^

 
 

Qualification details

CPC33020 - Certificate III in Bricklaying and Blocklaying (Release 3)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to CPC30111 - Certificate III in Bricklaying/BlocklayingSupersedes and is equivalent to CPC30111 Certificate III in Bricklaying/Blocklaying. 26/Nov/2020

Release Status:
Current
Releases:
ReleaseRelease date
3 (this release) 06/May/2021
(View details for release 2) 23/Dec/2020
(View details for release 1) 27/Nov/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
AHCLSC307 - Implement a retaining wall projectImplement a retaining wall projectElective
CPCCCM2012 - Work safely at heightsWork safely at heightsCore
CPCCPA3001 - Prepare subgrade, base and bedding course for segmental pavingPrepare subgrade, base and bedding course for segmental pavingElective
CPCCPA3003 - Cut segmental pavingCut segmental pavingElective
CPCCST4007 - Construct a fire brick wall and arch using refractory materialsConstruct a fire brick wall and arch using refractory materialsElective
CPCCBL3006 - Lay multi-thickness walls and piersLay multi-thickness walls and piersCore
CPCCPA3004 - Finish segmental pavingFinish segmental pavingElective
CPCCBL3005 - Lay masonry walls and cornersLay masonry walls and cornersCore
CPCCBC4003 - Select, prepare and administer a construction contractSelect, prepare and administer a construction contractElective
CPCCOM1015 - Carry out measurements and calculationsCarry out measurements and calculationsCore
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 43

Classifications

SchemeCodeClassification value
ANZSCO Identifier 331111 Bricklayer 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Landscaping,Building Trades 
Taxonomy - Occupation N/A Heritage Bricklayer,Paver,Bricklayer 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 331111 Bricklayer 27/Nov/2020 
ASCED Qualification/Course Field of Education Identifier 0403 Building 27/Nov/2020 
Qualification/Course Level of Education Identifier 514 Certificate III 27/Nov/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 3

This version first released with CPC Construction, Plumbing and Services Training Package Release 6.3.

Removal of prerequisite asterisks from units:

  • CPCCOM1012 Work effectively and sustainably in the construction industry
  • CPCCOM1013 Plan and organise work
  • CPCCOM1014 Conduct workplace communication.

Unit CPCCOM2001 Read and interpret plans and specifications marked with an asterisk as a prerequisite requirement must be met.

Release 2

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.1.

Title change in unit list for CPCCBL3017 Carry out tuck pointing brickwork.

Release 1

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0.

Supersedes and is equivalent to CPC30111 Certificate III in Bricklaying/Blocklaying.

Qualification Description

This qualification reflects the trade qualified role of a bricklayer, blocklayer or paver who may have responsibility for undertaking heritage bricklaying, refractory bricklaying, bricklaying, blocklaying and paving work in residential, industrial and commercial contexts, in both existing and new constructions.

Occupational titles could include:

  • Bricklayer
  • Blocklayer
  • Paver.

The bricklaying, blocklaying and paving industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or closely simulated workplace environment and this qualification requires all units of competency to be delivered and assessed in this context.

Licensing, legislative, regulatory and certification requirements vary between states. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

This qualification has core units and elective units of competency that cover the skills and knowledge of three specialist groups, and general electives:

  • Group A - Traditional and heritage bricklaying
  • Group B - Refractory Bricklaying
  • Group C - Paving

To achieve this qualification, competency must be demonstrated in:

  • 28 units of competency:
  • 20 core units
  • 8 elective units.
  • the elective units can be selected, once only, from any of the groups listed below.
  • up to two elective units can be selected from any Training Package and or accredited course, as long as they contribute to a valid, industry-supported vocational outcome and support the AQF level of this qualification.

Prerequisite units 

An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.

Core units 

CPCCBL2001*

Handle and prepare bricklaying and blocklaying materials

CPCCBL2002*

Use bricklaying and blocklaying tools and equipment

CPCCBL3002*

Carry out masonry veneer construction

CPCCBL3003*

Carry out cavity brick construction

CPCCBL3005*

Lay masonry walls and corners

CPCCBL3006*

Lay multi-thickness walls and piers

CPCCBL3009*

Install flashings and damp proof course

CPCCBL3010*

Construct masonry arches

CPCCBL3011*

Construct curved walls

CPCCBL3013*

Construct masonry structural systems

CPCCCA3002*

Carry out setting out

CPCCCM2006

Apply basic levelling procedures

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCCM2012*

Work safely at heights

CPCCOM1012

Work effectively and sustainably in the construction industry

CPCCOM1013

Plan and organise work

CPCCOM1014

Conduct workplace communication

CPCCOM1015

Carry out measurements and calculations

CPCCOM2001*

Read and interpret plans and specifications

CPCCWHS2001

Apply WHS requirements, policies, and procedures in the construction industry

Elective units 

Group A - Traditional and heritage bricklaying 

CPCCST4001

Prepare to undertake the heritage restoration process

CPCCST4002

Undertake the heritage restoration process

CPCCBL3004*

Construct masonry steps and stairs

CPCCBL3012*

Construct fireplaces and chimneys

CPCCBL3015*

Construct decorative brickwork

CPCCBL3016*

Construct battered masonry walls and piers

CPCCBL3017*

Carry out tuck pointing and repointing to masonry

CPCCCO2013*

Carry out concreting to simple forms

CPCCSF2004*

Place and fix reinforcement materials

Group B – Refractory Bricklaying 

CPCCST4003

Undertake preparations for refractory work

CPCCST4007

Construct a fire brick wall and arch using refractory materials

CPCCBL3004*

Construct masonry steps and stairs

CPCCBL3012*

Construct fireplaces and chimneys

CPCCBL3016*

Construct battered masonry walls and piers

CPCCCM2009*

Carry out basic demolition

CPCCCO2013*

Carry out concreting to simple forms

CPCCSF2004*

Place and fix reinforcement materials

Group C - Paving 

CPCCCO2013*

Carry out concreting to simple forms

CPCCPA3001*

Prepare subgrade, base and bedding course for segmental paving

CPCCPA3002*

Lay segmental paving

CPCCPA3003*

Cut segmental paving

CPCCPA3004*

Finish segmental paving

CPCCPA3005*

Maintain and repair segmental paving

CPCCSF2004*

Place and fix reinforcement materials

General Electives 

AHCLSC307

Implement a retaining wall project

CPCCBC4003

Select, prepare and administer a construction contract

CPCCST4003

Undertake preparations for refractory work

CPCCBL3001*

Lay paving

CPCCBL3004*

Construct masonry steps and stairs

CPCCBL3007*

Install glass blockwork

CPCCBL3012*

Construct fireplaces and chimneys

CPCCBL3014*

Install fire-rated masonry construction

CPCCBL3015*

Construct decorative brickwork

CPCCBL3016*

Construct battered masonry walls and piers

CPCCBL3017*

Carry out tuck pointing and repointing to masonry

CPCCBL3018*

Install aerated autoclaved concrete products

CPCCCM2009*

Carry out basic demolition

CPCCCO2013*

Carry out concreting to simple forms

CPCCPA3001*

Prepare subgrade, base and bedding course for segmental paving

CPCCPA3002*

Lay segmental paving

CPCCPA3003*

Cut segmental paving

CPCCPA3004*

Finish segmental paving

CPCCPA3005*

Maintain and repair segmental paving

CPCCSF2004*

Place and fix reinforcement materials 

Qualification Mapping Information

CPC Construction, Plumbing and Services Training Package Release 5.0 

CPC08 Construction, Plumbing and Services Training Package 

Comments 

E/NE 

CPC33020 Certificate III in Bricklaying and Blocklaying

CPC30111 Certificate III in Bricklaying/Blocklaying

Supersedes and is equivalent to CPC30111 Certificate III in Bricklaying/Blocklaying.

E

Links

Companion volumes to this training package are available at the VETNet website - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad