Qualification details

CPC30318 - Certificate III in Concreting (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 17/Jan/2019

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to CPC30313 - Certificate III in ConcretingSupersedes and replaces CPC30313 Certificate III in Concreting. 16/Jan/2019


Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
CPCCCA2003 - Erect and dismantle formwork for footings and slabs on groundErect and dismantle formwork for footings and slabs on ground Core
CPCCCA3001 - Carry out general demolition of minor building structuresCarry out general demolition of minor building structures Elective
CPCCCM1012 - Work effectively and sustainably in the construction industryWork effectively and sustainably in the construction industry Core
CPCCCM1013 - Plan and organise workPlan and organise work Core
CPCCCM1014 - Conduct workplace communicationConduct workplace communication Core
CPCCCM1015 - Carry out measurements and calculationsCarry out measurements and calculations Core
CPCCCM1016 - Identify requirements for safe tilt-up workIdentify requirements for safe tilt-up work Elective
CPCCCM2001 - Read and interpret plans and specificationsRead and interpret plans and specifications Core
CPCCCM2006 - Apply basic levelling proceduresApply basic levelling procedures Core
CPCCCM2007 - Use explosive power toolsUse explosive power tools Elective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 34

Classifications

SchemeCodeClassification value
ANZSCO Identifier 821211 Concreter 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Building Trades 
Taxonomy - Occupation N/A Concrete Pump Operator,Concreter 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 821211 Concreter 17/Jan/2019 
ASCED Qualification/Course Field of Education Identifier 0403 Building 17/Jan/2019 
Qualification/Course Level of Education Identifier 514 Certificate III 17/Jan/2019 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1.

Supersedes and replaces CPC30313 Certificate III in Concreting.

The unit of competency was updated to the Standards for Training Packages 2012.

This version first released with CPC Construction, Plumbing and Services Training Package Version 4.0.

Qualification Description

This qualification reflects the role of concreters working in concreting operations on residential and commercial projects.

Occupational titles include:

  • concreter
  • concrete tilt panel fabricator.

The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work (i.e. concreting).

The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in an actual workplace or very closely simulated workplace environment, and this qualification requires all units of competency to be delivered in this context.

Licensing, legislative, regulatory or certification requirements apply to concreting in some states and territories. Relevant state and territory regulatory authorities should be consulted to confirm these requirements.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To achieve this qualification, competency must be demonstrated in:

  • 20 units of competency:
  • 15 core units
  • 5 elective units.

The elective units must ensure the integrity of the AQF qualification level, contribute to a valid, industry-supported vocational outcome, and are to be chosen as follows:

  • a minimum of three elective units must be chosen from the Group A concreting elective units listed below
  • the remaining two elective units may be chosen from:
  • the remaining Group A concreting elective units listed below
  • the Group B general elective units listed below
  • other units packaged in a Certificate III or Certificate IV qualification in the CPC Construction, Plumbing and Services Training Package, CPC08 Construction, Plumbing and Services Training Package, or other current Training Packages or accredited courses provided they do not duplicate the outcome of another unit already chosen for the qualification.

Prerequisite units of competency 

An asterisk against a unit code below indicates that there is a prerequisite requirement that must be met.

In this instance, all units with an asterisk have the following unit as a prerequisite unit:

  • CPCCWHS2001 Apply OHS requirements, policies and procedures in the construction industry.

This prerequisite unit must be assessed before assessment of any unit of competency with an asterisk; therefore, it is recommended that the prerequisite unit be the first unit delivered and assessed in the qualification.

Core units 

CPCCCA2003*

Erect and dismantle formwork for footings and slabs on ground

CPCCCM1012

Work effectively and sustainably in the construction industry

CPCCCM1013

Plan and organise work

CPCCCM1014

Conduct workplace communication

CPCCCM1015

Carry out measurements and calculations

CPCCCM2001

Read and interpret plans and specifications

CPCCCM2006

Apply basic levelling procedures

CPCCCO2021*

Handle concreting materials

CPCCCO2022*

Select, check and maintain concreting plant, tools and equipment

CPCCCO3041*

Place concrete

CPCCCO3042*

Finish concrete

CPCCCO3043*

Cure concrete

CPCCCO3053*

Slump-test concrete

CPCCSF2004*

Place and fix reinforcement materials

CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

Group A: Concreting elective units 

CPCCCO3035*

Assess and specify concrete supply requirements

CPCCCO3036*

Plan concrete work and brief team

CPCCCO3044*

Apply decorative finishes to concrete

CPCCCO3046*

Repair and rectify concrete

CPCCCO3047*

Cut and core concrete

CPCCCO3048*

Construct tilt panels on site

CPCCCO3049*

Apply and finish sprayed concrete

CPCCCO3050*

Carry out high performance concreting

CPCCCO3051*

Conduct off-form vertical concrete operations

CPCCCO3052*

Conduct concrete boom delivery operations

CPCCCO3054*

Operate concrete agitator trucks

CPCCCO3055*

Install topping slabs

Group B: General elective units 

CPCCCA3001*

Carry out general demolition of minor building structures

CPCCCM1016

Identify requirements for safe tilt-up work

CPCCCM2007*

Use explosive power tools

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCLBM3001

Licence to operate a concrete placing boom

CPCCSF2003*

Cut and bend materials using oxy-LPG equipment

CPCCSF3001*

Apply reinforcement schedule

Qualification Mapping Information

Code and Title 

CPC08 Construction, Plumbing and Services Training Package 

Comments 

Equivalency statement 

CPC30318 Certificate III in Concreting

CPC30313 Certificate III in Concreting

Supersedes and replaces CPC30313 Certificate III in Concreting.

E

Links

An Implementation Guide to this Training Package is available at - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad.

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.