^
 
 

Unit of competency details

AURVTT006 - Apply trimming adhesives (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to AURVTT2006 - Select and apply trim and fabric adhesives 13/Apr/2016

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 14/Apr/2016

Companion volumes:
Unit of competency Assessment requirements

Delivery:
Find RTOs approved to deliver this unit of competency.

Training packages that include this unit

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnUsage RecommendationRelease
MEA41118 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentSuperseded1 
MEA41119 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentSuperseded1 
MEA30322 - Certificate III in Aircraft Life Support and FurnishingCertificate III in Aircraft Life Support and FurnishingCurrent1 
AUR20420 - Certificate II in Automotive Electrical TechnologyCertificate II in Automotive Electrical TechnologyCurrent1-2 
AUR20416 - Certificate II in Automotive Electrical TechnologyCertificate II in Automotive Electrical TechnologySuperseded1-2 
AUR20916 - Certificate II in Automotive Body Repair TechnologyCertificate II in Automotive Body Repair TechnologySuperseded1-2 
AUR20920 - Certificate II in Automotive Body Repair TechnologyCertificate II in Automotive Body Repair TechnologyCurrent1-2 
MEA41122 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentCurrent1 
MEA30318 - Certificate III in Aircraft Life Support and FurnishingCertificate III in Aircraft Life Support and FurnishingSuperseded1 
Refresh information in 'Table listing Qualifications that include this unit'
Navigate to first page in table listing Qualifications that include this unit.Navigate to previous page in table listing Qualifications that include this unit.
Navigate to page 1 in table listing Qualifications that include this unit
Navigate to the next page in table listing Qualifications that include this unit.Navigate to the last page in table listing Qualifications that include this unit.
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 9 of 9

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030513 Upholstery And Vehicle Trimming  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030513 Upholstery And Vehicle Trimming  09/Aug/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Content

Compare:
Compare content of this unit of competency with other releases or training components
Download:

Unit of competency

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Application

This unit describes the performance outcomes required to select and apply trim adhesives. It involves preparing for the task, including preparing surfaces, selecting and applying adhesives to specifications, removing excess adhesive, and completing workplace processes and documentation.

It applies to those working in the automotive and marine trimming industry.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Competency Field

Vehicle body

Unit Sector

Technical - Trimming and Upholstery

Elements and Performance Criteria

Elements 

Elements describe the essential outcomes.

Performance Criteria 

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to apply trim adhesives

1.1 Job requirements are determined from workplace instructions

1.2 Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Prepare surfaces and apply adhesive

2.1 Adhesive is selected according to manufacturer recommendation, trim and material type

2.2 Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements

2.3 Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements 

3. Complete work processes

3.1 Final adhesive selection is made and presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.

Skills 

Description 

Learning skills to:
  • locate appropriate sources of information efficiently.

Writing skills to:
  • legibly and accurately fill out workplace documentation.

Oral communication skills to:
  • clarify instructions and procedures.

Numeracy skills to:
  • use basic mathematical operations, including addition, subtraction, multiplication and division, to calculate:
  • adhesive quantities
  • ratios for mixing adhesives
  • measure accurately using metric and imperial measuring equipment.

Planning and organising skills to:
  • plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes.

Technology skills to:
  • use specialist adhesive tools and equipment.

Range of Conditions

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements  must include:
  • work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
  • selecting and using PPE
  • using specialist tools and equipment
  • using SDS for adhesives
  • handling and storing adhesives
  • environmental requirements, including procedures for storing and disposing of waste materials and adhesives.

Unit Mapping Information

Equivalent to AURVTT2006 Select and apply trim and fabric adhesives

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

 

Assessment requirements

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

  • apply trim adhesives to three different vehicle or vessel components, in which the work must involve:
  • one vehicle or marine fixed cover
  • one vehicle or marine carpet section.

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

  • work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying trimming adhesives, including procedures for:
  • selecting and using personal protective equipment (PPE)
  • using specialist tools and equipment
  • using safety data sheets (SDS) for adhesives
  • handling and storing adhesives
  • environmental requirements, including procedures for storing and disposing of waste adhesives
  • types and uses of specialist trimming tools and equipment
  • adhesive types required for different materials, including:
  • polyvinyl chloride (PVC)
  • fabric
  • leather
  • adhesive application techniques, including:
  • surface preparation
  • application
  • cleaning
  • procedures for protecting vehicle and components when applying trim adhesives.

Assessment Conditions

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicles where they have applied trim adhesives, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

  • automotive or marine trimming workplace or simulated workplace
  • workplace instructions
  • SDS for adhesives
  • PPE required to apply trim adhesives
  • adhesives for PVC, fabric and leather
  • PVC, fabric and leather materials
  • three different vehicles or vessels with components requiring trimming
  • tools, equipment and materials appropriate for applying trim, materials and adhesives.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Back to top