^

 
 

Qualification details

CPC20220 - Certificate II in Construction Pathways (Release 5)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to CPC20211 - Certificate II in Construction PathwaysSupersedes and is equivalent to CPC20211 Certificate II in Construction Pathways. 26/Nov/2020

Release Status:
Current
Releases:
ReleaseRelease date
5 (this release) 06/May/2021
(View details for release 4) 09/Mar/2021
(View details for release 3) 15/Jan/2021
(View details for release 2) 23/Dec/2020
(View details for release 1) 27/Nov/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
CPCCSP2003 - Prepare surfaces for plasteringPrepare surfaces for plasteringElective
MEM16006 - Organise and communicate informationOrganise and communicate informationElective
RIICCM210E - Install trench supportInstall trench supportElective
CPCCPD2011 - Handle and store painting and decorating materialsHandle and store painting and decorating materialsElective
CPCCCM2012 - Work safely at heightsWork safely at heightsElective
CPCCST2007 - Use stonemasonry tools, plant and equipmentUse stonemasonry tools, plant and equipmentElective
CPCCVE1011 - Undertake a basic construction projectUndertake a basic construction projectCore
CPCCSP2001 - Handle solid plastering materialsHandle solid plastering materialsElective
CPCCJN3004 - Manufacture and assemble joinery componentsManufacture and assemble joinery componentsElective
UEERL0003 - Conduct in-service safety testing of electrical cord connected equipment and cord assembliesConduct in-service safety testing of electrical cord connected equipment and cord assembliesElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 43

Classifications

SchemeCodeClassification value
ANZSCO Identifier 821111 Builder's Labourer 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Building and Construction 
Taxonomy - Occupation N/A No Specific Job Role 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 821111 Builder's Labourer 27/Nov/2020 
ASCED Qualification/Course Field of Education Identifier 0403 Building 27/Nov/2020 
Qualification/Course Level of Education Identifier 521 Certificate II 27/Nov/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 5

This version first released with CPC Construction, Plumbing and Services Training Package Release 6.3.

Unit CPCCVE1011 Undertake a basic construction project marked with an asterisk as a prerequisite requirement must be met.

Release 4

This version first released with CPC Construction, Plumbing and Services Training Package Release 6.2.

Imported unit codes updated in Elective list:

  • RIICCM210D Install trench support to RIICCM210E Install trench support
  • RIIWMG203D Drain and dewater civil construction site to RIIWMG203E Drain and dewater civil construction sites.

Release 3

This version first released with CPC Construction, Plumbing and Services Training Package Release 6.1.

Imported unit code corrected in Group I elective list: RIIWHS205D Control traffic with stop-slow bat to RIIWHS205E Control traffic with stop-slow bat.

Release 2

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.1.

Group I: General elective unit list is updated by removing "A" from the unit codes CPCPCM2043 and CPCPRF2022 and adding CPCPCM2055 Work safely on roofs as prerequisite requirement.

Release 1

This version first released with CPC Construction, Plumbing and Services Training Package Release 5.0.

Supersedes and is equivalent to CPC20211 Certificate II in Construction Pathways. Updated to meet the Standards for Training Packages.

Qualification Description

This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes are predominantly achieved through an Australian Apprenticeship and this qualification allows for inclusion of skills suited for entry to off-site occupations, such as joinery as well as carpentry, bricklaying and other occupations in general construction.

This qualification is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Apprenticeship.

The qualification has core unit of competency requirements that are required in most Certificate III qualifications. The elective options are structured to allow choice from areas of trade skills as an introduction to a range of occupations.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To achieve this qualification, competency in one of the two occupational streams must be achieved.

  • Construction Pathways 

For the award of the CPC20220 Certificate II in Construction Pathways, the candidate must demonstrate competency in 10 units of competency:

  • 5 core units
  • 5 elective units.

Elective units are to be chosen from at least two but no more than four of groups A to I.

One elective may be chosen from any current training package or accredited course as long as it contributes to a valid industry-supported vocational outcome, maintains the AQF level of this qualification, and does not replicate the content of another unit used to achieve this qualification.

  • Remote Area Building 

For the award of the CPC20220 Certificate II in Construction Pathways (Remote Area Building), the candidate must demonstrate competency in a minimum of 10 units of competency:

  • 5 core units
  • 5 units can be selected from Group I.

Prerequisite units of competency  

An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.

Core units 

CPCCOM1012

Work effectively and sustainably in the Construction Industry

CPCCOM1013

Plan and organise work

CPCCOM1015

Carry out measurements and calculations

CPCCVE1011*

Undertake a basic construction project

CPCCWHS2001

Apply WHS requirements, policies and procedures in the Construction Industry

Elective units 

Group A: Brick and blocklaying  

CPCCBL2001*

Handle and prepare bricklaying and blocklaying materials

CPCCBL2002*

Use bricklaying and blocklaying tools and equipment

Group B: Carpentry  

CPCCCA2002*

Use carpentry tools and equipment

CPCCCA2011*

Handle carpentry materials

Group C: Solid plastering (maximum one unit from this group) 

CPCCSP2001*

Handle solid plastering materials

CPCCSP2002*

Use solid plastering tools and equipment

Group D: Wall and floor tiling  (maximum one unit from this group) 

CPCCCM2013*

Undertake basic installation of wall tiles

CPCCWF2002*

Use wall and floor tiling tools and equipment

Group E: Waterproofing  (maximum one unit from this group) 

CPCCWP2001*

Handle waterproofing materials

CPCCWP2002*

Use waterproofing tools and equipment

Group F: Joinery (maximum one unit from this group) 

CPCCJN2001*

Assemble components

CPCCJN3004*

Manufacture and assemble joinery components

Group G: Stonemasonry  (maximum one unit from this group) 

CPCCST2006*

Identify and use stone products

CPCCST2007*

Use stonemasonry tools, plant and equipment

Group H: Painting and decorating (maximum one unit from this group) 

CPCCPD2011*

Handle and store painting and decorating materials

CPCCPD2012*

Use painting and decorating tools and equipment

Group I: General elective units  

CPCCCM1011

Undertake basic estimation and costing

CPCCCM2004*

Handle construction materials

CPCCCM2006

Apply basic levelling procedures

CPCCCM2009*

Carry out basic demolition

CPCCCM2012*

Work safely at heights

CPCCCO2013*

Carry out concreting to simple forms

CPCCJN3100*

Process materials to produce components using static machines

CPCCPD3021*

Prepare existing coated surfaces for painting

CPCCPD3022*

Apply paint by brush and roller

CPCCSH2003*

Apply and install sealant and sealant devices

CPCCSP2003*

Prepare surfaces for plastering

CPCCWF3004*

Repair wall and floor tiles

CPCPCM2043

Carry out WHS requirements

CPCPCM2055

Work safely on roofs

CPCPRF2022*

Select and install roof sheeting and wall cladding

MEM05050*

Perform routine gas metal arc welding

MEM1101

Undertake manual handling

MEM13015

Work safely and effectively in manufacturing and engineering

MEM16006

Organise and communicate information

RIICCM210E

Install trench support

RIIWHS205E

Control traffic with stop-slow bat

RIIWMG203E

Drain and dewater civil construction site

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

UEERL0003*

Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

Qualification Mapping Information

CPC Construction, Plumbing and Service Training Package Release 5.0 

CPC08 Construction, Plumbing and Services Training Package 

Comments 

E/NE 

CPC20220 Certificate II in Construction Pathways

CPC20211 Certificate II in Construction Pathways

Supersedes and is equivalent to CPC20211 Certificate II in Construction Pathways.

Updated to meet the Standards for Training Packages 2012.

E

Links

The Companion Volume Implementation Guide for the CPC Construction, Plumbing and Services Training Package is available at - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=7e15fa6a-68b8-4097-b099-030a5569b1ad