^

 
 

Unit of competency details

AURT301359A - Reclaim engine components (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by AURTTM3010 - Heat treat, straighten and reclaim engine components19/Dec/2011

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 21/Jun/2011

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnRelease
AUR20805 - Certificate II in Outdoor Power EquipmentCertificate II in Outdoor Power Equipment
AUR30911 - Certificate III in MotorsportCertificate III in Motorsport
AUR20811 - Certificate II in Outdoor Power EquipmentCertificate II in Outdoor Power Equipment
AUR30711 - Certificate III in Outdoor Power EquipmentCertificate III in Outdoor Power Equipment
AUR30705 - Certificate III in Outdoor Power EquipmentCertificate III in Outdoor Power Equipment
AUR21005 - Certificate II in MotorsportCertificate II in Motorsport
AUR20505 - Certificate II in Automotive Vehicle ServicingCertificate II in Automotive Vehicle Servicing
AUR40208 - Certificate IV in Automotive TechnologyCertificate IV in Automotive Technology
AUR30605 - Certificate III in Automotive SpecialistCertificate III in Automotive Specialist
AUR20605 - Certificate II in MarineCertificate II in Marine
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 15

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030503 Vehicle Mechanics  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030503 Vehicle Mechanics  25/Mar/2009 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit covers the competence required to use various industry accepted methods to reclaim engine components as part of the engine reconditioning process.

Application of the Unit

Application of the unit 

The unit includes identification and confirmation of work requirement, preparation for work, reclamation of components through heat treatment and straightening techniques and completion of work finalisation processes, including clean-up and documentation.

This unit of competence applies to engine reconditioning.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare to undertake engine reclaiming procedures

1.1. Nature and scope of work requirements are identified and confirmed

1.2. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work

1.3. Procedures and information such as workshop manuals and specifications, and tooling, are sourced

1.4. Method options are analysed and those most appropriate to the circumstances are selected and prepared

1.5. Technical and/or calibration requirements for heat treatment are sourced and support equipment is identified and prepared

2. Heat treat engine components for reclaim

2.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications

2.2. Heat treating methods are used to repair damaged/ undersized component(s)

2.3. Heat treat is completed without causing damage to any component or system

2.4. Heat treating process is completed within industry guidelines

2.5. Heat treating operations are carried out according to OH&S legislation, legislation and enterprise procedures/ policies

3. Straighten engine components for reclaim

3.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications

3.2. Straightening equipment is accessed

3.3. Components are mounted and clamped in straightening equipment

3.4. Straightening methods are applied to engine components

3.5. Engine components are straightened using acceptable reconditioning methods, to comply with Australian Standards

3.6. Work is completed without causing damage to any component or system

3.7. Components are measured against manufacturer/ component supplier specifications and allowable tolerances

3.8. Straightening operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies

4. Finish components in readiness for assembly

4.1. Components are machined and finished to specifications

4.2. Surfaces are protected with a rust prevention solution

4.3. Components are stored to workplace requirements

4.4. Job card is processed in accordance with workplace procedures

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

  • apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures
  • apply analytical skills for identification and analysis of technical information
  • apply plain English literacy and communication skills in relation to dealing with customers and team members
  • apply questioning and active listening skills for example when obtaining information from customers
  • apply oral communication skills sufficient to convey information and concepts to customers
  • apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance
  • interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal
  • establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage
  • use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks
  • use workplace technology related to reclaiming engine components, including the use of specialist reclaim tooling and equipment, measuring equipment, computerised technology and communication devices and the documenting/recording of results

Required knowledge 

A working knowledge of:

  • OH&S regulations/requirements, equipment, material and personal safety requirements
  • types, characteristics, uses and limitations of reclaim techniques
  • dangers of working with heating equipment
  • effects of heat on different metals and heating procedures
  • component straightening techniques
  • hardening and tempering techniques
  • enterprise quality procedures
  • work organisation and planning processes

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

  • observing safety procedures and requirements
  • communicating effectively with others involved in or affected by the work
  • selecting methods and techniques appropriate to the circumstances
  • completing preparatory activity in a systematic manner
  • conducting application of heating and straightening in accordance with workplace requirements
  • completing work to manufacturer/component supplier requirements
  • straightening components without damage to tooling and equipment or injury to persons
  • reclaiming components without damage to tooling and equipment or injury to persons
  • machining reclaimed components to tolerances following enterprise procedures

Context of , and specific resources for assessment 

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

  • workplace location or simulated workplace
  • material relevant to reclaiming engine components
  • equipment, hand and power tooling appropriate to reclaiming engine components
  • activities covering mandatory task requirements
  • specifications and work instructions

Method of assessment 

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Reclaim methods 

Reclaim methods are to include hardening and tempering, straightening components, machining components, measuring and comparing to specifications

Engine components 

Engine components are to include cylinder heads (alloy and cast iron), piston and connecting rod assemblies, crankshafts and camshafts

OH &

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment 

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures 

Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures 

Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements 

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements 

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory /regulatory authorities 

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment 

Tooling and equipment are to include hand tooling, power tooling, lifting equipment, measuring equipment, hydraulic press, heat equipment, heat ovens, reclaiming machines, surface finishers and hardness testers

Materials 

Materials may include consumables and cleaning materials

Communications 

Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information /documents 

Sources of information/documents may include:

  • verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches
  • safe work procedures related to reclaiming engine components
  • regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules
  • engineer's design specifications and instructions
  • organisation work specifications and requirements
  • instructions issued by authorised enterprise or external persons
  • Australian Standards

Unit Sector(s)

Unit sector 

Technical

Co-requisite units

Co-requisite units 

Competency field

Competency field