Unit of competency
Modification History
|
Release |
Comment |
|
Release 1 |
New unit of competency. |
Application
This unit describes the performance outcomes required to set up and use a universal measuring system to measure vehicle chassis misalignment at pre- and post-repair intervals. It involves preparing for the task, selecting and using specialist tools and equipment, setting measuring equipment, measuring vehicle upper and underbody in three dimensions, and completing workplace processes and documentation.
It applies to those working in the automotive body repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Competency Field
Vehicle Body
Unit Sector
Technical - Body
Elements and Performance Criteria
|
Elements Elements describe the essential outcomes. |
Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
|
1. Prepare to set up and operate universal measuring system |
1.1 Job requirements are determined from workplace instructions 1.2 Set-up information is accessed and interpreted 1.3 Hazards associated with the work are identified and risks are managed 1.4 Measuring equipment is selected, set up , and calibrated and checked for serviceability 1.5 Work is planned to complete job requirements efficiently |
|
2. Carry out measurement activities |
2.1 Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements 2.2 Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components 2.3 Pre- and post-repair measurements are recorded according to workplace procedures |
|
3. Complete measurement processes |
3.1 Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 3.3 Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures 3.4 Workplace documentation is processed according to workplace procedures |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
|
Skills |
Description |
|
Learning skills to: |
|
|
Writing skills to: |
|
|
Oral communication skills to: |
|
|
Numeracy skills to: |
|
|
Planning and organising skills to: |
|
|
Technology skills to: |
|
Range of Conditions
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
|
Set-up information must include: |
|
|
Measuring equipment must include: |
|
|
Set up must comply with: |
|
|
Safety requirements must include: |
|
|
Three dimensions of measurement must include: |
|
Unit Mapping Information
Equivalent to AURVTN3029 Set up and operate universal measuring systems
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1
