Unit of competency details

AURT304366A - Repair CNG fuel systems (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 21/Jun/2011

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by AURTTL3002 - Diagnose and repair CNG fuel systems 16/Jan/2013

Training packages that include this unit

Qualifications that include this unit

CodeTitleSort Table listing Qualifications that include this unit by the Title columnRelease
AUR40208 - Certificate IV in Automotive TechnologyCertificate IV in Automotive Technology 1-2 
AUR30705 - Certificate III in Outdoor Power EquipmentCertificate III in Outdoor Power Equipment 
AUR30611 - Certificate III in Automotive SpecialistCertificate III in Automotive Specialist 
AUR30605 - Certificate III in Automotive SpecialistCertificate III in Automotive Specialist 
AUR30505 - Certificate III in MarineCertificate III in Marine 
AUR30405 - Certificate III in Automotive Mechanical TechnologyCertificate III in Automotive Mechanical Technology 1-2 
AUR30308 - Certificate III in Automotive Electrical TechnologyCertificate III in Automotive Electrical Technology 1-2 
AUR20805 - Certificate II in Outdoor Power EquipmentCertificate II in Outdoor Power Equipment 
AUR20705 - Certificate II in Automotive MechanicalCertificate II in Automotive Mechanical 1-2 
AUR20605 - Certificate II in MarineCertificate II in Marine 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 11

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030503 Vehicle Mechanics  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030503 Vehicle Mechanics  18/Nov/2005 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit covers the competence required to carry out the repair of CNG fuel systems.

Application of the Unit

Application of the unit 

The unit includes identification and confirmation of work requirement, preparation for work, repair of CNG fuel systems and completion of work finalisation processes, including clean-up and documentation.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare to undertake repair of CNG fuel systems

1.1. Nature and scope of work requirements are identified and confirmed

1.2. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work

1.3. Procedures and information such as workshop manuals and specifications, and tooling, are sourced

1.4. Method options are analysed and those most appropriate to the circumstances are selected and prepared

1.5. Technical and/or calibration requirements for repair of the gas system are sourced and support equipment is identified and prepared

1.6. Warnings in relation to working with CNG fuel systems are observed

2. Carry out repair

2.1. Methods for repair are implemented in accordance with workplace procedures and manufacturer/component supplier specifications

2.2. Adjustments made during the repair are in accordance with manufacturer/component supplier specifications

3. Prepare vehicle for use or storage

3.1. Repair documentation is completed

3.2. Final inspection is made to ensure safety features are in place

3.3. Final inspection is made to ensure work is to workplace expectations

3.4. Vehicle is cleaned for use or storage to workplace expectations

3.5. Job card is processed in accordance with workplace procedures

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

  • apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures
  • apply analytical skills for identification and analysis of technical information
  • apply plain English literacy and communication skills in relation to dealing with customers and team members
  • apply questioning and active listening skills for example when obtaining information from customers
  • apply oral communication skills sufficient to convey information and concepts to customers
  • apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance
  • interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal
  • establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage
  • use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks
  • use workplace technology related to repairing CNG fuel systems, including the use of specialist tooling, measuring equipment, computerised technology and communication devices and the documenting/recording of results

Required knowledge 

A working knowledge of:

  • OH&S and environmental regulations/requirements, equipment, material and personal safety requirements
  • dangers of working with gas fuel systems
  • operating principles of CNG fuel systems
  • gas system components
  • repair procedures
  • test procedures
  • enterprise quality procedures
  • work organisation and planning processes

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

  • observing safety procedures and requirements
  • communicating effectively with others involved in or affected by the work
  • selecting methods and techniques appropriate to the circumstances
  • completing preparatory activity in a systematic manner
  • conducting repair in accordance with workplace and manufacturer/component supplier requirements
  • quality assuring repair results
  • repairing the CNG fuel system and associated components within workplace timeframes
  • vehicle presentation to customer in compliance with workplace requirements

Context of , and specific resources for assessment 

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian and Gas Industry Standards

The following resources should be made available:

  • workplace location or simulated workplace
  • material relevant to repairing CNG fuel systems
  • equipment, hand and power tooling appropriate to repairing CNG fuel systems
  • activities covering mandatory task requirements
  • specifications and work instructions

Method of assessment 

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Faults 

Faults to be diagnosed may include poor engine performance, abnormal consumption and gas fuel leaks

OH &

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment 

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures 

Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures 

Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements 

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements 

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory /regulatory authorities 

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment 

Tooling and equipment may include hand tooling, meters, gauges, load testing and gas leak testing devices

Materials 

Materials may include repair kits, spare parts, gas, sealants, adhesives and cleaning materials

Communications 

Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information /documents 

Sources of information/documents may include:

  • verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches
  • safe work procedures related to the repair of CNG fuel systems
  • regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules and gas industry standards
  • engineer's design specifications and instructions
  • organisation work specifications and requirements
  • instructions issued by authorised enterprise or external persons
  • Australian Standards

Unit Sector(s)

Unit sector 

Technical

Co-requisite units

Co-requisite units 

Competency field

Competency field 

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.