Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit describes the application of the required skills and knowledge to produce drawings using computer aided drafting techniques, required in the design, development and production of bus/trucks/trailers. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication. |
Application of the Unit
Application of the unit |
The unit applies to the automotive and related component manufacturing environment and involves application of skills and knowledge to be used within the scope of the person's job and authority. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Not applicable.
Employability Skills Information
Employability skills |
This unit contains Employability Skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge and/or the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Clarify computer-aided drawings (CAD) designer requirements |
1.1. CAD project objectives are clarified and defined in accordance with organisation requirements 1.2. Relevant parameters are identified and interpreted 1.3. CAD requirements and processes are clarified based on consideration of project objectives and identified parameters |
2. Select tools, equipment and computer hardware and software |
2.1. Required computer hardware, software, tools, and equipment for the CAD project are selected and prepared in accordance with organisation procedures |
3. Set up required CAD package |
3.1. The required computer hardware for the CAD task is set up in accordance with manufacturer and organisation requirements 3.2. The CAD software package is installed in accordance with the software manufacturer instructions and statutory requirements 3.3. Files of digitised information relevant to the project are retrieved and converted if required |
4. Gather object parameters and/or measurements |
4.1. Any measurements of components, sub-assemblies, products, models, equipment, layouts or facilities needed for the preparation of the required drawings are made and recorded 4.2. Calculations of required dimensions and other drafting details based on measurements are made 4.3. Critical information relevant to the CAD project is identified |
5. Prepare drawings |
5.1. Critical dimensions and data for the required drawings are established 5.2. Preliminary sketches are prepared as required and reviewed with design, engineering, production and/or appropriate personnel 5.3. The CAD package is accessed using the necessary commands and protocol in accordance with the operating instructions of the CAD software manufacturer and organisation procedures 5.4. Peripheral equipment such as scanners, printers, plotters etc. are used as required 5.5. Complex 2D and 3D computer graphics systems are used where required 5.6. The CAD package is used to prepare drawings consistent with the project objectives and specifications |
6. Check drawings and save drawing files |
6.1. Drawings are checked against project objectives, specifications and organisation standards 6.2. CAD data files are stored in accordance with organisation procedures and archiving requirements |
7. Plot drawings |
7.1. Computer plotter is activated in accordance with applicable computer hardware and peripheral equipment protocols 7.2. Retrieved information is correctly plotted in accordance with software application package instructions and task requirements |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level, required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. |
|
Overview of assessment |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Evidence of the following is essential:
|
Context of and specific resources for assessment |
|
Method of assessment |
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
|
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. |
|
Organisation requirements may include: |
|
Relevant parameters may include: |
|
Critical information may include: |
|
Appropriate personnel may include: |
|
2D and 3D computer graphics systems may include: |
|
Unit Sector(s)
Unit sector |
Technology (Computing) - Manufacture |
Competency field
Competency field |
Manufacturing - Common |
Co-requisite units
Not applicable.