Modification History
Minor editorial and formatting changes
Equivalent to CPCCCM2006A
Unit Descriptor
This unit of competency specifies the outcomes required to carry out levelling in a single plane for the purpose of establishing correct and accurate set-out of building components. It includes the set-up, testing and use of levelling devices, and establishing and transferring heights using a range of levelling equipment.
Application of the Unit
This unit of competency supports achievement of skills to undertake levelling work using a variety of methods and equipment commonly used in the construction industry, which includes working with others and as a member of a team.
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
CPCCOHS2001A |
Apply OHS requirements, policies and procedures in the construction industry |
Employability Skills Information
This unit contains employability skills.
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
1 |
Plan and prepare. |
1.1 |
Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information to prepare for basic levelling activities . |
1.2 |
Safety (OHS) requirements are followed in accordance with safety plans and policies. |
||
1.3 |
Signage and barricade requirements are identified and implemented. |
||
1.4 |
Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement. |
||
1.5 |
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied. |
2 |
Set up and use levelling device. |
2.1 |
Heights or levels to be transferred/established are identified from project plans or instructions for levelling procedures . |
2.2 |
Levelling devices are set up and tested in accordance with manufacturer instructions, including levelling device tolerance checks . |
||
2.3 |
Levelling staffs are accurately applied. |
||
2.4 |
Levels are shot and heights transferred to required location and marked and/or recorded to job requirements. |
||
2.5 |
Results of levelling procedure are documented to organisational requirements. |
3 |
Clean up. |
3.1 |
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. |
3.2 |
Tools and equipment are cleaned, checked, maintained, including levelling device operator maintenance , and stored in accordance with manufacturer recommendations and standard work practices. |
Required Skills and Knowledge
This section describes the skills and knowledge required for this unit. |
Required skills |
Required skills for this unit are:
|
Required knowledge |
Required knowledge for this unit is:
|
Evidence Guide
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
A person who demonstrates competency in this unit must be able to provide evidence of the ability to:
|
Context of and specific resources for assessment |
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include:
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment |
Assessment methods must:
Validity and sufficiency of evidence requires that:
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Information includes: |
|
Basic levelling activities may include: |
|
Safety (OHS) is to be in accordance with legislation, regulations, codes of practice, organisational safety policies and procedures, and project safety plan and may include: |
|
Tools and equipment may include: |
|
Environmental requirements include: |
|
Statutory and regulatory authorities include: |
|
Heights or levels may be indicated by: |
|
Levelling procedures : |
|
Levelling devices may include: |
|
Levelling device tolerance checks may include: |
|
Levelling device operator maintenance : |
|
Unit Sector(s)
Functional area |
|
Unit sector |
Construction |
Custom Content Section
Not applicable.