^

 
 

Qualification details

CPC32320 - Certificate III in Stonemasonry (Release 3)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to CPC32313 - Certificate III in Stonemasonry (Monumental/Installation)Supersedes and is equivalent to CPC32313 Certificate III in Stonemasonry (Monumental/Installation). 26/Nov/2020

Release Status:
Current
Releases:
ReleaseRelease date
3 (this release) 06/May/2021
(View details for release 2) 23/Dec/2020
(View details for release 1) 27/Nov/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
CPCCST3009 - Use computer-controlled static machinery to produce stone componentsUse computer-controlled static machinery to produce stone componentsElective
CPCCST3010 - Set out and cut letters in stoneSet out and cut letters in stoneCore
CPCCST3013 - Carry out cemetery monument fixingCarry out cemetery monument fixingElective
CPCCCM2012 - Work safely at heightsWork safely at heightsCore
CPCCST2001 - Prepare for stonemasonry construction processPrepare for stonemasonry construction processElective
CPCCST3023 - Apply drawing principles to stonemasonryApply drawing principles to stonemasonryElective
CPCCST4005 - Prepare drawings for heritage worksPrepare drawings for heritage worksElective
CPCCPA3001 - Prepare subgrade, base and bedding course for segmental pavingPrepare subgrade, base and bedding course for segmental pavingElective
CPCCST3017 - Construct stone archesConstruct stone archesElective
CPCCST2007 - Use stonemasonry tools, plant and equipmentUse stonemasonry tools, plant and equipmentCore
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 59

Classifications

SchemeCodeClassification value
ANZSCO Identifier 331112 Stonemason 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Building Trades 
Taxonomy - Occupation N/A Monumental Stonemason,Stonemason 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 331112 Stonemason 27/Nov/2020 
ASCED Qualification/Course Field of Education Identifier 0403 Building 27/Nov/2020 
Qualification/Course Level of Education Identifier 514 Certificate III 27/Nov/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 3

This version first released with CPC Construction, Plumbing and Services Training Package Release 6.3.

Removal of prerequisite asterisks from units:

  • CPCCOM1012 Work effectively and sustainably in the construction industry
  • CPCCOM1013 Plan and organise work
  • CPCCOM1014 Conduct workplace communication.

Unit CPCCOM2001 Read and interpret plans and specifications marked with an asterisk as a prerequisite requirement must be met.

Release 2

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.1.

Minor changes to Core unit list for clarity. Correction to Release 1 version history.

Release 1

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0.

Supersedes and is equivalent to CPC32313 Certificate III in Stonemasonry (Monumental/Installation). Updated qualification to meet Standards for Training Packages.

Qualification Description

This qualification is designed to meet the needs of stonemasons working with sandstone, limestone, marble and other types of stone and stone products to produce stone monuments, buildings (heritage and new) and building components, such as walls, floors, arches, chimneys, stairs, windows, decorative mouldings, fireplaces and benchtops.

Occupational titles may include:

  • Architectural stonemason
  • Monumental stonemason
  • Heritage stonemason
  • Finisher
  • Bench-top mason
  • Stonemason.

This qualification is suitable for an Australian Apprenticeship pathway.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

This qualification has core and elective units of competency that cover the skills and knowledge of four specialist groups and general electives:

  • Group A - Architectural heritage, conservation and restoration stonemasonry
  • Group B - New and contemporary works (building stonemasonry)
  • Group C - Monumental stonemasonry
  • Group D - Bench-tops

To achieve this qualification, competency must be demonstrated in:

  • 30 units of competency:
  • 21 core units
  • 9 electives

The electives are to be chosen as follows:

  • all 8 units within Group A - Heritage, conservation and restoration stonemasonry
    or
  • all 7 units within Group B - New and contemporary works (building stonemasonry)
    or
  • all 5 units within Group C - Monumental stonemasonry
    or
  • all 4 units within Group D - Bench-tops
  • the remaining units can be selected from any elective group or the general electives as long as the units have not previously been selected
  • up to two elective units can be selected from any Training Package or accredited course, as long as they contribute to a valid, industry-supported vocational outcome and support the AQF level of this qualification.

Prerequisite units 

An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.

Core units 

CPCCCA3002*

Carry out setting out

CPCCCM2006

Apply basic levelling procedures

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCCM2012*

Work safely at heights

CPCCOM1012

Work effectively and sustainably in the construction industry

CPCCOM1013

Plan and organise work

CPCCOM1014

Conduct workplace communication

CPCCOM1015

Carry out measurements and calculations

CPCCOM2001*

Read and interpret plans and specifications

CPCCST2003*

Finish stone

CPCCST2004*

Lay stone

CPCCST2006*

Identify and use stone products

CPCCST2007*

Use stonemasonry tools, plant and equipment

CPCCST3001*

Dress and mould stone

CPCCST3002*

Shape solid stone

CPCCST3003*

Split stone manually

CPCCST3004*

Dress stone manually

CPCCST3006*

Machine stone

CPCCST3010*

Set out and cut letters in stone

CPCCST3022*

Carry out profile work

CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

Elective units 

Group A - Architectural heritage, conservation and restoration stonemasonry 

CPCCBL3016*

Construct battered masonry walls and piers

CPCCBL3017*

Carry out tuck pointing and repointing to masonry

CPCCST3017*

Construct stone arches

CPCCST3019*

Lay stonemasonry stairs

CPCCST3021*

Restore stone work

CPCCST3023

Apply drawing principles to stonemasonry

CPCCST3024*

Apply conservation principles and practices to heritage stonework

CPCCST3025*

Carry out basic stonemasonry demolition

Group B - Architectural new and contemporary works 

CPCCBL3016*

Construct battered masonry walls and piers

CPCCPA3001*

Prepare subgrade, base and bedding course for segmental paving

CPCCST3012*

Build stone veneer walls

CPCCST3016*

Build solid stonemasonry walls

CPCCST3017*

Construct stone arches

CPCCST3019*

Lay stonemasonry stairs

CPCCST3020*

Produce reconstituted stone 

Group C - Monumental 

CPCCCM2002*

Carry out hand excavation

CPCCST3011*

Plan monument construction

CPCCST3013*

Carry out cemetery monument fixing

CPCCST3015*

Apply gilding to stone

CPCCST3018*

Inlay lead to stone

Group D Bench-Tops 

CPCCCM2005*

Use construction tools and equipment

CPCCJN2001*

Assemble components

CPCCJN2003*

Package manufactured products for transport

CPCCST3009*

Use computer-controlled static machinery to produce stone components

General Elective Units 

BSBESB301

Investigate business opportunities

BSBESB407

Manage finances for new business ventures

CPCCCO2013*

Carry out concreting to simple forms

CPCCPA3002*

Lay segmental paving

CPCCPA3003*

Cut segmental paving

CPCCSC2002*

Erect and dismantle basic scaffolding

CPCCST2001*

Prepare for stonemasonry construction process

CPCCST2005*

Carry out load slinging of off-site materials

CPCCST3007*

Turn stone

CPCCST3009*

Use computer-controlled static machinery to produce stone components

CPCCST3014*

Set and anchor stone facades

CPCCST3016*

Build solid stonemasonry walls

CPCCST4001

Prepare to undertake the heritage restoration process

CPCCST4002

Undertake the heritage restoration process

CPCCST4003

Undertake preparations for refractory works

CPCCST4004

Initiate the heritage works process

CPCCST4005

Prepare drawings for heritage works

CPCCST4006

Prepare report for heritage restoration work

CPCCST4007

Construct a fire brick wall and arch using refractory materials

Qualification Mapping Information

CPC Construction, Plumbing and Services Training Package Release 5.0 

CPC08 Construction, Plumbing and Services Training Package 

Comments 

E/ 

NE 

CPC32320 Certificate III in Stonemasonry

CPC32313 Certificate III in Stonemasonry (Monumental/ Installation)

Supersedes and is equivalent to CPC32313 Certificate III in Stonemasonry (Monumental/Installation).

Updated qualification to meet Standards for Training Packages.

E

Links

An Implementation Guide to this Training Package is available at - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099- 030a5569b1ad