Unit of competency
Modification History
Release |
Comment |
Release 1 |
New unit of competency. |
Application
This unit describes the performance outcomes required to remove and refit driveline components. It involves preparing for the task, testing, removing, refitting and adjusting driveline components, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The driveline systems include those of light vehicles, four wheel drive (4WD) vehicles, and light commercial vehicles.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Competency Field
Mechanical Miscellaneous
Unit Sector
Technical - Driveline and Final Drives
Elements and Performance Criteria
Elements Elements describe the essential outcomes. |
Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare to test and remove driveline components |
1.1 Job requirements are determined from workplace instructions 1.2 Driveline removal, refit and adjustment procedures and information are sourced and interpreted 1.3 Driveline testing procedures are sourced and interpreted from manufacturer specifications 1.4 Hazards associated with the work are identified and risks are managed 1.5 Tools and equipment are selected and checked for serviceability |
2. Test and remove driveline components |
2.1 Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements 2.2 Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 2.3 Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements 2.4 Results of driveline tests are reported according to workplace procedures |
3. Refit and adjust driveline components |
3.1 Driveline components are examined for serviceability prior to commencing the refitting procedures 3.2 Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements 3.3 Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements 3.4 Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures |
4. Complete work processes |
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 4.3 Tools and equipment are checked and stored according to workplace procedures 4.4 Workplace documentation is processed according to workplace procedures |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills |
Description |
Learning skills to: |
|
Reading skills to: |
|
Writing skills to: |
|
Oral communication skills to: |
|
Numeracy skills to: |
|
Technology skills to: |
|
Range of Conditions
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include: |
|
Unit Mapping Information
Equivalent to AURTTQ2002 Remove and refit driveline components
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1