Unit of competency details

Unit descriptor 

This unit of competency specifies the outcomes required to install flashings and damp proofing products to different types and styles of buildings. It includes planning, preparation, set out, installation and application requirements of the work.

Application of the unit 

This unit of competency supports achievement of skills for laying damp proof course (DPC) and flashings to moisture proof buildings and structures, which includes working with others and as a member of a team.

Prerequisite units 

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

Employability skills 

This unit contains employability skills.

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare for work.

1.1. Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information  to determine damp proofing applications .

1.2. Safety  (OHS ) requirements are followed in accordance with safety plans and policies.

1.3. Signage and barricade requirements are identified and implemented.

1.4. Plant, tools and equipment  selected to carry out tasks are consistent with job requirements and type of construction , are checked for serviceability, and any faults are rectified or reported prior to commencement.

1.5. Material quantity requirements are calculated in accordance with plans, specifications and quality requirements .

1.6. Materials  appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.

1.7. Environmental requirements  are identified for the project in accordance with environmental plans and statutory and regulatory authority  obligations, and are applied.

2. Identify damp proofing requirement.

2.1. Type of flashing and damp proofing material are identified in accordance with job specifications, state of structure and job safety (OHS) requirements.

2.2. Area of structure requiring damp proofing is identified from job drawings and specifications or site inspection.

2.3. Area of structure requiring damp proofing is inspected for defects and soundness, in accordance with job and manufacturer specifications.

3. Prepare surface.

3.1. Defects are identified, corrected and made good to requirements of manufacturer specifications.

3.2. Surface preparation  of structure requiring damp proofing is carried out to manufacturer specifications.

4. Install DPC.

4.1. Damp proof is installed in accordance with work drawings and manufacturer specification.

4.2. Flashing or damp proof course  is laid and lapped in accordance with manufacturer specifications.

4.3. Damp proof material is applied with a consistent mortar bed on top and bottom.

4.4. DPC is folded to follow shape of surrounding structures.

5. Install moisture proof barrier or flashings.

5.1. Flashing materials are prepared for application  to surrounding structures in accordance with design drawings and manufacturer recommendations.

5.2. Flashing material is laid, lapped and joined to follow shape of surrounding structure.

5.3. Flashings or moisture barrier material is formed and sealed around openings.

5.4. Flashing and DPC are installed to project outside of mortar joint on external surface, and outside of brickwork in accordance with manufacturer specifications.

6. Clean up.

6.1. Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

6.2. Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Required skills for this unit are:

• communication skills to:

• determine requirements
• enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand
• follow instructions
• read and interpret:

• documentation from a variety of sources
• plans, specifications and drawings

• report faults
• use language and concepts appropriate to cultural differences
• use and interpret non-verbal communication, such as hand signals

• numeracy skills to apply measurements and make calculations
• organisational skills, including the ability to plan and set out work
• teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities
• technological skills to:

• use a range of mobile technology, such as two-way radio and mobile phones
• voice and hand signals to access and understand site-specific instructions.

Required knowledge 

Required knowledge for this unit is:

• characteristics and applications of materials for the installation of flashings and DPC
• construction terminology
• job safety analysis (JSA) and safe work method statements
• material safety data sheets (MSDS)
• materials storage and environmentally friendly waste management
• plans, specifications and drawings
• processes for the calculation of material requirements
• quality requirements
• techniques for installing flashings and DPC
• waterproofing methods
• types, characteristics, uses and limitations of plant, tools and equipment
• workplace and equipment safety requirements.

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

• locate, interpret and apply relevant information, standards and specifications
• comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations
• comply with organisational policies and procedures, including quality requirements
• safely and effectively use tools, plant and equipment
• communicate and work effectively and safely with others
• as a minimum, install flashings of suitable materials for the following construction situations: step flashings and/or DPC to cavity brickwork including internal and external corners, window and door heads and vertical flashings; and stepped and tray flashings to gables and/or parapets, ensuring:

• correct identification of requirement and finishing of the tasks
• correct selection and use of appropriate processes, tools and equipment
• completing all work to specification.

Context of and specific resources for assessment 

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

• an induction procedure and requirement
• realistic tasks or simulated tasks covering the mandatory task requirements
• relevant specifications and work instructions
• tools and equipment appropriate to applying safe work practices
• support materials appropriate to activity
• workplace instructions relating to safe work practices and addressing hazards and emergencies
• material safety data sheets
• research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment 

Assessment methods must:

• satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
• include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
• reinforce the integration of employability skills with workplace tasks and job roles
• confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

• competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
• where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
• all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information  includes:

• diagrams or sketches
• instructions issued by authorised organisational or external personnel
• manufacturer specifications and instructions where specified
• memos
• MSDS
• organisation work specifications and requirements
• plans and specifications
• regulatory and legislative requirements pertaining to installing flashings and DPC
• relevant Australian standards
• safe work procedures related to installing flashings and DPC
• signage
• verbal or written and graphical instructions
• work bulletins
• work schedules.

Damp proofing applications  include:

• basements
• damp proof through walls
• floors
• wall surfaces.

Safety  (OHS ) is to be in accordance with legislation, regulations, codes of practice, organisational safety policies and procedures, and project safety plan and may include:

• emergency procedures, including emergency shutdown and stopping, extinguishing fires, organisational first aid requirements and evacuation
• handling of materials
• hazard control
• hazardous materials and substances
• safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

• earth leakage boxes
• lighting
• power cables, including overhead service trays, cables and conduits
• restricted access barriers
• surrounding structures
• traffic control
• trip hazards
• underground services, including water, gas, electricity and communications
• work site visitors and the public
• working at heights
• working in confined spaces
• working in proximity to others
• working with dangerous materials

• organisational first aid
• personal protective clothing and equipment prescribed under legislation, regulations and workplace policies and practices
• use of firefighting equipment
• use of tools and equipment
• workplace environment and safety.

Tools and equipment  include:

• brooms
• brushes
• buckets
• concrete mixers
• electric drills
• hammers (brickies, club and scutch)
• hoses
• knives or cutting blades
• measuring tapes and rules
• margin or raking tools
• rollers
• scaffolds
• shovels
• spirit levels
• trowels
• vacuum cleaner
• wheelbarrows.

Type of construction  include:

• blockwork
• brickwork
• reinforced in situ concrete and pre-cast concrete
• stonework.

Quality requirements  include relevant regulations, including:

• Australian standards
• internal company quality policy and standards
• manufacturer specifications, where specified
• workplace operations and procedures.

Damp proofing materials  include:

• aluminium sheeting
• bituminous sheeting
• emulsions
• lead and polyurethane sheeting
• polyethylene sheeting.

Environmental requirements  include:

• clean-up protection
• noise and dust
• vibration
• waste management.

Statutory and regulatory authorities  include:

• federal, state and local authorities administering applicable Acts, regulations and codes of practice.

Surface preparation  includes:

• chipping or scraping of protrusions
• cleaning free of dust.

Flashing or damp proof course  includes:

• cavities
• cavity gutters
• lintels
• roofs
• windows.

Prepared for application  includes:

• checking quality and blends of sand used in mortar materials
• mixing
• stirring
• batching and mixing
• cutting sheet material to length
• folding materials to shape.

Unit sector 

Construction

Co-requisite units 

Nil

Functional area