Modification History
|
Release 1 |
This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0. Supersedes and is equivalent to CPC20211 Certificate II in Construction Pathways. Updated to meet the Standards for Training Packages. |
Qualification Description
This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes are predominantly achieved through an Australian Apprenticeship and this qualification allows for inclusion of skills suited for entry to off-site occupations, such as joinery as well as carpentry, bricklaying and other occupations in general construction.
This qualification is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Apprenticeship.
The qualification has core unit of competency requirements that are required in most Certificate III qualifications. The elective options are structured to allow choice from areas of trade skills as an introduction to a range of occupations.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, competency in one of the two occupational streams must be achieved.
- Construction Pathways
For the award of the CPC20220 Certificate II in Construction Pathways, the candidate must demonstrate competency in 10 units of competency:
- 5 core units
- 5 elective units.
Elective units are to be chosen from at least two but no more than four of groups A to I.
One elective may be chosen from any current training package or accredited course as long as it contributes to a valid industry-supported vocational outcome, maintains the AQF level of this qualification, and does not replicate the content of another unit used to achieve this qualification.
- Remote Area Building
For the award of the CPC20220 Certificate II in Construction Pathways (Remote Area Building), the candidate must demonstrate competency in a minimum of 10 units of competency:
- 5 core units
- 5 units can be selected from Group I.
Prerequisite units of competency
An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.
Core units
|
CPCCOM1012 |
Work effectively and sustainably in the Construction Industry |
|
CPCCOM1013 |
Plan and organise work |
|
CPCCOM1015 |
Carry out measurements and calculations |
|
CPCCVE1011 |
Undertake a basic construction project |
|
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the Construction Industry |
|
Elective units |
|
|
Group A: Brick and blocklaying |
|
|
CPCCBL2001* |
Handle and prepare bricklaying and blocklaying materials |
|
CPCCBL2002* |
Use bricklaying and blocklaying tools and equipment |
|
Group B: Carpentry |
|
|
CPCCCA2002* |
Use carpentry tools and equipment |
|
CPCCCA2011* |
Handle carpentry materials |
|
Group C: Solid plastering (maximum one unit from this group) |
|
|
CPCCSP2001* |
Handle solid plastering materials |
|
CPCCSP2002* |
Use solid plastering tools and equipment |
|
Group D: Wall and floor tiling (maximum one unit from this group) |
|
|
CPCCCM2013* |
Undertake basic installation of wall tiles |
|
CPCCWF2002* |
Use wall and floor tiling tools and equipment |
|
Group E: Waterproofing (maximum one unit from this group) |
|
|
CPCCWP2001* |
Handle waterproofing materials |
|
CPCCWP2002* |
Use waterproofing tools and equipment |
|
Group F: Joinery (maximum one unit from this group) |
|
|
CPCCJN2001* |
Assemble components |
|
CPCCJN3004* |
Manufacture and assemble joinery components |
|
Group G: Stonemasonry (maximum one unit from this group) |
|
|
CPCCST2006* |
Identify and use stone products |
|
CPCCST2007* |
Use stonemasonry tools, plant and equipment |
|
Group H: Painting and decorating (maximum one unit from this group) |
|
|
CPCCPD2011* |
Handle and store painting and decorating materials |
|
CPCCPD2012* |
Use painting and decorating tools and equipment |
|
Group I: General elective units |
|
|
CPCCCM1011 |
Undertake basic estimation and costing |
|
CPCCCM2004* |
Handle construction materials |
|
CPCCCM2006 |
Apply basic levelling procedures |
|
CPCCCM2009* |
Carry out basic demolition |
|
CPCCCM2012* |
Work safely at heights |
|
CPCCCO2013* |
Carry out concreting to simple forms |
|
CPCCJN3100* |
Process materials to produce components using static machines |
|
CPCCPD3021* |
Prepare existing coated surfaces for painting |
|
CPCCPD3022* |
Apply paint by brush and roller |
|
CPCCSH2003* |
Apply and install sealant and sealant devices |
|
CPCCSP2003* |
Prepare surfaces for plastering |
|
CPCCWF3004* |
Repair wall and floor tiles |
|
CPCPCM2043A |
Carry out WHS requirements |
|
CPCPRF2022A* |
Select and install roof sheeting and wall cladding |
|
MEM05050* MEM1101 MEM13015 MEM16006 |
Perform routine gas metal arc welding Undertake manual handling Work safely and effectively in manufacturing and engineering Organise and communicate information |
|
RIICCM210D |
Install trench support |
|
RIIWHS205D |
Control traffic with stop-slow bat |
|
RIIWMG203D |
Drain and dewater civil construction site |
|
UEERL0003* |
Conduct in-service safety testing of electrical cord connected equipment and cord assemblies |
|
UEECD0007 |
Apply work health and safety regulations, codes and practices in the workplace |
Qualification Mapping Information
|
CPC Construction, Plumbing and Service Training Package Release 5.0 |
CPC08 Construction, Plumbing and Services Training Package |
Comments |
E/NE |
|
CPC20220 Certificate II in Construction Pathways |
CPC20211 Certificate II in Construction Pathways |
Supersedes and is equivalent to CPC20211 Certificate II in Construction Pathways. Updated to meet the Standards for Training Packages 2012. |
E |
Links
The Companion Volume Implementation Guide for the CPC Construction, Plumbing and Services Training Package is available at - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad
