Modification History
Pathways from the qualification updated.
Three new AUR elective units of competency:
AURTTE3001
AURTTM3001
AURTTM3002
Nine AUR units of competency updated:
AURT300471B replaces AURT300471A
AURTTM3003 replaces AURT301357A
AURTTM3004 replaces AURT301383A
AURTTM3005 replaces AURT334606A
AURTTM3006 replaces AURT334608A
AURTTM3007 replaces AURT334808A
AURTTM3008 replaces AURT301383A
AURTTM3010 replaces AURT301359A
AURTTM3011 replaces AURT301483A
Seven imported units of competency updated:
MEM07005C replaces MEM07005B
TLID1001A replaces TLID107C
TLID2004A replaces TLID407C
TLID2010A replaces TLID1007C
TLID2013A replaces TLID1307C
TLID3011A replaces TLID1107C
TLILIC2001A replaces TLILIC108A
Description
This qualification covers the skills and knowledge required to perform a range of tasks related to servicing and repairing mechanical components/systems of cars, heavy vehicles and/or motorcycles within an automotive service and repair business. It is suitable for entry into the automotive retail, service and repair industry.
Job roles /employment outcomes
The Certificate II in Automotive Mechanical is intended to prepare new employees or recognise and develop existing workers who are performing servicing and repair of particular components/systems of vehicles in an automotive service or repair business.
Employment outcomes targeted by this qualification include:
- vehicle serviceperson.
Application
This qualification is suitable for an Australian Apprenticeship pathway.
Pathways Information
Pathways into the qualification
This qualification may be accessed by direct entry. Credit will be granted towards this qualification to those who have completed AUR10105 Certificate I in Automotive or other relevant qualifications.
Pathways from the qualification
Further training pathways from this qualification include AUR30405 Certificate III in Automotive Mechanical Technology, AUR30611 Certificate III in Automotive Specialist or other relevant qualifications.
Additional qualification advice
The Certificate II in Automotive Mechanical may be attained as a generic qualification, or where a particular occupational outcome is required, may include a specialisation.
Specialisations for this qualification include:
- airconditioning
- cooling system
- cylinder head reconditioning
- driveline/transmission
- exhaust fitting
- steering and suspension
- tyre fitting heavy
- tyre fitting light
- underbody.
Advice is provided at the end of this qualification on the recommended units of competency for each specialisation.
Where elective units of competency are packaged to suit a particular industry sector or occupational outcome, Registered Training Organisations (RTOs) might issue, for example, a:
Certificate II in Automotive Mechanical (specialising in steering and suspension) |
OR |
Certificate II in Automotive Mechanical (steering and suspension) |
It should be noted that a qualification with a specialisation does not change the title of the qualification, although RTOs may choose to record the specialisation below the title.
Licensing/Regulatory Information
Licensing considerations
Some jurisdictions require this qualification for licensing purposes. In addition some units in this qualification may have licensing or regulatory requirements, depending on the work context. Local regulations should be checked for details.
Entry Requirements
Not Applicable
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
The following table contains a summary of the Employability Skills as identified by the Automotive retail, service and repair industry for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the Certificate II in Automotive Mechanical, competency must be achieved in thirteen (13 ) units of competency.
- one (1 ) core unit of competency
- twelve (12 ) elective units of competency, as specified below.
- one (1 ) elective unit of competency from Group A
- a minimum of eight (8 ) elective units of competency from Group B
- a maximum of three (3 ) elective units of competency from Group C, drawn from any combination of:
- units not already chosen from Group B
- relevant units available in this Training Package, other endorsed Training Packages and accredited courses, where those units are aligned to Certificate II and III qualifications
- a maximum of two (2 ) elective units may be selected from units aligned to Certificate III qualifications.
Note :
Where prerequisite units are identified they must be counted in the total number of units required for completion of the qualification.
The following pairs of units must not be chosen together when achieving this qualification:
MEM05003B |
Perform soft soldering |
AURV223808A |
Carry out soft soldering techniques |
MEM05004C |
Perform routine oxy acetylene welding |
AURV223608A |
Carry out oxy acetylene welding, thermal cutting and thermal heating procedures |
MEM05007C |
Perform manual heating and thermal cutting |
AURV223608A |
Carry out oxy acetylene welding, thermal cutting and thermal heating procedures |
MEM05017D |
Weld using gas metal arc welding process |
AURV281308A |
Carry out gas metal arc (MIG) welding procedures |
Core units of competency
- Complete the following one (1 ) unit of competency.
AURC270103A |
Apply safe working practices |
Elective units of competency
Group A - Elective units
- Select one (1 ) unit of competency from the following list.
AURC272003A |
Apply environmental regulations and best practice in a workplace or business |
AURT271781A |
Implement and monitor environmental regulations in the automotive mechanical industry |
Group B - Other elective units
- Select a minimum of eight (8 ) units of competency from the following lists.
Brakes |
|
AURE311666A |
Repair electric braking systems |
AURT210170A |
Inspect and service braking systems |
AURT210605A |
Attach friction materials and radius grind |
AURT210736A |
Machine brake drums and brake disc rotors |
AURT211170A |
Inspect and service air braking systems |
AURT310104A |
Assemble and fit braking systems/components |
AURT310166A |
Repair hydraulic braking systems |
AURT310171A |
Inspect, service and repair auxiliary braking systems |
AURT311166A |
Repair air braking systems |
Common |
|
AURC270688A |
Work effectively with others |
AURC270789A |
Communicate effectively in the workplace |
AURC270889A |
Communicate business information |
AURC359554A |
Provide technical guidance |
AURC361101A |
Adapt work processes to new technologies |
AURC361230A |
Inspect technical quality of work |
AURC361337A |
Maintain quality systems |
AURC365722A |
Estimate complex jobs |
BSBCMN311B |
Maintain workplace safety |
HLTFA301B |
Apply first aid |
MSAENV272B |
Participate in environmentally sustainable work practices |
TLID2010A |
Operate a forklift |
TLID1001A |
Shift materials safely using manual handling methods |
TLID3011A |
Conduct specialised forklift operations |
TLID2013A |
Move materials mechanically using automated equipment |
TLID2004A |
Load and unload goods/cargo |
TLILIC2001A |
Licence to operate a forklift truck |
Electrical /electronic |
Prerequisites |
|
AURE218664A |
Remove and replace electrical/electronic units/assemblies |
|
AURE218670A |
Service, maintain or replace batteries |
|
AURE218676A |
Test, service and charge batteries |
|
AURE218708A |
Carry out repairs to single electrical circuits |
|
AURE218764A |
Remove, refit and test electrical componentry for normal operation following body repair activities |
|
AURE219331A |
Install, test and repair low voltage wiring/lighting systems |
|
AURE219431A |
Install, test and repair electrical security systems/components |
|
AURE219531A |
Install ancillary electrical components |
|
AURE220140A |
Manufacture and repair wiring harness/looms |
|
AURE224008A |
Carry out soldering of electrical wiring/circuits |
|
AURE318866A |
Repair electrical systems |
|
AURE318966A |
Repair instruments and warning systems |
|
AURE319145A |
Overhaul charging system alternators |
|
AURE319166B |
Repair charging systems |
|
AURE319245A |
Overhaul starting motors |
|
AURE319266B |
Repair starting systems |
|
AURE319271A |
Inspect, service and repair AC electric motor drive systems |
|
AURE320031B |
Install marine electrical systems and components |
|
AURE320066B |
Diagnose and repair marine electrical systems and components |
|
AURE320666B |
Repair ignition systems |
|
AURE320871A |
Service and repair electronically controlled steering systems |
|
AURE320971A |
Service and repair electronically controlled suspension systems |
|
AURE321066A |
Repair electronic systems |
|
AURE321171A |
Service and repair electronic spark ignition engine management systems |
|
AURE321271A |
Service and repair electronic drive management systems |
|
AURE321371A |
Service and repair electronic body management systems |
|
AURE321471A |
Service and repair electronically controlled anti-lock braking systems |
|
AURE321571A |
Service and repair electronically operated traction control system |
|
AURE321671A |
Service and repair electronically operated stability control systems |
|
AURE321771A |
Service and repair electronic compression ignition engine management systems |
|
AURE321831B |
Install marine electronic systems and components |
|
AURE321971A |
Inspect, service and repair electronic management, monitoring and tracking systems |
Engines , systems and transmissions |
Prerequisites |
|
AURT200368A |
Select and use bearings, seals, gaskets, sealants and adhesives |
|
AURT201164A |
Remove and install engine assemblies |
|
AURT201170A |
Inspect and service engines |
|
AURT202166B |
Repair cooling systems |
|
AURT202170B |
Inspect and service cooling systems |
|
AURT202608A |
Carry out radiator repairs |
|
AURT203170B |
Service petrol fuel systems |
|
AURT203670B |
Service diesel fuel injection systems |
|
AURT204670A |
Inspect and service emission control systems |
|
AURT205123A |
Fabricate exhaust system/components |
|
AURT205166A |
Repair exhaust system components |
|
AURT206670A |
Inspect and service transmissions (manual) |
|
AURT207170A |
Inspect and service transmissions (automatic) |
|
AURT208170A |
Service transmissions (hydrostatic) |
|
AURT212670A |
Service final drive assemblies |
|
AURT213165A |
Remove and refit driveline components |
|
AURT213170A |
Service final drive (driveline) |
|
AURT303166B |
Repair petrol fuel systems |
|
AURT303666A |
Repair diesel fuel systems |
|
AURT304031A |
Install LPG/CNG electrical control equipment |
|
AURT304231A |
Install LPG fuel systems |
|
AURT304266A |
Repair LPG fuel systems |
|
AURT304270A |
Service LPG fuel systems |
|
AURT304331A |
Install CNG fuel systems |
|
AURT304366A |
Repair CNG fuel systems |
|
AURT304370A |
Service CNG fuel systems |
|
AURT304431A |
Install LNG fuel systems |
|
AURT304466A |
Repair LNG fuel systems |
|
AURT304470A |
Service LNG fuel systems |
|
AURT304666A |
Repair and replace emission control systems |
|
AURT305671A |
Inspect and repair engine forced induction systems |
|
AURT306170A |
Inspect, service and/or repair clutch assemblies and associated operating system components |
|
AURT308166A |
Repair transmissions (hydrostatic) |
|
AURTTM3007 |
Carry out grinding operations |
|
AURT334972A |
Set, operate and monitor specialist machines |
|
AURT335108A |
Carry out machining operations |
|
AURTH301166A |
Repair engines and associated engine components (heavy vehicle) |
|
AURTH306666A |
Repair transmissions - manual (heavy vehicle) |
|
AURTH307165A |
Inspect, test and replace transmissions - automatic (heavy vehicle) |
|
AURTH307166A |
Repair transmissions - automatic (heavy vehicle) |
|
AURTH312666A |
Repair final drive assemblies (heavy vehicle) |
|
AURTH313166A |
Repair final drive - driveline (heavy vehicle) |
|
AURTL301166A |
Repair engines and associated engine components (light vehicle) |
|
AURTL306666A |
Repair transmissions - manual (light vehicle) |
|
AURTL307166A |
Repair transmissions - automatic (light vehicle) |
|
AURTL312666A |
Repair final drive assemblies (light vehicle) |
|
AURTL313166A |
Repair final drive - driveline (light vehicle) |
|
AURTTE3001 |
Apply knowledge of engine science |
|
AURTTM3001 |
Operate and monitor computer numerical control machines |
|
AURTTM3002 |
Repair bearing tunnels and connecting rods in engines |
|
AURTTM3003 |
Apply metal to rebuild engine components |
|
AURTTM3004 |
Assemble engine blocks and sub-assemblies |
|
AURTTM3005 |
Balance rotating and reciprocating engine components |
|
AURTTM3006 |
Perform advanced machining and blueprinting of engine components |
|
AURTTM3007 |
Carry out grinding operations |
|
AURTTM3008 |
Dismantle and evaluate engine blocks and sub-assemblies |
|
AURTTM3010 |
Heat treat, straighten and reclaim engine components |
|
AURTTM3011 |
Recondition engine cylinder heads |
|
MEM07005C |
Perform general machining |
MEM09002B MEM12023A MEM18001C |
General mechanical |
|
AURC252103A |
Apply basic automotive troubleshooting processes |
AURT200108A |
Carry out servicing operations |
AURT209170A |
Service hydraulic systems |
AURT209671A |
Inspect, service and repair pneumatic systems |
AURT222170A |
Service air compressors and air lines |
AURT222171A |
Service, repair and replace air compressors/components |
AURT222631A |
Install air conditioning systems |
AURT222670A |
Service air conditioning systems |
AURT223104A |
Assemble and install refrigeration systems/components |
AURT225156A |
Read and interpret engineering drawings |
AURT225191A |
Produce drawings from design concepts |
AURT225291A |
Produce patterns and templates |
AURT225667A |
Use and maintain measuring equipment |
AURT226008A |
Carry out pre-repair operations (mechanical) |
AURT237272A |
Service and repair trailers up to 4.5 tonnes |
AURT270278A |
Use and maintain workplace tools and equipment |
AURT300373A |
Synchronise plant/equipment |
AURT300471B |
Inspect, service and repair harvesting equipment |
AURT300571A |
Inspect, service and repair crop planting and seeding equipment |
AURT300671A |
Inspect, service and repair spraying and spreading equipment |
AURT300771A |
Inspect, service and repair lift truck mast assemblies |
AURT309131B |
Install hydraulic systems to specified applications |
AURT309140A |
Manufacture and install fluid power hose assemblies |
AURT309166A |
Repair hydraulic systems |
AURT309604A |
Assemble and install pneumatic systems/components |
AURT309627A |
Identify and apply pneumatic wheeled traction performance enhancement systems (heavy vehicle) |
AURT322645A |
Overhaul air conditioning system components |
AURT322666A |
Repair/retrofit air conditioning systems |
AURT325149A |
Prepare engineering drawings |
AURT337119A |
Drive and manoeuvre trailer(s) |
AURT337273A |
Service and repair trailers in excess of 4.5 tonnes |
AURT365130A |
Inspect vehicle systems and determine preferred repair action |
AURT365508A |
Carry out vehicle safety/roadworthy inspection |
AURT366108A |
Carry out diagnostic procedures |
AURT366308A |
Carry out advanced diagnostic procedures |
MEM09002B |
Interpret technical drawing |
MEM12023A |
Perform engineering measurements |
MEM18001C |
Use hand tools |
MEM18002B |
Use power tools/hand held operations |
Steering and suspension |
|
AURT215130A |
Inspect steering systems |
AURT215170A |
Insect and service steering systems |
AURT216130A |
Inspect suspension system |
AURT216170A |
Inspect and service suspension systems |
AURT316168A |
Select and install performance enhanced suspension system products |
AURT316171A |
Service and rectify faults in lift assisted suspension systems |
AURT316271A |
Inspect, service and repair tracked type drive and support systems |
AURT316316A |
Determine compliance of steering and suspension modifications |
AURTH315166A |
Repair steering systems (heavy vehicle) |
AURTH316166A |
Repair suspension systems (heavy vehicle) |
AURTL315166A |
Repair steering systems (light vehicle) |
AURTL316166A |
Repair suspension systems (light vehicle) |
AURTM315166A |
Repair steering systems (motorcycle) |
AURTM316166A |
Repair suspension systems (motorcycle) |
Tyres , rims and wheels |
|
AURT217606A |
Balance wheels and tyres |
AURT217665A |
Remove, fit and inspect wheel assemblies |
AURT217668A |
Select tyres and rims for specific applications (light) |
AURT217766A |
Remove, inspect, repair and fit tyres and tubes (light) |
AURT217865A |
Remove and refit wheel hubs and associated brake components |
AURT217966A |
Remove, inspect, repair and fit tyres and tubes (heavy) |
AURT217985A |
Fit tyres and rims for specific applications (heavy) |
AURT317172A |
Reset steering system alignment adjustments to customer specifications |
AURT317968A |
Identify and fit tyres and rims for specific applications (heavy) |
AURT318054A |
Provide advice on the effects of wheel and tyre combinations |
AURTH317108A |
Carry out wheel alignment operations (heavy vehicle) |
AURTL317108A |
Carry out wheel alignment operations (light vehicle) |
Vehicle body |
|
AURV327164A |
Remove and replace supplementary restraint systems (SRS) |
AURV328166A |
Repair and align motorcycle frames |
Welding |
Prerequisites |
|
AURV223608A |
Carry out oxy acetylene welding, thermal cutting and thermal heating procedures |
|
AURV223808A |
Carry out soft soldering techniques |
|
AURV281108A |
Carry out manual metal arc welding procedures |
|
AURV281208A |
Carry out brazing procedures |
|
AURV281308A |
Carry out gas metal arc (MIG) welding procedures |
|
AURV281408A |
Carry out gas tungsten arc (TIG) welding procedures |
|
AURV281508A |
Carry out spot welding procedures |
|
AURV323908A |
Carry out thermoplastic welding procedures |
|
MEM05003B |
Perform soft soldering |
|
MEM05004C |
Perform routine oxy acetylene welding |
|
MEM05007C |
Perform manual heating and thermal cutting |
|
MEM05017D |
Weld using gas metal arc welding process |
MEM05050B MEM05051A MEM05052A MEM12023A MEM18001C MEM18002B MEM09002B |
MEM05050B |
Perform routine gas metal arc welding |
|
MEM05051A |
Select welding processes |
|
MEM05052A |
Apply safe welding practices |
Group C - Balance of units
- The balance of units, to a maximum of three (3 ), may be drawn from any combination of:
- units not already chosen from Group B
- relevant units available in this Training Package, other endorsed Training Packages and accredited courses, where those units are aligned to Certificate II and III qualifications.
Specialisation advice
Unit selection for a particular occupational stream must adhere to the packaging rules specified above. Examples of appropriate elective units for particular outcomes are provided below.
Note: A specialisation does not alter the title of the qualification although RTOs may choose to record the specialist occupational stream. Refer to Additional qualification advice .
Air conditioning
The following five (5) units are recommended for this specialisation.
AURE218708A |
Carry out repairs to single electrical circuits |
AURT222631A |
Install air conditioning systems |
AURT222670A |
Service air conditioning systems |
AURT322666A |
Repair/retrofit air conditioning systems |
AURT366108A |
Carry out diagnostic procedures |
Cooling system
The following five (5) units are recommended for this specialisation.
AURT202170B |
Inspect and service cooling systems |
AURT202608A |
Carry out radiator repairs |
MEM05003B |
Perform soft soldering |
MEM05004C |
Perform routine oxy acetylene welding |
MEM05007C |
Perform manual heating and thermal cutting |
Cylinder head reconditioning
The following four (3) units are recommended for this specialisation.
Prerequisites |
||
AURT225667A |
Use and maintain measuring equipment |
|
AURTTM3011 |
Recondition engine cylinder heads |
|
MEM07005C |
Perform general machining |
MEM09002B MEM12023A MEM18001C |
Driveline /transmission
The following six (6) units are recommended for this specialisation.
AURE218708A |
Carry out repairs to single electrical circuits |
AURT202170B |
Inspect and service cooling systems |
AURT206670A |
Inspect and service transmissions (manual) |
AURT207170A |
Inspect and service transmissions (automatic) |
AURT212670A |
Service final drive assemblies |
AURT213170A |
Service final drive (driveline) |
Exhaust fitting
The following three (3) units are recommended for this specialisation.
AURT205123A |
Fabricate exhaust system/components |
AURT205166A |
Repair exhaust system components |
MEM05050B |
Perform routine gas metal arc welding |
Steering and suspension
The following six (6) units are recommended for this specialisation.
AURC252103A |
Apply basic automotive troubleshooting processes |
AURE218676A |
Test, service and charge batteries |
AURT215170A |
Inspect and service steering systems |
AURT216170A |
Inspect and service suspension systems |
AURT217606A |
Balance wheels and tyres |
AURT225667A |
Use and maintain measuring equipment |
Tyre fitting heavy
The following four (4) units are recommended for this specialisation.
AURT217606A |
Balance wheels and tyres |
AURT217665A |
Remove, fit and inspect wheel assemblies |
AURT217966A |
Remove, inspect, repair and fit tyres and tubes (heavy) |
AURT217985A |
Fit tyres and rims for specific applications (heavy) |
Tyre fitting light
The following four (4) units are recommended for this specialisation.
AURT217606A |
Balance wheels and tyres |
AURT217665A |
Remove, fit and inspect wheel assemblies |
AURT217668A |
Select tyres and rims for specific applications (light) |
AURT217766A |
Remove, inspect, repair and fit tyres and tubes (light) |
Underbody
The following eight (8) units are recommended for this specialisation.
AURT205123A |
Fabricate exhaust system/components |
AURT205166A |
Repair exhaust system components |
AURT210170A |
Inspect and service braking systems |
AURT210736A |
Machine brake drums and brake disc rotors |
AURT215170A |
Inspect and service steering systems |
AURT216170A |
Inspect and service suspension systems |
MEM05004C |
Perform routine oxy acetylene welding |
MEM05007C |
Perform manual heating and thermal cutting |