Modification History
|
Release 2 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 6.1. Unit code corrected in elective list: CPCSHP3007 Install prefabricated internal shopfitting units to CPCSHP3007 Install prefabricated internal shopfitting units. |
|
Release 1 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0. Supersedes and is equivalent to CPC31211 Certificate III in Wall and Ceiling Lining. Updated to meet the Standards for Training Packages. |
Qualification Description
This qualification provides a trade outcome in wall and ceiling lining for residential and commercial construction work. The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as the specialist field of work wall and ceiling liner. Wall and ceiling liners apply and fix linings for non-structural walls and ceilings.
Occupational titles may include:
- Wall and ceiling liner
- Drywaller
- Plasterer.
State and territory jurisdictions may have different licensing, legislative, regulatory or certification requirements. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
This qualification is suitable for an Australian apprenticeship pathway.
Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, the candidate must demonstrate competency in:
- 29 units of competency:
- 22 core units
- 7 elective units.
Electives must be selected as follows:
- all seven units from the electives listed below, or
- five units from the electives listed below, plus two units selected from any current training package or accredited course as long as they contribute to a valid, industry-supported vocational outcome, maintain the integrity of the AQF level of this qualification and do not duplicate the outcome of another unit used to achieve this qualification.
Prerequisite units
An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.
|
Core units |
|
|
CPCCCA3014* |
Construct and install bulkheads |
|
CPCCCA3026* |
Assemble partitions |
|
CPCCOM2001 |
Read and interpret plans and specifications |
|
CPCCCM2012* |
Work safely at heights |
|
CPCCOM1012 |
Work effectively and sustainably in the construction industry |
|
CPCCOM1013 |
Plan and organise work |
|
CPCCOM1014 |
Conduct workplace communication |
|
CPCCOM1015 |
Carry out measurements and calculations |
|
CPCCPB3001* |
Fix standard plasterboard wall sheets |
|
CPCCPB3002* |
Fix standard plasterboard ceiling sheets |
|
CPCCPB3003* |
Fix battens |
|
CPCCPB3004* |
Fix wet area sheets |
|
CPCCPB3005* |
Fix ceiling sheets to external protected areas |
|
CPCCPB3006* |
Fix fibre cement board |
|
CPCCPB3007* |
Apply levels of finish standards to planning and inspection of own work |
|
CPCCPB3008* |
Mix plastering compounds |
|
CPCCPB3009* |
Finish plasterboard joints manually |
|
CPCCPB3010* |
Manually sand plaster work |
|
CPCCPB3012* |
Cut and fix paper-faced cornices |
|
CPCCWC3003* |
Install dry wall passive fire-rated systems |
|
CPCCWC3004* |
Install suspended ceilings |
|
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
|
Elective units |
|
|
BSBESB301 |
Investigate business opportunities |
|
BSBESB407 |
Manage finances for new business ventures |
|
CPCCCA3001* |
Carry out general demolition of minor building structures |
|
CPCCCA3010* |
Install windows and doors |
|
CPCCCM2006 |
Apply basic levelling procedures |
|
CPCCCM2007* |
Use explosive power tools |
|
CPCCCM2008* |
Erect and dismantle restricted height scaffolding |
|
CPCCCM3001 |
Operate elevated work platforms up to 11 metres |
|
CPCCPB3014* |
Install bulk insulation and pliable membrane products |
|
CPCCPB3015* |
Install acoustic and thermal environmental protection systems |
|
CPCCPB3016* |
Install and finish columns |
|
CPCCPB3017* |
Rectify faults in drywall applications |
|
CPCCPB3018* |
Use vacuum and electric sanding equipment to finish plaster work |
|
CPCCPB3019* |
Inspect equipment for serviceability |
|
CPCCPB3020* |
Match, mitre and install cast ornamental cornices |
|
CPCCPB3021* |
Install and fix residential acoustic plaster products |
|
CPCCPB3022* |
Use mechanical jointing equipment to finish joints |
|
CPCCPB3027* |
Install ceiling insulation products |
|
CPCCSP3003* |
Apply trowelled texture coat finishes |
|
CPCCSP3005* |
Install pre-cast decorative mouldings |
|
CPCCWC2001* |
Complete penetrations and flashings |
|
CPCCWC3001* |
Install and finish plasterboard and fibre cement sheeting to curved wall and ceiling substrates |
|
CPCCWC3002* |
Install and finish plasterboard and fibre cement sheeting to arch substrates |
|
CPCSHP3007* |
Install prefabricated internal shopfitting units |
Qualification Mapping Information
|
CPC Construction, Plumbing and Services Training Package 5.0 |
CPC08 Construction, Plumbing and Services Training Package |
Comments |
E/NE |
|
CPC31220 Certificate III in Wall and Ceiling Lining |
CPC31211 Certificate III in Wall and Ceiling Lining |
Supersedes and is equivalent to CPC31211 Certificate III in Wall and Ceiling Lining. Updated to meet the Standards for Training Packages 2012. |
E |
Links
The Companion Volume Implementation Guide for the CPC Construction, Plumbing and Services Training Package is available at - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad
