Unit of competency details

AURT225191A - Produce drawings from design concepts (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 21/Jun/2011

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to AURATA2003 - Produce drawings from design concepts 16/Jan/2013

Training packages that include this unit

Qualifications that include this unit

CodeTitleSort Table listing Qualifications that include this unit by the Title columnRelease
AUR31105 - Certificate III in Automotive Warehousing/Distribution OperationsCertificate III in Automotive Warehousing/Distribution Operations 1-2 
AUR30911 - Certificate III in MotorsportCertificate III in Motorsport 1-2 
AUR30905 - Certificate III in MotorsportCertificate III in Motorsport 
AUR30705 - Certificate III in Outdoor Power EquipmentCertificate III in Outdoor Power Equipment 
AUR30611 - Certificate III in Automotive SpecialistCertificate III in Automotive Specialist 
AUR30605 - Certificate III in Automotive SpecialistCertificate III in Automotive Specialist 
AUR30505 - Certificate III in MarineCertificate III in Marine 
AUR30405 - Certificate III in Automotive Mechanical TechnologyCertificate III in Automotive Mechanical Technology 1-2 
AUR30308 - Certificate III in Automotive Electrical TechnologyCertificate III in Automotive Electrical Technology 1-2 
AUR21011 - Certificate II in MotorsportCertificate II in Motorsport 1-2 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 16

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030501 Automotive Engineering  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030501 Automotive Engineering  18/Nov/2005 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit covers the competence to produce drawings of objects from design concepts.

Application of the Unit

Application of the unit 

Drawings are to include assembly type components which are hand drawn and may include computer-aided drawings.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Identify object to be drawn

1.1. Purpose (and operational characteristics) of object to be drawn are identified

1.2. Production materials and method are identified

2. Establish design requirements and limitations

2.1. Type of drawing to be completed is identified

2.2. Design concept requirements are established and documented identifying dimensions, angles, shapes and finished size

2.3. Drawing conventions and specifications to be noted are identified and selected

3. Quantify and draft initial drawing

3.1. Dimensions are plotted from prototype sketch and documented specifications

3.2. Dimensional points are connected to match drawing view

3.3. Production notes or special requirements are noted

3.4. Drawing conventions and specifications are noted

4. Complete drawing

4.1. Angles, shapes and dimensions are checked against specifications and concept prototype drawing

4.2. Adjustments are made to the drawing within scope of authority

4.3. Drawing is checked for compliance with workplace documentation requirements

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

  • collect, organise and understand information
  • research and interpretive skills to locate, interpret and apply drawing production techniques and procedures
  • English literacy and communication skills in relation to dealing with others involved in design work
  • questioning and active listening skills, for example when obtaining information of technical quality working practices and drawing production procedures
  • apply planning and organising skills to one's own work activities, including making good use of time and resources, sorting out priorities and monitoring one's own performance
  • interact effectively with other people both on a one-to-one basis and in groups, including understanding and responding to the needs of a client and working effectively as a member of a team to achieve a shared goal
  • establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage
  • use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks
  • use workplace technology related to the production of drawings, including the use of measuring equipment and communication devices and the reporting/documenting of results

Required knowledge 

A working knowledge of:

  • OH&S regulations/requirements, equipment, material and personal safety requirements
  • common automotive terminology and vehicle safety requirements
  • design and techniques for translating concepts into form
  • design standards, including Australian Design Rules
  • technical drawing procedures
  • detailed site reporting procedures
  • work organisation and planning processes
  • enterprise quality processes

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

  • observing safety procedures and requirements
  • communicating effectively with others involved in or affected by the work
  • selecting methods and techniques appropriate to the circumstances
  • completing preparatory activity in a systematic manner
  • interpreting specifications and measurements in two and three dimensional form
  • presenting information within production drawings
  • completing essential post-activity housekeeping

Context of , and specific resources for assessment 

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

  • workplace location or simulated workplace
  • material relevant to the production of drawings
  • equipment, hand and power tooling appropriate to the production of drawings
  • activities covering mandatory task requirements
  • specifications and work instructions

Method of assessment 

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OH &

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, workplace environment and safety and enterprise first aid

Personal protective equipment 

Personal protective equipment is to include that prescribed under legislation/regulations/codes of practice and workplace policies and practices

Safe operating procedures 

Safe operating procedures are to include, but are not limited to the conduct of operational risk assessment and treatments associated with site safety, working in proximity to others and site visitors

Emergency procedures 

Emergency procedures related to this unit are to include, but are not limited to enterprise first aid requirements and site evacuation

Environmental requirements 

Environmental requirements are to include but are not limited to waste management and clean-up management

Quality requirements 

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory /regulatory authorities 

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Resources 

Resources are to include drawing equipment/aids which are manual and electronically based

Communications 

Communications are to include, but are not limited to verbal and visual instructions and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information /documents 

Sources of information/documents may include:

  • schedules/plans/specifications, memos, material safety data sheets, diagrams or sketches
  • regulatory/legislative requirements pertaining to the automotive industry, including Australian Design Rules
  • organisation work specifications and requirements
  • instructions issued by authorised enterprise or external persons
  • Australian Standards

Unit Sector(s)

Unit sector 

Technical

Co-requisite units

Co-requisite units 

Competency field

Competency field 

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.