Unit of competency
Modification History
Release |
Comment |
Release 1 |
New unit of competency. |
Application
This unit describes the performance outcomes required to remove and manufacture or repair a vehicle head lining. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, manufacturing or repairing a vehicle head lining, replacing it according to manufacturer specifications, and completing workplace processes and documentation.
It applies to those working in the automotive and marine trimming industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Competency Field
Vehicle body
Unit Sector
Technical - Trimming and Upholstery
Elements and Performance Criteria
Elements Elements describe the essential outcomes. |
Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare for work |
1.1 Job requirements are determined from workplace instructions 1.2 Manufacturer specifications and workplace procedures are accessed and interpreted 1.3 Hazards associated with the work are identified and risks are managed 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability 1.5 Work is planned to minimise waste and use time efficiently |
2. Remove head lining |
2.1 Fittings are removed in preparation for removing head lining 2.2 Head lining is removed using vehicle manufacturer recommended tools, equipment and procedures 2.3 Activities are completed according to safety and environmental requirements and without causing damage to vehicle or components |
3. Manufacture or repair head lining |
3.1 Materials are selected according to workplace instructions and customer requirements 3.2 Manufacturing, repair and attachment methods are identified 3.3 Templates are produced from workplace instructions or head lining sample 3.4 Materials are measured, marked and cut according to workplace instructions 3.5 Head lining is manufactured or repaired according to workplace procedures and safety and environmental requirements |
4. Replace head lining |
4.1 Head lining is replaced using vehicle manufacturer recommended tools, equipment and procedures 4.2 Fittings are replaced after installing head lining according to safety and environmental requirements and without causing damage to vehicle or components |
5. Complete work processes |
5.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 5.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 5.4 Workplace documentation is processed according to workplace procedures |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills |
Description |
Learning skills to: |
|
Writing skills to: |
|
Oral communication skills to: |
|
Numeracy skills to: |
|
Planning and organising skills to: |
|
Technology skills to: |
|
Range of Conditions
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include: |
|
Unit Mapping Information
Equivalent to AURVTT3010 Remove and replace vehicle head lining
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1