^

 
 

Unit of competency details

AURV231786AA - Wash/clean vehicle body and door cavities (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to AURVTN2008 - Clean vehicle body and door cavities 16/Jan/2013

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 21/Jun/2011

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 039909 Cleaning  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 039909 Cleaning  18/Nov/2005 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit of competency covers the skills and knowledge required to wash vehicle body exterior and clean door jambs, boot and bonnet surrounds and inner sill panels.

Application of the Unit

Application of the unit 

The unit includes identification and confirmation of work requirements, preparation for work, washing/cleaning of vehicle body and door cavities, and completion of work finalisation processes, including clean-up and documentation.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare for work

1.1. Work instructions are used to determine work requirements, including method, material and equipment.

1.2. Job specifications are read and interpreted.

1.3. Occupational health and safety (OHS) requirements, including personal protection needs are observed throughout the work.

1.4. Material for work is selected.

1.5. Equipment and tooling are identified and checked for safe and effective operation.

1.6. Procedures are determined to minimise waste material.

1.7. Procedures are identified for maximising energy efficiency while completing the work.

2. Wash/clean vehicle body exterior

2.1. Tooling and equipment are selected and used according to workplace methods and customer requirements.

2.2. Cleaning and protection agents are selected and used according to vehicle finish type, workplace methods and product manufacturer/component supplier recommended applications.

2.3. Vehicle body exterior is washed and cleaned according to workplace/customer and product manufacturer/component supplier prescribed methods and procedures.

2.4. Washing/cleaning is completed without causing damage to component or system.

2.5. Vehicle body exterior is washed and cleaned according to industry standards/regulations/guidelines, OHS requirements, legislation and enterprise procedures/ policies.

2.6. Cleaning and protection agents are stored according to manufacturer/component supplier recommendations and regulatory requirements.

3. Wash/clean door jambs, boot and bonnet surrounds and inner sill panels

3.1. Tooling and equipment are selected and used according to workplace methods and customer requirements.

3.2. Cleaning/protection agents are selected and used according to vehicle finish type, workplace methods and product manufacturer/component supplier recommended applications.

3.3. Vehicle body door/boot cavities are washed and cleaned according to workplace/customer and product manufacturer/component supplier prescribed methods and procedures.

3.4. Washing/cleaning is completed without causing damage to component or system.

3.5. Vehicle door jambs, boot and bonnet surrounds and inner sills are washed and cleaned according to industry standards/regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies.

3.6. Cleaning/protection agents are stored according to manufacturer/component supplier recommendations and regulatory requirements.

4. Clean up work area and maintain equipment

4.1. Material that can be reused is collected and stored.

4.2. Waste material is removed following workplace and environmental procedure.

4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures.

4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace requirements.

4.5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures.

4.6. Tooling is maintained in accordance with workplace procedures.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Required skills include:

  • collect, organise and understand information related to work orders, plans and safety procedures for washing a vehicle
  • identifying safety precautions
  • identifying recommended washing and body protection agents applications and procedures
  • communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with worksite supervisor, other workers and customers, and the reporting of work outcomes and problems
  • reading and interpreting product labels and directions
  • listening and following verbal instructions
  • plan and organise activities, including preparation and layout of worksite and obtaining of equipment and material to avoid backtracking, workflow interruptions or wastage
  • work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity
  • establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and wastage
  • use mathematical ideas and techniques to complete measurements and estimate material requirements required for the work, including measuring and mixing cleaning and protection fluids
  • use workplace technology related to the washing/cleaning of vehicle bodies, including the use of measuring equipment and communication devices and the reporting/documenting of results

Required knowledge 

Required knowledge includes:

  • OHS regulations/requirements, equipment, material and personal safety requirements
  • environmental requirements for storage, handling and disposal of substances
  • material safety data sheets
  • cleaning/body protection agents and their recommended applications
  • washing and cleaning procedures for vehicle body exterior, door jambs, boot and bonnet surrounds and inner sill panels
  • work organisation and planning processes
  • enterprise quality processes

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

  • observing safety procedures and requirements
  • communicating effectively with others involved in or affected by the work
  • selecting methods and techniques appropriate to the circumstances
  • completing preparatory activity in a systematic manner
  • selecting and using appropriate material and equipment
  • washing and cleaning a range of vehicle body exteriors, door jambs, boot and bonnet surrounds and inner sill panels.

Context of , and specific resources for assessment 

  • Application of competence is to be assessed in the workplace or simulated worksite.
  • Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.
  • Assessment is to comply with regulatory requirements, including Australian standards.
  • The following resources should be made available:
  • workplace location or simulated workplace
  • materials relevant to the washing/cleaning of vehicle bodies
  • equipment, hand and power tooling appropriate to the washing/cleaning of vehicle bodies
  • activities covering mandatory task requirements
  • specifications and work instructions.

Method of assessment 

  • Assessment must satisfy the endorsed Assessment Guidelines of AUR05 Automotive Industry Retail, Service and Repair Training Package.
  • Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge.
  • Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies.
  • Assessment may be applied under project-related conditions and require evidence of process.
  • Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
  • It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements.
  • Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Vehicle body and door cavities 

Vehicle body and door cavities are to include:

  • body exterior
  • door jambs
  • boot and bonnet surrounds
  • inner sill panels

Methods 

Methods are to include:

  • manual or machine assisted washing

OHS 

OHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include:

  • protective clothing and equipment
  • use of tooling and equipment
  • workplace environment and safety
  • handling of material
  • use of firefighting equipment
  • enterprise first aid
  • hazard control and hazardous material and substances

Personal protective equipment 

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures 

Safe operating procedures are to include, but are not limited to:

  • operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and worksite visitors

Emergency procedures 

Emergency procedures related to this unit are to include, but are not limited to:

  • emergency shutdown and stopping of equipment
  • extinguishing fires
  • enterprise first aid requirements
  • worksite evacuation

Environmental requirements 

Environmental requirements are to include, but are not limited to:

  • waste management, noise, dust and clean-up management

Quality requirements 

Quality requirements are to include, but are not limited to:

  • regulations, including Australian standards
  • internal company quality policies and standards
  • enterprise operations and procedures

Statutory /regulatory authorities 

Statutory/regulatory authorities may include:

  • federal, state/territory and local authorities administering Acts, regulations and codes of practice

Tooling and equipment 

Tooling and equipment may include:

  • tooling and equipment to clean body exterior and door/boot cavities, including pressure cleaning equipment

Materials 

Materials may include:

  • cleaning and surface protection agents

Communications 

Communications are to include, but are not limited to:

  • verbal and visual instructions and fault reporting and may include worksite specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information /documents 

Sources of information/documents may include:

  • verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets (MSDS), diagrams or sketches
  • safe work procedures related to the washing/cleaning of vehicle bodies
  • regulatory/legislative requirements pertaining to automotive vehicle cleaning
  • engineer's design specifications and instructions
  • organisation work specifications and requirements
  • instructions issued by authorised enterprise or external persons
  • Australian standards

Unit Sector(s)

Unit sector 

Vehicle body

Co-requisite units

Co-requisite units 

Competency field

Competency field