Qualification details

CPC31811 - Certificate III in Shopfitting (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 19/May/2011

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes CPC31808 - Certificate III in Shopfitting 20/May/2011
Is superseded by CPC31812 - Certificate III in ShopfittingRevised qualification deemed not equivalent to CPC31811 Core and elective units revised resulting in a number of unit identifier changes Code change to core unit: • CPCCSH3004A revised and not equivalent to CPCCSH3006A 06/Feb/2013

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
BSBSMB301A - Investigate micro business opportunitiesInvestigate micro business opportunities N/A
BSBSMB406A - Manage small business financesManage small business finances N/A
CPCCCA3001A - Carry out general demolition of minor building structuresCarry out general demolition of minor building structures N/A
CPCCCA3010A - Install and replace windows and doorsInstall and replace windows and doors N/A
CPCCCA3013A - Install lining, panelling and mouldingInstall lining, panelling and moulding N/A
CPCCCA3014A - Construct bulkheadsConstruct bulkheads N/A
CPCCCA3015A - Assemble partitionsAssemble partitions N/A
CPCCCM1012A - Work effectively and sustainably in the construction industryWork effectively and sustainably in the construction industry N/A
CPCCCM1013A - Plan and organise workPlan and organise work N/A
CPCCCM1014A - Conduct workplace communicationConduct workplace communication N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 42

Classifications

SchemeCodeClassification value
ANZSCO Identifier 331211 Carpenter And Joiner 
ASCO (occupation type) Identifier 4411-11 Carpenter And Joiner 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Off-site Construction 
Taxonomy - Occupation N/A Shopfitter 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 331211 Carpenter And Joiner 09/Feb/2012 
ASCO (occupation type) Identifier 4411-11 Carpenter And Joiner 09/Feb/2012 
ASCED Qualification/Course Field of Education Identifier 0403 Building 09/Feb/2012 
Qualification/Course Level of Education Identifier 514 Certificate III 19/May/2011 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Description

This qualification provides a trade outcome in shopfitting.

Occupational titles may include:

  • Shopfitter.

The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work.

The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.

Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

Pathways Information

Not Applicable

Licensing/Regulatory Information

Not Applicable

Entry Requirements

Not Applicable

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability skill 

Industry /enterprise requirements for this qualification include :

Communication

  • Communicates with clients, colleagues and others using effective and appropriate communication techniques, including:
  • Clear and direct communication
  • Active listening
  • Verbal and non-verbal language
  • Questioning to identify and confirm requirements
  • Language and concepts appropriate to cultural differences
  • Follows instructions from supervisor and other relevant persons
  • Understands, interprets and applies information as required from:
  • Regulatory, legislative, licensing and organisational requirements
  • Environmental and OHS requirements, including material safety data sheets (MSDS)
  • Codes and standards
  • Plans and drawings
  • Specifications
  • Safety signs and symbols
  • Organisational policies and procedures
  • Understands relevant definitions, terminology, symbols, abbreviations and language
  • Records relevant information using standard workplace documentation
  • Applies measurements and calculations using appropriate equipment, formulas and records as required
  • Reports and records hazards and risks

Teamwork

  • Works as part of a team
  • Provides assistance and encouragement to other team members
  • Initiates and encourages improvements in team performance
  • Identifies and utilises the strengths of other team members
  • Relates to people from diverse social, cultural and ethnic backgrounds and with varying physical and mental abilities
  • Coordinates and actions tasks
  • Participates in on-site meetings

Problem solving

  • Examines tools and equipment prior to use for damage, missing components or other defects
  • Identifies typical faults and problems and takes necessary remedial action
  • Rectifies simple faults with tools and equipment
  • Performs routine maintenance as required
  • Checks materials and products for conformity to specifications

Initiative and enterprise

  • Identifies opportunities to improve resource efficiency and makes suggestions as appropriate
  • Responds to change and workplace challenges
  • Puts ideas into action
  • Maximises use of resources by recycling, re-using or using appropriate disposal methods

Planning and organising

  • Identifies hazards and implements appropriate hazard control measures
  • Selects and uses appropriate materials, tools and equipment
  • Determines material quantity requirements
  • Prioritises and sequences tasks
  • Applies time management skills to ensure work is completed to time requirements

Self management

  • Evaluates own actions and makes judgements about performance and necessary improvements
  • Contributes to workplace responsibilities, such as current work site environmental/sustainability frameworks or management systems
  • Manages own performance to meet workplace standards
  • Seeks support to improve work performance
  • Cleans up work area, including tools and equipment

Learning

  • Identifies own learning needs and seeks skill development as required
  • Is open to learning new ideas and techniques

Technology

  • Uses calculators
  • Uses and operates a range of tools and equipment correctly and safely

Packaging Rules

Packaging rules 

To achieve this qualification, the candidate must demonstrate competency in:

  • 30 units of competency:
  • 19 core units
  • 11 elective units.

A maximum of two of the required eleven elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

Core units 

CPCCCM2004A

Handle construction materials

CPCCCM2005A

Use construction tools and equipment

CPCCCM1012A

Work effectively and sustainably in the construction industry

CPCCCM1013A

Plan and organise work

CPCCCM1014A

Conduct workplace communication

CPCCCM1015A

Carry out measurements and calculations

CPCCCM2001A

Read and interpret plans and specifications

CPCCCM2006A

Apply basic levelling procedures

CPCCOHS2001A

Apply OHS requirements, policies and procedures in the construction industry

Shopfitting field of work 

CPCCCA3010A

Install and replace windows and doors

CPCCJN3001A

Use static machines

CPCCJN3005A

Cut and install glass

CPCCSH2001A

Prepare surfaces

CPCCSH2002A

Use aluminium sections for fabrication

CPCCSH3001A

Set out and assemble cabinets, showcases, wall units, counters and workstations

CPCCSH3002A

Set out and fabricate shopfront commercial entries bulkheads and component fittings

CPCCSH3003A

Assemble and install shopfront commercial entries bulkheads and components

CPCCSH3004A

Apply finishes

CPCCSH3005A

Apply and trim decorative finishes

Elective units 

CPCCCA3001A

Carry out general demolition of minor building structures

CPCCCA3013A

Install lining, panelling and moulding

CPCCCA3014A

Construct bulkheads

CPCCCA3015A

Assemble partitions

CPCCCM2003B

Calculate and cost construction work

CPCCCM2007A

Use explosive power tools

CPCCCM2008A

Erect and dismantle restricted height scaffolding

CPCCCM2010A

Work safely at heights

CPCCCM3001B

Operate elevated work platforms

CPCCCO2013A

Carry out concreting to simple forms

CPCCJN3002A

Use computer-controlled machinery

CPCCJN3003A

Manufacture components for door and window frames and doors

CPCCPB3015A

Install acoustic and thermal environmental protection systems

CPCCSF2003A

Cut and bend materials using oxy-LPG equipment

CPCCSH2003A

Apply and install sealant and sealant devices

CPCCWC3004A

Install suspended ceilings

BSBSMB301A

Investigate micro business opportunities

BSBSMB406A

Manage small business finances

LMFFM3006B

Install furnishing products

LMFFM3013B

Measure and draw site layout for manufactured furniture products

LMFFM3028B

Fabricate synthetic solid surface products

LMFFM3030B

Set up, operate and maintain CNC sizing machines

LMFFM3031B

Set up, operate and maintain CNC machining and processing centres

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.