Unit of competency
Modification History
Release |
TP Version |
Comment |
1 |
AHCv1.0 |
Initial release |
Application
This unit of competency describes the skills and knowledge required to prepare combs and cutters for machine shearing.
All work must be carried out to comply with workplace procedures and work health and safety.
This unit applies to individuals who work under broad direction and take responsibility for their own work including limited responsibility for the work of others. They use discretion and judgement in the selection and use of available resources.
No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Pre-requisite Unit
Nil.
Unit Sector
Shearing (SHG)
Elements and Performance Criteria
Element |
Performance criteria |
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Grind combs and cutters |
1.1 Check the grinder and its location for safety hazards and implement control measures 1.2 Identify faulty components and determine level of repair or replacement requirements 1.3 Operate grinder in a safe manner without risk of injury to operator or others or damage to equipment 1.4 Adjust pendulum pin settings, confirm set and pendulum bar is clean and check for level 1.5 Test grinding plates visually in terms of being balanced and true 1.6 Identify worn and incorrectly adhered papers and replace 1.7 Set grinder 1.8 Identify even wear of combs and cutters and sharpen combs and cutters |
2. Dress combs |
2.1 Select bevel and modify appropriate to wool type 2.2 Determine factors affecting combs selection in terms of type of livestock and seasonal conditions 2.3 Dress comb teeth to uniform shape and length 2.4 Thin comb teeth uniformly along their length 2.5 Polish comb leaving no rough or sharp points |
Foundation Skills
Foundation Skills essential to performance are explicit in the performance criteria of this unit of competency.
Range of Conditions
Unit Mapping Information
This unit is equivalent to AHCSHG302A Prepare combs and cutters for machine shearing
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=c6399549-9c62-4a5e-bf1a-524b2322cf72