Modification History
Release |
Comment |
Release 1 |
Replaces AURE321371A Service and repair electronic body management systems Unit code updated to meet policy requirements Reference to OHS legislation replaced with new WHS legislation Licensing statement added to unit descriptor |
Unit Descriptor
Unit descriptor |
This unit covers the competence to service/repair electronic body management systems and/or associated components which include engine immobilisation, central locking, power windows, electric mirrors, electronic seat adjustment with memory and security systems. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority. |
Application of the Unit
Application of the unit |
The unit includes identification and confirmation of work requirement, preparation for work, testing and diagnosis of faults, servicing, repair and retesting of systems and completion of work finalisation processes, including clean-up and documentation. Work requires individuals to demonstrate some judgement and problem-solving skills in managing own work activities and contributing to a productive team environment. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Not applicable.
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge and/or the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for work |
1.1. Work instructions are used to determine job requirements, including quality, material, equipment quantities and service manuals 1.2. Job specifications are read and interpreted 1.3.WHS requirements, including personal protection needs, are observed throughout the work 1.4. Electronic system protection devices, processes and precautions are identified appropriate to the application 1.5. Equipment and tooling are identified and checked for safety and correct operation 1.6. Procedures are identified to minimise task time |
2. Test control system, diagnose faults and determine service/repair requirements |
2.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications 2.2. Tests are carried out according to manufacturer/component supplier recommended procedures using tooling, equipment and techniques 2.3. Testing is completed without causing damage to component or system 2.4. Test results are used to diagnose system/component faults 2.5. Service/repair requirements are determined 2.6. Testing is carried out according to industry regulations/ guidelines WHS and enterprise/procedures policies |
3. Service/repair body management systems |
3.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications 3.2. Service/repair requirements are carried out according to manufacturer/component supplier recommended specifications and procedures 3.3. Service/repair is completed without causing damage to component or system 3.4. Electronic systems are tested and results are documented in accordance with workplace policies and procedures 3.5. Service, repair and retesting are carried out according to industry regulations/guidelines, WHS and enterprise/ procedures policies 3.6. Workplace and equipment documents are completed in accordance with site requirements |
4. Clean up work area and maintain equipment |
4.1. Material that can be reused is collected and stored 4.2. Waste and scrap are removed following workplace procedures 4.3. Equipment and work area are cleaned and inspected for serviceable conditions in accordance with workplace procedures 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures 4.5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures 4.6. Tooling is maintained in accordance with workplace procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
A working knowledge of:
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:
|
Context of , and specific resources for assessment |
Application of competence is to be assessed in the workplace or simulated worksite. Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints. Assessment is to comply with regulatory requirements, including Australian Standards. The following resources should be made available:
|
Method of assessment |
|
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Electronic body management systems |
Electronic body management systems may control the following functions:
|
Fittings |
Electronic body management systems include those fitted to light vehicles and/or heavy commercial vehicles and/or plant and equipment and/or outdoor power equipment |
Functions |
Electronic body management may control the following functions:
|
Service and repair methods |
Service and repair methods include:
|
Faults |
Faults may include:
|
Critical precautions |
Critical precautions, including manufacturer/component supplier procedures, must be applied as poor working practices are likely to damage electronic system ECUs and/or other components |
WHS requirements |
WHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures, and may include:
|
Personal protective equipment |
Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices |
Safe operating procedures |
Safe operating procedures are to include, but are not limited to:
|
Emergency procedures |
Emergency procedures related to this unit are to include, but may not be limited to:
|
Environmental requirements |
Environmental requirements are to include, but are not limited to:
|
Quality requirements |
Quality requirements are to include, but are not limited to:
|
Statutory /regulatory authorities |
Statutory/regulatory authorities may include:
|
Tooling and equipment |
Tooling and equipment may include:
|
Materials |
Materials may include:
|
Communications |
Communications are to include, but are not limited to:
|
Information /documents |
Sources of information/documents may include:
|
Unit Sector(s)
Unit sector |
Electrical |
Co-requisite units
Not applicable.
Competency field
Competency field |
Technical - Electrical and Electronic |