^

 
 

Unit of competency details

CPCCPB3003 - Fix battens (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to CPCCPB3003A - Fix battensSupersedes and equivalent to CPCCPB3003A Fix battens 26/Nov/2020

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 27/Nov/2020


Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 040313 Ceiling, Wall And Floor Fixing  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 040313 Ceiling, Wall And Floor Fixing  27/Nov/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Unit of competency

Modification History

Release 1

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0.

Supersedes and equivalent to CPCCPB3003A Fix battens. Updated to meet the Standards for Training Packages 2012.

Application

This unit of competency specifies the skills and knowledge required to fix battens to ceiling joists or roof trusses when preparing to fix ceiling system sheets.

A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.

Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Pre-requisite Unit

CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry.

Unit Sector

Plasterboard

Elements and Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe what needs to be done to demonstrate achievement of the element.

1

Plan and prepare.

1.1

Read and interpret work instructions and plan sequence of work.

1.2

Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

1.3

Select and use personal protective equipment (PPE) for each stage of the task.

1.4

Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

1.5

Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside.

1.6

Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

1.7

Check joists and trusses are suitable for fixing battens and note any requirement to correct unevenness.

1.8

Select fasteners to fix battens.

2

Cut and fix battens.

2.1

Use packing materials to correct uneven joists.

2.2

Measure and cut battens.

2.3

Fix battens using selected fasteners at specified centres following manufacturers’ specifications and allowing for control joints.

2.4

Check completed work for alignment and fixing.

3

Clean up.

3.1

Clear work area and dispose of, reuse or recycle materials.

3.2

Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Unit Mapping Information

Supersedes and equivalent to CPCCPB3003A Fix battens

Links

Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad

 

Assessment requirements

Modification History

Release 1

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0.

Supersedes and equivalent to CPCCPB3003A Fix battens. Updated to meet the Standards for Training Packages 2012.

Performance Evidence

To demonstrate competency, a candidate must satisfy all of the elements, performance criteria and foundation skills of this unit by fixing battens for a 9 square metre ceiling, including at least one control joint.

All work must be performed to the standard required in the workplace and must comply with Commonwealth and state/territory laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

Knowledge Evidence

To be competent in this unit, a candidate must demonstrate knowledge of:

  • compliance requirements of Australian Standards for fixing battens
  • quality policies and standards for fixing battens
  • safety requirements for fixing battens, including personal protective equipment (PPE), job safety analyses, safe work method statements and safety data sheets
  • environmental requirements for fixing battens
  • plans, drawings and specifications for fixing battens
  • batten fixing techniques
  • control joints
  • types of tools and equipment for fixing battens.

Assessment Conditions

Assessors must meet the requirements for assessors contained in the Standards for Registered Training Organisations.

This unit must be assessed:

  • in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques replicate construction workplace conditions, materials, activities, responsibilities and procedures
  • using realistic tasks or simulated tasks, relevant specifications and work instructions, standard work practices, safety requirements and environmental constraints.

Links

Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad