Unit of competency details

Release 

Comment 

Release 1 

Replaces AURE219531A Install ancillary electrical components

Performance Criteria and Range Statement updated to reflect technologies

Unit descriptor 

This unit describes the performance outcomes required to install and test basic vehicle ancillary electrical components that do not require programming procedures to connect and interface them with the vehicle computer area network databus (CAN-bus) network.

The unit also involves identifying and confirming work requirements, preparing for work, and completing work finalisation processes, including clean-up and documentation.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Application of the unit 

Work applies to the installation and testing of basic ancillary electrical components that are fitted in light and heavy vehicle, mining, construction, agricultural, motorcycle, outdoor power equipment and marine environments.

Basic ancillary electrical components include driver interlocks; remote keyless entry and security alarm systems; audio systems; mobile phones; speed alert and navigation systems; reverse parking aids, including audible alerts and cameras; and driver gauges and instruments.

Work requires individuals to demonstrate some judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Employability skills 

This unit contains employability skills.

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge and/or the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Prepare for work

1.1. Workplace instructions  are used to determine job requirements 

1.2. Workplace health and safety (WHS) requirements  are observed throughout the work

1.3. Procedures and information  are sourced and interpreted

1.4. Installation options  are analysed and those most appropriate to the circumstances are selected and prepared

1.5. Tools and equipment  are identified for effective installation and testing procedures

2. Install and test fitted components

2.1. Basic ancillary electrical equipment  is installed and tested according to manufacturer and component supplier specifications without causing damage to components or systems as a result of inappropriate testing procedures 

2.2. Tests are carried out to identify faults using tools and diagnostic techniques

2.3. Preferred repair action  is determined and carried out

2.4. Post-repair testing is carried out according to workplace procedures

3. Prepare vehicle and equipment for delivery to customer after repair is completed

3.1. Final inspection is made to ensure work is to workplace expectations

3.2. Vehicle is cleaned to workplace expectations and presented ready for use

3.3. Workplace documentation is processed according to workplace procedures

4. Clean up work area and maintain equipment

4.1. Material that can be reused is collected and stored

4.2. Waste and scrap are removed following workplace procedures

4.3. Equipment and work area are cleaned and inspected for serviceable condition according to workplace procedures

4.4. Faulty equipment is identified, tagged and isolated according to workplace procedures

4.5. Operator maintenance is completed according to manufacturer and component supplier specifications and site procedures

4.6. Tools and equipment are maintained according to workplace procedure

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

• communication skills to:

• follow verbal and written instructions
• clarify workplace instructions and determine job requirements
• gain information from appropriate persons and assistance as required

• literacy skills to:

• read and follow information in written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents
• obtain and record measurements
• document required repairs and parts

• numeracy skills to:

• test, measure and analyse test equipment results compared to desired system performance
• assess tolerances and apply accurate measurements and adjustments

• planning and organising skills to:

• plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed on time
• identify risk factors and take action to minimise them

• problem-solving skills to:

• recognise a workplace problem or potential problem and take action
• seek information and assistance as required to solve problems

• self-management skills to:

• select and use appropriate equipment, materials, processes and procedures
• recognise limitations and seek timely advice
• follow workplace documentation, such as codes of practice and operating procedures

• teamwork skills to apply knowledge of own role to complete activities efficiently to support team activities and tasks
• technical skills to use workplace technology and tools relating to installing and testing basic ancillary electrical components in vehicles, including:

• specialist tools and equipment
• electrical measuring equipment

• technology skills to:

• operate a range of electrical diagnostic test equipment
• use technology to collect, analyse and provide information

Required knowledge 

• WHS regulations, requirements, equipment, material and personal safety requirements, including:

• codes of practice
• personal protection needs

• basic ancillary component and systems installation and testing procedures, including resistance and voltage drop and circuit performance checks
• correct cable types and sizes and current carrying capacity
• various types of wiring systems found in vehicles, including:

• basic wiring
• twisted pair
• shielded wiring
• CAN-bus networks

• techniques for reading and interpreting technical information, wiring diagrams and graphic symbols
• diagnostic and testing procedures, including:

• testing procedures for basic ancillary electrical installations, including:

• following manufacturer and component suppliers’ test procedures
• following original equipment manufacturer (OEM) service information

• analysis of system operation using basic electrical test equipment and other industry-relevant test equipment
• visual, aural and functional assessments, including:

• component damage and wear
• component corrosion
• water and moisture ingress

• repair procedures, including:

• component removal and replacement procedures
• component and associated system adjustment procedures

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

• observe safety procedures and requirements
• select methods and techniques appropriate to the circumstances
• complete preparatory activity in a systematic manner
• read and interpret vehicle wiring diagrams
• install basic ancillary electrical components to specification
• test basic ancillary electrical components to determine short, open, high resistance between power, signal and ground circuits
• test electrical wiring harnesses and looms and locate possible faults
• conduct installation according to workplace, manufacturer and component supplier requirements
• accurately interpret test results
• present vehicle and equipment in a condition that complies with workplace requirements.

Context of, and specific resources for assessment 

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

• using standard workplace practices and procedures
• following safety requirements
• applying environmental constraints.

Assessment is to comply with relevant:

• regulatory requirements
• Australian standards
• industry codes of practice.

The following resources must be made available for the assessment of this unit:

• workplace location or simulated workplace
• materials relevant to the installation of basic ancillary electrical components that could be fitted to a range of vehicles
• equipment, and hand and power tools appropriate to installing basic ancillary electrical components
• specifications and work instructions.

Method of assessment 

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace instructions may include:

• electronic or hard copy instructions
• verbal instructions
• written instructions.

Job requirements  may include:

• diagnosis and repair methods, processes and equipment.

Workplace health and safety requirements  may include:

• personal protective clothing and equipment
• hazards associated with high voltage ignition systems
• safe use of tools and equipment
• safe handling of material
• use of fire-fighting equipment
• workplace safety policies and procedures
• workplace first aid equipment
• hazard control, including control of hazardous materials and toxic substances.

Procedures and information may include:

• verbal, written and graphical instructions
• signage
• work schedules, plans and specifications
• work bulletins and memos
• material safety data sheets
• diagrams and sketches
• regulatory and legislative requirements relating to automotive industry
• Australian Design Rules
• engineer's design specifications and instructions
• workplace work specifications and requirements
• instructions issued by authorised workplace or external persons
• Australian standards
• vehicle service requirements and repair manuals.

Installation options  may include:

• OEM and workplace instructions
• equipment manufacturer and/or supplier instructions
• aftermarket accessory instructions
• visual inspection and evaluation of components.

Tools and equipment may include:

• hand tools
• testing equipment, including multimeters and ohmmeters
• insulation testers
• crimping tools
• soldering iron
• heat-gun or blower
• wire and cabling of various colours and sizes
• heat shrink sleeving and flexible conduit
• terminals and connectors
• electrical tape.

Basic ancillary electrical equipment  may include:

• driver interlocks
• remote keyless entry
• security alarm systems
• audio systems
• mobile phones
• speed alert systems
• navigation systems
• reverse parking aids, including sensors, audible alerts and cameras
• driver gauges and instruments.

Inappropriate testing procedures  may include:

intrusive testing (whic h must not be performed as it is not a recommended test and repair method), which includes:

• back probing terminals and connectors and fuse holders with inappropriate test probes
• probing terminal and connectors with inappropriate test probes
• pushing sharp probes and objects into wiring insulation.

Faults  may include:

• open circuits
• short circuits
• high resistance circuits
• damaged insulation
• frayed wires
• burnt wiring
• connector damage
• terminal damage
• diagnosis trouble codes (DTC) being set.

Repair options  may include:

• pre- and post-repair testing
• identifying and testing components
• diagnosing and determining faults
• component repair procedures, including:

• removal, replacement and adjustment procedures
• dismantle, repair, reassembly and adjustment procedures

• electrical measurements
• visual and functional assessments, including for damage and wear.

Post-repair testing  may include:

• validating effectiveness of the repair action
• confirming that reported fault has been rectified
• confirming that no other faults are present as a result of the repair action.

Competency field 

Electrical

Unit sector 

Technical – Electrical and Electronic