Unit of competency details

Unit descriptor 

This unit covers the competence required to carry out the service and/or repair of clutch assemblies and associated components.

Application of the unit 

The unit includes identification and confirmation of work requirement, preparation for work, testing of clutch assemblies, analysis of results, repairs or service to clutch assemblies and completion of work finalisation processes, including clean-up and documentation.

This unit of competence applies to the following and should be contextualised to the qualification to which it is being applied:

• light vehicles or heavy vehicles or motorcycles or outdoor equipment or marine craft.

Work requires individuals to demonstrate discretion, judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

Prerequisite units 

Employability skills 

This unit contains employability skills.

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare to undertake servicing and repair of clutch assemblies

1.1. Nature and scope of work requirements are identified and confirmed

1.2. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work

1.3. Procedures and information such as workshop manuals and specifications, and tooling, are sourced

1.4. Method options are analysed and those most appropriate to the circumstances are selected and prepared

1.5. Technical and/or adjustment requirements for inspection, servicing and repair of clutch assemblies are sourced and support equipment is identified and prepared

1.6. Warnings in relation to working with clutch assemblies are observed

2. Test clutch and assembly systems

2.1. Methods for system tests are implemented in accordance with workplace procedures and manufacturer/component supplier specifications

2.2. Results are compared with manufacturer/component supplier specifications to indicate compliance or non-compliance

2.3. Results are documented with evidence and supporting information and recommendation(s) made

2.4. Report is forwarded to persons for action in accordance with workplace procedures

3. Carry out service and/or repair

3.1. Methods for service and/or repair are implemented in accordance with workplace procedures and manufacturer/ component supplier specifications

3.2. Adjustments made during the service are in accordance with manufacturer/component supplier specifications

4. Prepare vehicle/equipment for use or storage

4.1. Service schedule documentation is completed

4.2. Final inspection is made to ensure protective guards, safety features and cowlings are in place

4.3. Final inspection is made to ensure work is to workplace expectations

4.4. Vehicle/equipment is cleaned for use or storage to workplace expectations

4.5. Job card is processed in accordance with workplace procedures

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

• apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures
• apply analytical skills for identification and analysis of technical information
• apply plain English literacy and communication skills in relation to dealing with customers and team members
• apply questioning and active listening skills for example when obtaining information from customers
• apply oral communication skills sufficient to convey information and concepts to customers
• apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance
• interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal
• use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks
• establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage
• use workplace technology related to the service and/or repair of clutch assemblies and associated components, including the use of measuring equipment, computerised technology and communication devices and the documenting/recording of results

Required knowledge 

A working knowledge of:

• OH&S regulations/requirements, equipment, material and personal safety requirements
• dangers of working with wheeled and track equipment
• the identification of application, purpose and operation
• identification of component parts to include physical, fluid, gases and heat generation
• types and layout of service/repair manuals (hard copy and electronic)
• clutch testing procedures
• clutch servicing procedures
• clutch repair procedures
• work organisation and planning processes

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

• observing safety procedures and requirements
• communicating effectively with others involved in or affected by the work
• selecting methods and techniques, appropriate to the circumstances
• completing preparatory activity in a systematic manner
• identification of application, purpose and operating principles
• conducting inspection, servicing and operational testing in accordance with workplace and manufacturer/ component supplier specifications
• application of full repair sequence as per the Range Statement to a clutch assembly relative to the qualification being sought
• interpreting test results
• completing service and repair of the clutch assembly and associated components within workplace timeframes
• vehicle/equipment presentation to customer in compliance with workplace requirements

Context of , and specific resources for assessment 

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

• workplace location or simulated workplace
• material relevant to the service and/or repair of clutch assemblies and associated components
• equipment, hand and power tooling appropriate to the service and/or repair of clutch assemblies and associated components
• activities covering mandatory task requirements
• specifications and work instructions

Method of assessment 

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment 

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Servicing 

Servicing to include lubrication, adjustments and operational tests, visual inspection and records

Specific requirements 

Specific requirements may include:

• clutch assemblies, including single or multi-plate, wet and dry construction, standard and heavy duty types
• actuating mechanisms, including mechanical, hydraulic and pneumatic assisted

Variables 

Other variables may include:

• centrifugal, semi-centrifugal, dog, one-way, cone, over centre, slip, and two-stage construction
• steering clutches

Repair methods and sequence 

Repair methods and sequence are to include isolation of fault(s), dismantling, inspection and evaluation, replacement of components parts, assembly and completion of operational tests and records

Faults 

Faults to include:

• slipping clutch
• clutch not fully releasing

OH &S 

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment 

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures 

Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures 

Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements 

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements 

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory /regulatory authorities 

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment 

Tooling and equipment may include hand tooling, meters, gauges and load testing devices

Materials 

Materials may include lubricants, spare parts and cleaning materials

Communications 

Communications are to include but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information /documents 

Sources of information/documents may include:

• verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches
• safe work procedures related to the service and/or repair of clutch assemblies and associated components
• regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules
• engineer's design specifications and instructions
• organisation work specifications and requirements
• Instructions issued by authorised enterprise or external persons
• Australian Standards

Unit sector 

Technical

Co-requisite units 

Competency field