Modification History
Not Applicable
Unit Descriptor
Unit descriptor |
This unit of competency specifies the outcomes required to access, interpret and apply relevant building codes and standards applicable to the construction processes of swimming pools and spas. To successfully plan and build indoor or outdoor permanent swimming pools and spas it is essential to understand the purpose and content of the Building Code of Australia (BCA) and be able to interpret other relevant standards and codes related to the building process. |
Application of the Unit
Application of the unit |
This unit of competency supports swimming pool and spa builders, site managers and related construction industry professionals responsible for ensuring compliance with building codes and standards in the construction industry. |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
Prerequisite units |
Nil |
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Access and interpret relevant code and standard requirements. |
1.1. Relevant performance requirements from the BCA that apply to individual swimming pool and spa installations are identified. 1.2. Requirements of relevant BCA deemed-to-satisfy (DTS) provisions are determined. 1.3. Requirements of relevant Australian standards referenced in the BCA are accessed and interpreted accordingly. |
2. Classify the swimming pool and spa to be built. |
2.1. Intended use and site arrangement of swimming pool and spa are determined. 2.2. BCA criteria to determine the defined classification are applied. |
3. Analyse and apply a range of solutions to a construction problem for compliance with the BCA. |
3.1. Range of criteria that will ensure swimming pool and/or spa construction methods comply with the performance requirements of the BCA is determined. 3.2. Alternative solutions to a design or construction problem that will comply with BCA requirements are discussed with the clients and proposed in accordance with company policies and procedures. 3.3. Performance-based solutions are identified and documented in accordance with BCA requirements. 3.4. Assessment methods referenced in the BCA to determine whether a building solution complies with performance requirements or DTS provision of the BCA are analysed and applied. 3.5. Relevant documentation is identified and completed in accordance with BCA requirements. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
Required skills for this unit are:
|
Required knowledge |
Required knowledge for this unit is:
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
This unit of competency could be assessed by planning a swimming and spa that meets applicable building codes and standards. This unit of competency can be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
A person who demonstrates competency in this unit must be able to provide evidence of the ability to:
|
Context of and specific resources for assessment |
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include:
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment |
Assessment methods must:
Validity and sufficiency of evidence requires that:
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Assessment methods include: |
|
Performance requirements include: |
|
Unit Sector(s)
Unit sector |
Construction |
Co-requisite units
Co-requisite units |
Nil |
Functional area
Functional area |