Unit of competency details

AURETX001 - Analyse and evaluate electrical and electronic faults in driveline management systems (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 14/Apr/2016

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to AURETX5001 - Analyse and evaluate electrical and electronic faults in transmission and driveline systems 13/Apr/2016


Training packages that include this unit

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030505 Automotive Electrics And Electronics  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030505 Automotive Electrics And Electronics  09/Aug/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Unit Of competency

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Application

This unit describes the performance outcomes required to analyse and evaluate electrical and electronic faults in the embedded network driveline management systems of vehicles or machinery in order to initiate action to sustain, vary or enhance performance. It involves identifying, evaluating, selecting, justifying and documenting the most appropriate rectification method or variation to the rectification method. The unit includes the analysis of multi-system and intermittent faults which may be caused by operating in adverse conditions.

It applies to those working in the automotive service and repair industry on embedded network driveline management systems of vehicles or machinery.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Competency Field

Electrical

Unit Sector

Technical - Transmission

Elements and Performance Criteria

Elements 

Elements describe the essential outcomes.

Performance Criteria 

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Identify and confirm the work requirement

1.1 Objective of the analysis and evaluation is determined from workplace instructions

1.2 Specifications for driveline management system are sourced and interpreted

1.3 System faults, deficiencies or discrepancies are identified and confirmed

1.4 Hazards associated with the work are identified and risks are managed according to workplace procedures and safety requirements 

2. Prepare for analysis and evaluation

2.1 Evaluation criteria are developed or adopted to meet the objective of the analysis and evaluation

2.2 Analytical and evaluative methodology  is developed or identified from technical information

2.3 Testing equipment is prepared according to manufacturer specifications and workplace procedures

2.4 Tools and materials required to support the diagnostic procedure are identified, selected and prepared for use

2.5 Driveline management system and components are prepared for the diagnostic process

3. Carry out failure analysis

3.1 Selected analytical and evaluative methodology is followed according to manufacturer specifications and workplace procedures

3.2 Tests are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.3 Analytical and other diagnostic findings are verified, as required, by using reliable alternative or optional processes

3.4 Analytical findings and results are assessed against evaluation criteria

3.5 Valid conclusions are drawn from available evidence and documented according to workplace requirements

4. Make recommendations

4.1 Options for responding to the objective are determined from further research of technical support information

4.2 Rectification method is selected from an analysis of the options, operating conditions, regulatory requirements, Australian Design Rules, and financial implications

4.3 Report is prepared specifying analysis and evaluation process, and detailing and justifying rectification method or variation to the rectification method

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

5.3 Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.

Skills 

Description 

Learning skills to:

  • apply learning and processes to different situations.

Reading skills to:

  • research, organise and interpret technical information relating to driveline management systems.

Writing skills to:

  • legibly and accurately fill out workplace documentation when reporting failure analysis findings
  • document and complete reports.

Numeracy skills to:

  • use mathematical ideas and techniques to complete measurements, calibrate testing equipment and present analytical results.

Planning and organising skills to:

  • plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes.

Technology skills to:

  • use specialised driveline management system diagnostic equipment.

Range of Conditions

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements  must include:

  • work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
  • identifying hazards and controlling risks associated with wearing jewellery while working around high current wiring systems
  • working with high pressure fluid.

Analytical and evaluative methodology  must include:

  • diagnostic process, sequence, tests and testing equipment.

Unit Mapping Information

Equivalent to AURETX5001 Analyse and evaluate electrical and electronic faults in transmission and driveline systems

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

 

Assessment requirements

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit s elements, performance criteria, range of conditions and foundation skills:

  • analyse and evaluate an electrical or electronic fault in the driveline management systems of two different vehicles or machinery
  • the above faults must involve the following systems:
  • transmission
  • driveline.

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

  • work health and safety (WHS) and occupational health and safety (OHS) requirements relating to analysing and evaluating faults in driveline management systems, including procedures for:
  • identifying hazards and controlling risks associated with wearing jewellery while working around high current wiring systems
  • working with high pressure fluid
  • principles and processes involved in planning and implementing analysis and evaluation of electrical and electronic faults in driveline management systems
  • design and planning of diagnostic procedures for faults in driveline management systems, including procedures for diagnosing:
  • electrical faults
  • electronic faults
  • types, functions, operation and limitations of driveline management systems, including:
  • driveline management systems, including:
  • clutches
  • torque converters
  • manual transmissions
  • automatic transmissions
  • drive and power take-off shafts
  • differentials
  • drivelines
  • gateway network control module:
  • bus network topography
  • associated network electronic vehicle or machinery systems
  • sensor and actuator control and monitoring systems
  • control signal circuits
  • testing procedures for driveline management systems, including the use of:
  • digital multimeter
  • scan tool
  • oscilloscope
  • four-wheel dynamometer
  • types, functions, operation and limitations of diagnostic testing equipment required to analyse and evaluate electrical and electronic faults in driveline management systems
  • procedures for accessing and interpreting scan tool system data, including:
  • diagnostic trouble codes (DTCs), including:
  • conditions that set the DTCs
  • conditions for running DTCs
  • live data
  • freeze frame data
  • waveforms
  • procedures for documenting and reporting the analysis and evaluation process
  • requirements of Australian Design Rules (ADRs) relating to driveline management systems.

Assessment Conditions

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the driveline management systems that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

  • automotive repair workplace or simulated workplace
  • workplace instructions
  • manufacturer driveline management system specifications
  • two different vehicles or machinery with driveline management system faults
  • diagnostic equipment for driveline management systems
  • tools, equipment and materials appropriate for analysing and evaluating driveline management systems.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.