Release 1. This is the first release of this unit of competency in the UET Transmission, Distribution and Rail Sector Training Package.

This unit involves the skills and knowledge required to maintain overhead rail traction configurations in the electricity supply industry (ESI).

It includes maintaining and repairing overlaps, cross-overs, turnouts and crossings whilst using safe working practices on or about running line/track. It also includes repairing and/or replacing electrical equipment and associated hardware, identifying and implementing traffic management plans, issuing/accepting electrical permits, isolation of systems and circuits, inspection and checks to confirm equipment and associated hardware are in a safe condition to test and/or return to service, re-commissioning tests to ensure the integrity of the traction system prior to return to service and updating of system data and/or maintenance records.

The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.

Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.

Common Unit Group

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE102A Fabricate, assemble and dismantle utilities industry components

UEENEEE104A Solve problems in d.c. circuits

UEENEEE105A Fix and secure electrotechnology equipment

UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEG101A Solve problems in electromagnetic devices and related circuits

UEENEEG102A Solve problems in low voltage a.c. circuits

UETTDREL11 Apply sustainable energy and environmental procedures

UETTDREL12 Operate plant and equipment near live electrical conductors and apparatus

UETTDREL16 Working safely near live electrical apparatus

UETTDRIS52 Install and maintain poles, structures and associated hardware

UETTDRIS54 Install and maintain poles, structures and overhead conductors and cables

UETTDRRT21 Install traction overhead wiring systems

UETTDRRT22 Maintain traction overhead wiring systems

UETTDRRT23 Install rail traction bonds

UETTDRRT25 Install overhead rail traction configurations

UETTDRRT27 Install overhead traction components and equipment

UETTDRRT28 Maintain overhead traction components and equipment

Rail Traction

Not applicable.

ELEMENTS 

PERFORMANCE CRITERIA 

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1  

Prepare to maintain overhead traction configurations 

1.1 

Work schedules, construction plans, drawings, workplace procedures and material lists are received and confirmed

1.2 

Job requirements and workplace procedures are identified and communicated with relevant personnel

1.3 

Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for the maintenance of overhead traction configurations are obtained and confirmed for the purposes of the work to be performed

1.4 

Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures

1.5 

Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures

1.6 

Relevant work permits are obtained to access rail corridor, understood and signed in accordance with workplace procedures

1.7 

Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order

1.8 

Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures

1.9 

Traffic management plan is confirmed as being applied in accordance with workplace procedures

1.10 

Environmental constraints applicable to work are identified and control measures applied

2 

Perform maintenance of overhead traction configurations 

2.1 

WHS/OHS, sustainable energy and environmental principles and practices are monitored and followed to reduce incidents in accordance with workplace procedures

2.2 

Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures

2.3 

Systems and circuits are checked, isolated and proved safe to work on in accordance with workplace procedures

2.4 

Maintenance of overhead traction configurations is completed in agreed timeframes, to quality standards and with minimum waste in accordance with workplace procedures

2.5 

Electrical equipment and associated hardware are tested in accordance with job requirements and workplace procedures

2.6 

Maintenance, including repair and/or replacement of overhead traction configurations, is completed in accordance with work schedule, job requirements and workplace procedures

2.7 

Unplanned events are responded to in accordance with workplace procedures

2.8 

Quality checks of work are undertaken in accordance with workplace procedures

3 

Complete maintenance of overhead traction configurations 

3.1 

Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures

3.2 

Worksite is rehabilitated, cleaned up and made safe in accordance with workplace procedures

3.3 

Tools, equipment and surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with workplace procedures

3.4 

Relevant work permits are signed off after final inspections and recommissioning checks and the system is energised, tested and returned to service in accordance with workplace procedures

3.5 

Work records, reports and/or documentation are completed in accordance with workplace procedures

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

This unit replaces and is equivalent to UETTDRRT26A Maintain overhead rail traction configurations.

Release 1. This is the first release of this unit of competency in the UET Transmission, Distribution and Rail Sector Training Package.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least two separate occasions and include:

• applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including the use of risk control measures
• applying sustainable energy principles and practices
• obtaining equipment, tools and personal protective equipment (PPE) required for maintaining overhead rail traction configurations that includes at least three (3) of the following types of height and stagger measuring equipment:

• overlap
• cross-over
• turnout crossings
• train/tram crossing

• using at least one (1) of the following types of mobile plant and height equipment:

• elevated work platform (EWP)
• road/rail traction height access equipment, such as ladders

• obtaining equipment, tools and PPE required for maintaining overhead rail traction configurations that includes at least two (2) of the following types of height and stagger measuring equipment:

• height gauge
• stagger gauge
• cant gauge

• isolating systems and circuits that includes at least one (1) of the following types of testing equipment for overhead traction conductor configurations:

• voltage detector (low voltage (LV) or high voltage (HV))
• voltmeter
• insulation resistance tester
• field intensity tester

• dealing with unplanned events on at least one (1) occasion.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

• traction configuration principles, including:

• types
• purpose
• assemblies
• sub-assemblies
• components

• maintenance of traction configurations, including:

• types of components
• types and function of tools and equipment
• maintenance/repair procedures
• inspection and recording procedures

• diagnosis and correction of simple faults in specific traction configurations, including:

• types and causes
• determination of appropriate corrective actions
• repair and replace procedures for components of specific configurations.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated conditions involving realistic and authentic activities that replicate operational workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

• a range of relevant exercises, case studies and/or other simulations
• relevant and appropriate materials, tools, facilities, equipment and PPE currently used in industry for maintaining overhead rail traction configurations
• applicable documentation, including workplace procedures, relevant industry standards, equipment specifications, regulations, codes of practice and operation manuals.