Assessment Requirements for RIIHAN309E Conduct telescopic materials handler operations

Release: 1

Assessment Requirements for RIIHAN309E Conduct telescopic materials handler operations

Modification History

Release	Comment
1	This unit replaces RIIHAN309D Conduct telescopic materials handler operations. Performance criteria 7.3 removed. Knowledge evidence amended to remove earthworks from basic calculations. Mapping table added.

Performance Evidence

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of conducting telescopic materials handler operations including:

applying operational safety

accessing, interpreting and applying technical information

calculating volume and weights maintaining equipment written records

applying fault finding techniques

accessing, interpreting and applying environmental management plan

carrying out machine operator maintenance

works effectively with others to undertake and complete the conducting of telescopic materials handler operations that meets all the required outcomes including:

complying with written and verbal reporting requirements and procedures

communicating clearly and concisely with others to receive and clarify work instructions

using load handling communication methods with all parties

using conventional hand and audible signals

demonstrates completion of conducting telescopic materials handler operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

performing pre-start, start-up, park-up and shutdown procedures

checking controls, brakes and attachments for manoeuvrability and serviceability and rectifying or reporting faults

operating the telescopic materials handler

selecting, attaching and securing appropriate slings and lifting gear

shifting the load

selecting, removing and fitting attachments

transporting the machine and equipment between work sites

Knowledge Evidence

The candidate must demonstrate knowledge of the following when conducting telescopic materials handler operations:

telescopic materials handler types, characteristics, technical capabilities and limitations

techniques for calculating safe working loads

telescopic materials handler and attachment operating techniques related to essential tasks

isolation and traffic control responsibilities and authorities

safety data sheet and materials handling methods

methods of changing machine attachments

safe operating techniques in varying terrain

basic calculations

levelling techniques

job safety analyses/safe work method statement

Assessment Conditions

Assessors must satisfy the Standards for Registered Training Organisations (RTOs) 2015/AQTF mandatory competency requirements for assessors; and industry regulations for certification and licensing; and,

this unit is best assessed in the context of this sector’s work environment;

where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other units of competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this unit of competency, and through the minimum years of current* work experience specified below in an industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an industry subject matter expert. The industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the industry sector, including time spent in roles related to the unit being assessed; and,

assessor and industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or industry sector as follows:

Industry sector	AQF** Level	Required assessor or industry subject matter expert experience
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction	1	1 Year
2	2 Years
Drilling, Coal Mining and Extractive (Quarrying)	3-6	3 Years
Metalliferous Mining and Civil Construction	3-6	5 Years
Other sectors	Where this unit is being assessed outside of the Resources and Infrastructure Sectors, assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and, where no industry standard is specified, should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered to indicate the AQF level.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272