Unit of competency details
AHCARB320 - Install tree support systems (Release 1)
Summary
Usage recommendation:
Current
Releases:
| 1 1 (this release) |
26/Aug/2020 |
Companion volumes:
Unit of competency
Assessment requirements
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 050301 | Horticulture | 26/Aug/2020 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
|
Release
|
Comments
|
|
Release 1
|
This version released with AHC Agriculture, Horticulture and Conservation and Land Management Training Package Version 5.0.
|
Application
This unit of competency describes the skills and knowledge required to install tree support systems including cable and bracing hardware into the structure of a tree.
The unit applies to individuals who work in arboriculture under broad direction and take responsibility for their own work. They use discretion and judgement in the selection, allocation and use of available resources and for solving problems.
The arboriculture industry requires that all tree support systems work is undertaken according to preferred industry practices (as outlined in the Companion Volume).
Legislation, regulations and by-laws relating to the treatment and removal of trees apply in some states and territories.
Pre-requisite Unit
Nil
Unit Sector
Arboriculture (ARB)
Elements and Performance Criteria
|
Elements
|
Performance Criteria
|
|
Elements describe the essential outcomes.
|
Performance criteria describe the performance needed to demonstrate achievement of the element.
|
|
1. Prepare for work
|
1.1 Read and interpret arborist plans and specifications for tree support system for specified tree
1.2 Determine and obtain materials required for installing tree support system
1.3 Undertake a site-specific job safety analysis (JSA), record and implement control measures according to workplace safety procedures
1.4 Select tree support system tools and equipment for tree support system activity
1.5 Select, check and use personal protective equipment
1.6 Confirm availability of first aid and emergency personnel, equipment and procedures
1.7 Assemble and position tools, equipment and materials for ease of access during installation
|
|
2. Prepare trees for tree support system
|
2.1 Locate tree stems and position of tree support system according to specifications
2.2 Assess structural integrity of tree and select low-risk access method for tree support system installation
2.3 Determine a safe procedure for installation and confirm approach with work team
2.4 Access tree safely and attain secure work positions to conduct installation
2.5 Maintain inspection of tree for above-ground hazards throughout installation activities
2.6 Examine stems to be braced for defects to ensure tree support system will comply with specifications
2.7 Undertake pruning activities prior to tree support system installation according to current industry standards
|
|
3. Install tree support system
|
3.1 Select and prepare tree support system materials according to specifications
3.2 Prepare the stems to be braced according to tree support system design
3.3 Install tree support system components according to arborist specifications and manufacturer instructions
3.4 Adjust cables and braces to specified tension
3.5 Dress tree support system components for neat finish
3.6 Remove tools, equipment and waste from canopy
3.7 Descend and remove equipment
|
|
4. Finalise tree support system activity
|
4.1 Clean and sanitise tools and equipment according to workplace and biosecurity procedures
4.2 Check, maintain and store tools and equipment according to workplace procedures and manufacturer instructions
4.3 Record and report completed works according to workplace procedures
|
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential for performance in this unit of competency but are not explicit in the performance criteria.
|
Skill
|
Description
|
|
Reading
|
- Interpret and consolidate information from plans and specifications for design requirements and prepare for the installation of tree support systems
|
|
Writing
|
- Accurately record and complete organisational documents, including job safety analysis (JSA) and records, using clear language and correct spelling, grammar and industry terminology
|
|
Numeracy
|
- Interpret and calculate numerical information from specifications to determine the size and dimensions of materials required to construct tree support systems
|
Unit Mapping Information
|
Code and title current version
|
Code and title previous version
|
Comments
|
Equivalence status
|
|
AHCARB320 Install tree support systems
|
AHCARB308 Install cable and bracing
|
Title changed
Element added
Performance criteria clarified
Foundation skills added
Assessment requirements updated
|
Equivalent
|
Links
Companion Volumes, including Implementation Guides, are available at VETNet:Companion Volumes, including Implementation Guides, are available at VETNet: - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=c6399549-9c62-4a5e-bf1a-524b2322cf72
Assessment requirements
Modification History
|
Release
|
Comments
|
|
Release 1
|
This version released with AHC Agriculture, Horticulture and Conservation and Land Management Training Package Version 5.0.
|
Performance Evidence
An individual demonstrating competency must satisfy all of the elements and performance criteria in this unit.
There must be evidence that the individual has installed three different types of tree support systems according to a specification, including:
- steel cable
- textile or synthetic cable
- bracing.
There must also be evidence that the individual has:
- interpreted plans and specifications and determined the materials, tools and equipment required for tree support system work
- identified health, safety and environmental hazard and risks and implemented controls for the installation, including:
- conducted and completed a job safety analysis (JSA)
- prepared and used personal protective equipment (PPE)
- maintained awareness of above-ground hazards while performing work
- assembled tree support system ready for installation
- examined structural integrity of the tree
- determined and confirmed the safest access to location of the tree support system
- pruned tree to aid tree support system installation
- accessed the tree safely and secured into work position
- removed, checked, maintained, cleaned, sanitised and stored tools and equipment according to biosecurity procedures
- recorded and reported completed works.
All tree support systems work is required to be performed according to preferred industry practices (as outlined in the Companion Volume).
Knowledge Evidence
An individual must be able to demonstrate the knowledge required to perform the tasks outlined in the elements and performance criteria of this unit. This includes knowledge of:
- preferred industry practices (as outlined in the Companion Volume) for tree support systems
- the effect of pruning on tree growth, habit and form
- tree anatomy and tree physiology related to tree support systems, including:
- pruning techniques appropriate to tree species and their response
- natural habit and form of trees
- visual tree assessment
- tree defects and tree support system solutions
- tree support systems principles and techniques suited to tree species, including:
- steel cabling
- synthetic cabling
- bracing
- impact of tree support system on trees, including:
- the impact on the tree's natural range of movement
- the impact on the tree's strategy of flexibility
- the impact on the tree's formation of reactive growth
- tree support system materials, tools and equipment, including:
- preparation of steel cabling systems and terminations, including eyes, swaging, wire whipping
- components and preparation of synthetic cabling systems
- hardware, including installation requirements for eye bolts, lag hooks, wire stops and grips
- cable types and sizes, tensile strength and selection criteria as related to arborist specifications
- preparation of bracing components, including types of rod, threading, terminations and tensile strength
- cable tension and tensioning methods
- finishing techniques of cables for aesthetics and function
- finishing techniques of bracing for safety, aesthetics and function
- checks and adjustments to installed systems over time
- identification of workplace health and safety hazards, risk assessment and risk control application
- selection of suitable PPE
- completing a job safety analysis (JSA)
- first aid and rescue personnel, equipment and procedures applicable to tree work
- monitoring and managing above-ground hazards
- electrical safety
- principles of compartmentalisation of decay in trees (CODIT) in relation to the installation of cables and bracing
- hygiene practices and biosecurity when cable bracing, including:
- reasons for managing hygiene
- biosecurity principles and procedures
- record keeping and reporting procedures for cable bracing.
Assessment Conditions
Assessment of the skills in this unit of competency must take place under the following conditions:
- trees with defects requiring cabling and bracing as stipulated in the performance evidence
- resources, equipment and materials:
- equipment to access a working position for installation of cables and bracing
- PPE
- safety equipment, including first aid and emergency response equipment
- tools and equipment for preparing wire and synthetic ropes, attaching cables to trees and installation of braces
- workplace and manufacturer documentation for safe operation, cleaning and storage of tree support system equipment
- preferred industry practices (as outlined in the Companion Volume) for tree support systems
- arboriculture hygiene and biosecurity standards
- specifications for the installation of tree support system for specific tree defects
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards. In particular, assessors must have:
- arboriculture vocational competencies at least to the level being assessed
- current arboriculture industry skills directly relevant to the unit of competency being assessed.
Links
Companion Volumes, including Implementation Guides, are available at VETNet: - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=c6399549-9c62-4a5e-bf1a-524b2322cf72
