^

 
 

Unit of competency details

AURETR3024 - Diagnose and repair electronic compression ignition engine management systems (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes AURE321771A - Service and repair electronic compression ignition engine management systems 16/Jan/2013
Is superseded by and equivalent to AURETR024 - Diagnose and repair compression ignition engine management systems 13/Apr/2016

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 17/Jan/2013

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnRelease
AUR31712 - Certificate III in Forklift TechnologyCertificate III in Forklift Technology
AUR30912 - Certificate III in Motorsport TechnologyCertificate III in Motorsport Technology1-2 
AUR30514 - Certificate III in Marine Mechanical TechnologyCertificate III in Marine Mechanical Technology
AUR31114 - Certificate III in Heavy Commercial Vehicle Mechanical TechnologyCertificate III in Heavy Commercial Vehicle Mechanical Technology
AUR31212 - Certificate III in Mobile Plant TechnologyCertificate III in Mobile Plant Technology
AUR31512 - Certificate III in Automotive Diesel Engine TechnologyCertificate III in Automotive Diesel Engine Technology
AUR30312 - Certificate III in Automotive Electrical TechnologyCertificate III in Automotive Electrical Technology
AUR30612 - Certificate III in Light Vehicle Mechanical TechnologyCertificate III in Light Vehicle Mechanical Technology
AUR30412 - Certificate III in Agricultural Mechanical TechnologyCertificate III in Agricultural Mechanical Technology
AUR30512 - Certificate III in Marine Mechanical TechnologyCertificate III in Marine Mechanical Technology
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 13

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030505 Automotive Electrics And Electronics  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030505 Automotive Electrics And Electronics  07/Aug/2013 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 

Comment 

Release 1 

Replaces AURE321771A Service and repair electronic compression ignition engine management systems

Performance Criteria and Range Statement updated to reflect technologies

Unit Descriptor

Unit descriptor 

This unit describes the performance outcomes required to diagnose and repair electronic compression ignition engine management systems.

The unit involves diagnosing deviations from correct operation, repairing electronic compression ignition engine management system components and associated systems, and undertaking post-repair testing procedures.

The unit also involves identifying and confirming work requirements, preparing for work, testing systems, identifying faults and potential causes, repairing and retesting electronic compression ignition engine management systems, and completing work finalisation processes, including clean-up and documentation.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Application of the Unit

Application of the unit 

Work applies to diesel fuelled vehicles and equipment in light and heavy vehicle, mining, construction, agricultural, motorcycle, outdoor power equipment and marine environments.

Engine management systems are systems where the electronic control unit (ECU) incorporates control over fuel injection, ignition timing control and all other systems relating to engine performance and emissions.

Work requires individuals to demonstrate some judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Licensing/Regulatory Information

Not applicable.

Pre-Requisites

Not applicable.

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge and/or the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare to diagnose and repair electronic compression ignition engine management systems

1.1. Workplace instructions  are used to determine job requirements 

1.2. Workplace health and safety (WHS) requirements  are observed throughout the work

1.3. Procedures and information  are sourced and interpreted

1.4. Options for diagnosing faults  are identified and used, using appropriate tools and diagnostic techniques

1.5. Tools and equipment  are identified for effective repair methods

2. Diagnose electronic compression ignition engine management systems

2.1. Electronic compression ignition engine management systems  are tested to isolate faults according to workplace procedures and without causing damage to components or systems as a result of inappropriate testing procedures 

2.2. Faults  are identified from test results and causes of faults are determined

2.3. Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair electronic compression ignition engine management systems

3.1. Repair options  are analysed and those most appropriate to the circumstances are selected

3.2. Appropriate tools, techniques and materials are selected and prepared

3.3. Repairs and component replacements and adjustments are carried out without causing damage, according to workplace procedures and manufacturer and component supplier specifications

3.4. Post-repair testing  is carried out according to workplace procedures and relevant legislation

4. Prepare vehicle and equipment for delivery to customer after repair is completed

4.1. Final inspection is made to ensure work is to workplace expectations

4.2. Vehicle is cleaned to workplace expectations and presented ready for use

4.3. Workplace documentation is processed according to workplace procedures

5. Clean up work area and finalise work processes

5.1. Material that can be reused is collected and stored according to workplace sustainability practices

5.2. Waste and scrap are removed according to workplace practices

5.3. Tools, equipment and work area are cleaned and inspected according to workplace procedures

5.4. Tools and equipment are maintained according to workplace procedures

5.5. Faulty equipment is identified, tagged and isolated according to workplace procedures

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

  • communication skills to:
  • follow verbal and written instructions
  • clarify workplace instructions and determine job requirements
  • gain information from appropriate persons and assistance as required
  • initiative and enterprise skills to:
  • apply learning when diagnosing and repairing various electronic compression ignition engine management systems
  • recognise a workplace problem or potential problem and take action
  • learning skills to identify sources of information, assistance and expert knowledge to expand skills, knowledge and understanding
  • literacy skills to:
  • read and follow information in written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents
  • obtain and record measurements
  • document required repairs and parts
  • numeracy skills to:
  • test, measure and analyse test equipment results compared to desired system performance
  • assess tolerances and apply accurate measurements and adjustments
  • planning and organising skills to:
  • plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed on time
  • identify risk factors and take action to minimise them
  • problem-solving skills to:
  • determine the underlying causes of faults
  • refer problems outside area of responsibility to appropriate person and suggest possible causes
  • seek information and assistance as required to solve problems
  • self-management skills to:
  • select and use appropriate equipment, materials, processes and procedures
  • recognise limitations and seek timely advice
  • follow workplace documentation, such as codes of practice and operating procedures
  • teamwork skills to apply knowledge of own role to complete activities efficiently to support team activities and tasks
  • technical skills to use hand, power, measuring and specialised tools relating to the repair of electronic compression ignition engine management systems
  • technology skills to:
  • operate diagnostic and test equipment
  • use technology to collect, analyse and provide information

Required knowledge 

  • WHS regulations, requirements, equipment, material and personal safety requirements relating to diagnosing and repairing electronic compression ignition engine management systems, including:
  • individual state and territory legislation
  • codes of practice
  • personal protection needs
  • dangers of working with high-pressure diesel fuel systems
  • principal types of vehicle electronic compression ignition engine management systems, including:
  • direct injection, including:
  • electronic unit injectors (EUI)
  • hydraulic electronic unit injectors (HEUI)
  • indirect injection
  • common rail systems, including:
  • common rail solenoid
  • piezo design
  • amplified systems
  • application, purpose and operation of electronic compression ignition engine management systems, including:
  • common rail fuel control system
  • fuel injectors, types and designs
  • glow plugs
  • exhaust gas recirculation (EGR) and positive crankcase ventilation (PCV) system
  • diesel particulate diffuser (DPD) exhaust after-treatment system
  • turbo and super charger and intercooler systems
  • fuel filter, coolers and water trap
  • techniques for reading and interpreting technical information, graphic symbols and diagrams
  • diagnostic and testing procedures, including:
  • diagnostic procedures for electronic compression ignition engine management systems, including:
  • accessing and interpreting diagnostic trouble codes
  • diagnostic flow charts
  • analysis of system operation using electrical test equipment, scan tools, oscilloscopes and other industry-relevant test equipment
  • visual, aural and functional assessments, including:
  • component damage and wear
  • component corrosion
  • repair procedures, including:
  • component removal and replacement procedures
  • component and associated system adjustment and recalibration procedures

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

  • observe safety procedures and requirements
  • demonstrate safe work procedures relating to working with high fuel pressure and high injector voltages on diesel engines
  • select methods and techniques appropriate to the circumstances
  • complete preparatory activity in a systematic manner
  • diagnose and repair a range of electronic compression ignition engine management systems
  • conduct diagnosis and repair procedures according to workplace, manufacturer and component supplier requirements
  • present vehicle and equipment in a condition that complies with workplace requirements.

Context of, and specific resources for assessment 

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

  • using standard workplace practices and procedures
  • following safety requirements
  • applying environmental constraints.

Assessment is to comply with relevant:

  • regulatory requirements
  • Australian standards
  • industry codes of practice.

The following resources must be made available for the assessment of this unit:

  • workplace location or simulated workplace
  • vehicles with electronic compression ignition engine management faults relevant to the qualification being sought
  • equipment appropriate for the testing of vehicle electronic compression ignition engine management systems
  • specifications and workplace instructions
  • tools appropriate for repairing, replacing and adjusting vehicle electronic compression ignition engine management systems.

Method of assessment 

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace instructions  may include:

  • electronic or hard copy instructions
  • verbal instructions
  • written instructions.

Job requirements  may include:

  • diagnosis and repair methods, processes and equipment.

Workplace health and safety requirements  may include:

  • personal protective clothing and equipment
  • hazards associated with high pressure fuel systems
  • hazards associated with high injector voltage circuits
  • safe use of tools and equipment
  • safe handling of material
  • use of fire-fighting equipment
  • workplace safety policies and procedures
  • workplace first aid equipment
  • hazard control, including control of hazardous materials and toxic substances.

Procedures and information  may include:

  • verbal, written and graphical instructions
  • signage
  • work schedules, plans and specifications
  • work bulletins and memos
  • material safety data sheets
  • diagrams and sketches
  • safe work procedures relating to the repair and replacement of electronic compression ignition engine management systems
  • regulatory and legislative requirements relating to automotive industry
  • Australian Design Rules
  • engineer's design specifications and instructions
  • workplace work specifications and requirements
  • instructions issued by authorised workplace or external persons
  • Australian standards
  • vehicle service requirements and repair manuals.

Options for diagnosing faults  may include:

  • isolation of faults
  • component inspection and evaluation.

Tools and equipment  may include:

  • hand tools
  • testing equipment, including multimeters, ohmmeters, voltmeters and tachometers
  • insulation testers
  • power tools and air tools
  • fuel pressure and fuel flow gauges
  • engine analysers
  • dynamometers
  • oscilloscopes
  • diagnostic scan tools.

Electronic compression ignition engine management systems  may include:

  • direct injection:
  • electronic unit injectors
  • hydraulic electronic unit injectors
  • indirect injection
  • common rail systems, including:
  • solenoid
  • piezo electric
  • amplified systems.

Inappropriate testing procedures  may include:

  • intrusive testing (which must not be performed as it is not a recommended test and repair method), which includes:
  • back probing terminals and connectors and fuse holders with inappropriate test probes
  • probing terminal and connectors with inappropriate test probes
  • pushing sharp probes and objects into wiring insulation.

Faults  may include:

  • engine difficult to start or will not start
  • engine misfiring
  • poor engine performance
  • engine knock
  • overheating
  • black or white smoke from exhaust
  • PCV defective
  • diesel fuel contamination
  • blocked or restricted fuel injectors
  • DPD exhaust after treatment system defective or not serviced
  • diagnosis trouble codes (DTC) being set.

Repair options  may include:

  • pre- and post-repair testing
  • identifying and testing components
  • diagnosing and determining faults
  • component repair procedures, including:
  • removal, replacement and adjustment procedures
  • dismantle, repair, re-assembly and adjustment procedures
  • electrical measurements
  • fuel pressure testing involving visual and functional assessments, including for damage and wear.

Post-repair testing  may include:

  • validating effectiveness of the repair action
  • confirming that reported fault has been rectified
  • confirming that no other faults are present as a result of the repair action.

Unit Sector(s)

Competency field 

Electrical

Unit sector 

Technical – Electrical and Electronic

Custom Content Section

Not applicable.