Unit of competency
Modification History
Release 3 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 6.4. Correction to Training Package title in the Modification History from CPC Property Services to CPC Construction, Plumbing and Services Training Package Release 1. |
Release 2 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 5.1. Minor edits to formatting. |
Release 1 |
This version first released with CPC Property Services Training Package Release 5.0. Supersedes and is equivalent to CPCCPD3027A Apply wallpaper. Minor title change. Updated to meet the Standards for Training Packages 2012. |
Application
This unit of competency specifies the skills and knowledge required to apply wallpaper to walls of different materials to form a protective and decorative finish.
A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.
Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Pre-requisite Unit
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
Unit Sector
Painting and Decorating
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe what needs to be done to demonstrate achievement of the element. |
||
1 |
Plan and prepare. |
1.1 |
Review work instructions for details of requirements to apply wallpaper. |
1.2 |
Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements. |
||
1.3 |
Prepare plan for hanging wallpaper. |
||
1.4 |
Select and fit personal protective equipment (PPE) as required for each task. |
||
1.5 |
Inspect work site, assess hazards and apply risk controls, including required signage and barricades. |
||
1.6 |
Identify the types and quantities of materials required for the task and safely prepare and position ready for use. |
||
1.7 |
Check wallpaper for conformity to pattern number, batch number and other shading requirements. |
||
1.8 |
Select tools and equipment, check for serviceability and report any faults. |
||
2 |
Remove wallpaper and prepare surface. |
2.1 |
Determine type, condition and nature of existing wallpaper. |
2.2 |
Select surface preparation method in accordance with environmental, finish and substrate requirements. |
||
2.3 |
Remove wallpaper using appropriate tools. |
||
2.4 |
Prepare surfaces by removing loose debris. |
||
2.5 |
Repair surface defects and imperfections, and stop, fill and sand to smooth finish. |
||
2.6 |
Conduct adhesion test and take any required remedial action. |
||
3 |
Prepare to apply wallpaper. |
3.1 |
Seal wall using appropriate material. |
3.2 |
Prepare adhesives in accordance with safe workplace procedures. |
||
3.3 |
Apply size coating to work area and allow to dry. |
||
4 |
Apply wallpaper/lining paper to walls and ceilings. |
4.1 |
Apply wallpaper/ lining paper ensuring an even surface, seams are butted, paper is plumb and pattern matches. |
4.2 |
Trim accurately around fittings. |
||
4.3 |
Remove residue for a clean finish. |
||
5 |
Clean up. |
5.1 |
Clean-up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment. |
5.2 |
Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile. |
||
5.3 |
Check and maintain tools and equipment and clean with appropriate solvents. |
||
5.4 |
Dispose of waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner. |
||
5.5 |
Store tools, equipment and unused materials in accordance with workplace practices. |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Unit Mapping Information
Supersedes and equivalent to CPCCPD3027A Apply wallpaper.
Links
Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad