sign. |
3.1 |
Surface is cleaned and prepared according to planned material application. |
3.2 |
Sign is positioned on site, checked for quality, and identified faults are rectified before installation. |
4 |
Secure sign to surface, as required. |
4.1 |
Location for sign is confirmed against drawings and position is marked out for installation. |
4.2 |
Marked locations are checked to be level and errors in measurements and calculations are rectified before sign is installed. |
||
4.3 |
Sign is positioned and secured with fasteners and fixings according to manufacturer specifications, specified tolerances, job requirements and safety procedures. |
5 |
Secure freestanding sign, as required. |
5.1 |
Location for support materials is marked out on site according to job requirements. |
5.2 |
Footings for sign are created to specified depth according to job requirements and sign characteristics. |
||
5.3 |
Anchor bolts are inserted and holes are filled with concrete and finished to job requirements. |
||
5.4 |
Support poles are inserted, fixed into position, and checked for levelling using levelling tools. |
||
5.5 |
Sign is secured to poles using specified fastenings and fixings, and checked for stability, and faults are rectified or reported to relevant personnel. |
6 |
Finalise work and clean up. |
6.1 |
Installation is checked to ensure it is level, and faults in installation process are identified and rectified or reported to relevant personnel. |
6.2 |
Appropriate colour and type of paint are applied to visible fastenings and fixings to a professional standard and according to job requirements. |
||
6.3 |
Sign and surrounding area are cleaned and waste materials are removed according to statutory and regulatory authority requirements. |
||
6.4 |
Tools and equipment, including personal protective equipment (PPE), are cleaned, maintained and stored according to workplace requirements. |
Foundation Skills
This section describes the language, literacy, numeracy and employment skills essential to performance in this unit but not explicit in the performance criteria. |
|
Skill |
Performance feature |
Learning skills to: |
|
Numeracy skills to: |
|
Reading skills to: |
|
Writing skills to: |
|
Range of Conditions
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below. |
|
Tools and equipment must include: |
|
Health and safety requirements must include: |
|
Fasteners and fixings must include: |
|
Unit Mapping Information
No equivalent unit.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad