Unit of competency
Modification History
Release 1 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0. Supersedes and equivalent to CPCCPB3009A Finish plasterboard joints manually. Updated to meet the Standards for Training Packages 2012. |
Application
This unit of competency specifies the skills and knowledge required to manually finish plasterboard joints.
A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.
Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Pre-requisite Unit
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry.
Unit Sector
Plasterboard
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe what needs to be done to demonstrate achievement of the element. |
||
1 |
Plan and prepare. |
1.1 |
Read and interpret work instructions and plan sequence of work. |
1.2 |
Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements. |
||
1.3 |
Select and use personal protective equipment (PPE) for each stage of the task. |
||
1.4 |
Inspect work site, assess hazards and apply risk controls, including required signage and barricades. |
||
1.5 |
Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside. |
||
2 |
Finish joints. |
2.1 |
Select base coat, cement and tape. |
2.2 |
Mix plaster coats to manufacturers’ specifications. |
||
2.3 |
Apply tape to plasterboard joints and smooth the tape, avoiding wrinkles. |
||
2.4 |
Apply plaster base coat over tape, overlapping to specifications, and allow to dry. |
||
2.5 |
Check for plaster build up, and sand to create a smooth finish. |
||
2.6 |
Apply plaster finish, overlapping the joint to specifications. |
||
2.7 |
Sand to specified finish. |
||
2.8 |
Check completed work and rectify any nonconformances to specifications. |
||
3 |
Clean up. |
3.1 |
Clear work area and dispose of, reuse or recycle materials. |
3.2 |
Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications. |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Unit Mapping Information
Supersedes and equivalent to CPCCPB3009A Finish plasterboard joints manually
Links
Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad