Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
This unit describes the skills and knowledge required to select products and perform hair colour and lightening services. This unit of competency will apply to a range of hairdressing services and roles in the workplace. |
Application of the Unit
Application of the Unit |
This unit requires the operator to communicate with clients regarding their desired hair colour finish. It involves the analysis of the characteristics of hair, including natural base colour and percentage of grey or white hair, and the selection and application of colour or high lift tint colour products to cover grey or white hair and/or change or enhance the colour of the hair, or lighten and tone the colour of the hair. Knowledge of the colour wheel, the workplace colour product range, relevant local health regulations and the workplace approach to colour services is required. In the context of an assessment-only and/or a training delivery and assessment pathway, units of competency that relate to this unit are identified in the evidence guide of this unit. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Not applicable.
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the level of performance required to demonstrate achievement of the element. The variables for the bold italicised text are outlined in the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
|||
1 |
Consult with client and prepare for service. |
1.1 |
Client reaction to pre-service skin test is evaluated through observation or access to client history . |
|
1.2 |
Client characteristics are analysed through physical and visual examination and any identified contraindications to proceeding with colour service are identified and explained to client. |
|||
1.3 |
Client history is referred to and previous colour is discussed with client where applicable. |
|||
1.4 |
Client history is established for new colour clients. |
|||
1.5 |
Client satisfaction or dissatisfaction with current hair colour and client expectations are established through questioning and active listening. |
|||
1.6 |
Desired base colour or degree of lift and tone is confirmed with client through discussion and reference to manufacturer's colour charts. |
|||
1.7 |
Strand tests are performed where indicated by the analysis. |
|||
1.8 |
Wraps and towels are applied to ensure client protection and safety according to workplace procedures. |
|||
2 |
Select and use colour products. |
2.1 |
Colour products are selected and prepared according to manufacturer's instructions and workplace procedures. |
|
2.2 |
Stages and methods of product application are performed according to manufacturer's instructions, within designated workplace timeframes and crosschecked for agreed coverage. |
|||
2.3 |
Processing of colour product is monitored through observation and according to manufacturer's instructions. |
|||
2.4 |
Residual product is removed at the end of processing time according to manufacturer's instructions. |
|||
2.5 |
Client and operator comfort and safety are ensured at all stages of the service according to relevant legislation , manufacturer's product safety data sheets and workplace policies and procedures . |
|||
3 |
Select and use high lift tint colour products. |
3.1 |
High lift tint colour products are selected and prepared according to manufacturer's instructions and workplace procedures and within designated workplace timeframes. |
|
3.2 |
Stages and methods of product application are performed quickly and evenly according to manufacturer's instructions and crosschecked for agreed coverage. |
|||
3.3 |
Product processing is timed through observation to achieve desired lift and tone and according to manufacturer's instructions. |
|||
3.4 |
Residual product is removed at the end of processing time according to manufacturer's instructions. |
|||
3.5 |
Client and operator comfort and safety are ensured at all stages of the service according to relevant legislation, manufacturer's product safety data sheets and workplace policies and procedures. |
|||
4 |
Provide after care service and advice. |
4.1 |
Clients are advised on colour care shampoos and conditioners. |
|
4.2 |
Sun protection strategies are suggested to clients. |
|||
4.3 |
After care products are recommended and purchases are recorded on client history. |
|||
4.4 |
Outcomes of service are reviewed against established client expectations and client satisfaction is confirmed . |
|||
4.5 |
Client history is updated to include colour or lightening product selection, technique, outcome of service and aftercare products recommended and purchased. |
|||
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
|
This describes the essential skills and knowledge and their level , required for this unit . |
|
Skills may include : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knowledge may include : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide describes the underpinning knowledge and skills that must be demonstrated to prove competence. It is essential for assessment and must be read in conjunction with the performance criteria, the range statement and the assessment guidelines of the relevant Training Package. |
|
Overview of assessment A person who demonstrates competency in this unit of competency must be able to apply knowledge of the use and application of a defined workplace range of tint and high lift tint colour products for a range of colour outcomes on different clients. Knowledge and skill with regard to relevant legislation and workplace procedures that ensure client and operator comfort, health and safety must also be demonstrated. |
|
Specific evidence requirements |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
|
|
|
|
|
|
|
|
|
|
|
Context of assessment |
For valid and reliable assessment of this unit, competency should be consistently demonstrated over a period of time and observed by the assessor and/or the technical expert working in partnership with the assessor. The technical expert may include the hairdresser and/or an experienced person at the workplace. Competency should be demonstrated in the workplace or a simulated workplace environment in a range of situations which may include client interruptions and involvement in other related activities normally expected in the workplace. For further guidance on the use of an appropriate simulated environment, refer to the Assessment Guidelines in this Training Package. |
Specific resources for assessment |
Competency for this unit should be assessed through access to:
|
Relationship to other units |
This unit requires an assessment outcome that includes evidence of client consultation, along with the safe application of hair colour and high lift colour products, and knowledge of their chemical and physical effects on the hair. Prerequisite units :
Co-requisite units :
|
Method of assessment |
The following assessment methods are suggested.
|
Evidence required for demonstration of consistent performance |
For valid and reliable assessment of this unit, evidence should be gathered through a range of methods to indicate consistent performance. It can be gathered from assessment of the unit of competency alone, through an integrated assessment activity or through a combination of both. Evidence should be gathered as part of the learning process. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that will affect performance. The following variables may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. Bold italicised text from the performance criteria is detailed here. |
|
Clients may include: |
|
Client history must include: |
|
Client characteristics must include: |
|
Contraindications may include: |
|
Colour products must include: |
|
Stages and methods of product application may include: |
|
Client and operator comfort and safety must include: |
|
Relevant legislation may include: |
|
Workplace policies and procedures may include: |
|
High lift tint colour products must include: |
|
Product processing must include: |
|
Unit Sector(s)
Not applicable.
Competency field
Competency Field |
Hairdressing |