Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
1) Scope: |
1.1) Descriptor |
|
This Competency Standard Unit covers the aerial surveillance of transmission pipelines, easements and/or surrounding environs. The competency standard is applied against the procedures found under latest edition of AS 2885.3 Australian and New Zealand Standard. The competency standard also refers to threat mitigation through identification of system non-conformance. The competency standard outlines the areas to be monitored; inspection of areas; system's pipe work; structures; fittings; equipment; organisational and statutory requirements and recording and reporting. |
Application of the Unit
Application of the Unit |
2) |
This competency standard shall apply to any basic and safe work site where Gas Industry operations occur. |
Licensing/Regulatory Information
License to practice |
3) |
The skills and knowledge described in this unit are not subject to licence regulation other than those directly related to Occupational Health and Safety, gas/petrochemical liquid/electricity/water industry safety and compliance, industrial relations, environmental protection, telecommunications, anti discrimination and training. Commonwealth, State/Territory or Local Government legislation and regulations may exist that limits the age of persons who can operate certain equipment. |
Pre-Requisites
Prerequisite Unit(s) |
4) |
|
Competencies |
4.1) |
|
Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed: |
||
Nil |
Literacy and numeracy skills |
4.2) Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’ |
|||||
Reading |
4 |
Writing |
4 |
Numeracy |
4 |
Employability Skills Information
Employability Skills |
5) |
This unit contains Employability Skills |
|
The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. |
Elements and Performance Criteria Pre-Content
6) Elements describe the essential outcomes of a competency standard unit |
Performance Criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the Evidence Guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
||
1 |
Prepare to conduct aerial surveillance of transmission pipelines, easements and/or surrounding environs |
1.1 |
Routine surveillance of pipeline is conducted and faults reported in a timely manner against work schedule(s) and established procedures and confirmed if necessary by site inspection |
1.2 |
Relevant requirements and established procedures for the work are communicated to all persons |
||
1.3 |
OHS, environmental and sustainable energy policies and procedures related to requirements and established procedures for gas pipeline surveillance are obtained and confirmed for the purposes of the work performed and communicated |
||
1.4 |
Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures |
||
1.5 |
Risk control measures for identified hazards are prioritised, implemented and monitored against the work schedule |
||
1.6 |
Relevant work permits are obtained to access and perform work according to requirements and established procedures |
||
1.7 |
Resources including persons, equipment, tools and personal protective equipment required for pipeline surveillance are identified, scheduled and obtained and confirmed in working order |
||
1.8 |
Liaison and communication issues with authorised persons, authorities, clients and land owners are resolved and activities coordinated to carry out work |
||
1.9 |
Persons participating in the work, including plant operators and contractors are fully briefed and respective responsibilities confirmed where applicable in accordance with established procedures |
||
2 |
Conduct aerial surveillance of transmission pipelines, easements and/or surrounding environs and identify non-conformance |
2.1 |
Analysis of information to identify key issues is undertaken as required and information is evaluated for relevance and validity to the requirements |
2.2 |
Dealings with customers are consistent with standard operating procedures and the special needs of customers are identified and considered in targeting client service |
||
2.3 |
Essential Knowledge and Associated Skills for the pipeline surveillance are applied to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements |
||
2.4 |
Leakages and damaged pipes, fittings and appurtenances are recorded in accordance with the work schedule and established procedures |
||
2.5 |
Hazard warnings and safety signs are recognised and hazards and assessed OHS risks are reported to the immediate authorised persons for directions according to established procedures |
||
2.6 |
Unplanned events in pipeline surveillance are undertaken with the scope of established procedures |
||
2.7 |
System faults and the operational condition of the pipelines are identified and reported and known solutions are applied using Essential Knowledge and Associated Skills |
||
2.8 |
Works in the vicinity of the pipeline are identified and reported and known solutions are applied using Essential Knowledge and Associated Skills |
||
3 |
Review, record and report on transmission pipelines, easements and/or surrounding environ work |
3.1 |
Solutions are developed based on consideration of relevant information and options and proposed solutions are communicated and implemented as required against works schedule, anomalies are reported in accordance with established procedures |
3.2 |
Accidents and injuries are reported in accordance with requirements and established procedures where applicable |
||
3.3 |
Solution is implemented in accordance with standard operating procedures ensuring that action is correctly documented, the transaction is accurately processed and the customer is advised |
||
3.4 |
Work completion records, reports and documentation are finalised and processed and appropriate persons notified |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
8) This describes the essential skills and knowledge and their level, required for this unit. |
Evidence shall show that knowledge has been acquired of safe working practices for aerial transmission pipeline surveillance. |
All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies. |
KS01-G315B |
Transmission pipeline aerial surveillance |
|
G 3.3.1 |
Consulting appropriate persons to coordinate work and persons Evidence shall show an understanding of consulting appropriate persons to coordinate work and persons on Gas Industry pipeline (Transmission) systems, indicated by the following:
|
|
G 3.3.4 |
Liaise and communicate with relevant authorities Evidence shall show an understanding of liaising with the relevant authorities in relation to Gas Industry pipelines (Transmission), indicated by the following:
|
|
G 3.3.7 |
Prepare reports Evidence shall show an understanding of the preparing of reports applicable to Gas Industry pipelines (Transmission), indicated by the following:
|
|
G 3.3.10 |
Notify of completion of work Evidence shall show an understanding of the notification of completion of work procedures in Gas Industry pipelines (Transmission), indicated by the following:
|
|
G 4.1.1 |
Operate and supervise in the Gas Industry Evidence shall show an understanding of supervising and operating in a Gas Industry environment, indicated by the following:
|
|
G 4.1.3 |
Communicate effectively in the Gas Industry at a supervisory level Evidence shall show an understanding of communication techniques required in supervisory roles in the Gas Industry, indicated by the following:
|
|
G 4.1.4 |
Understand Gas Industry products, processes and characteristics Evidence shall show a comprehensive understanding of Gas Industry products and characteristics, indicated by the following:
|
|
G 4.1.5 |
Interpret Gas Industry drawings Evidence shall show an ability to interpret and understand Gas Industry technical drawings, indicated by the following:
|
|
G 4.1.6 |
Understand OHS and First Aid requirements for Gas Industry supervisors Evidence shall show an understanding of OHS and First Aid requirements for gas industry supervisors and autonomous working staff, indicated by the following:
|
|
G 4.1.7 |
Create Gas Industry reports and documentation Evidence shall show an understanding and application of completing and interpreting enterprise-specific supervisory level Gas Industry reports including ,but not limited to:
|
|
G 4.1.8 |
Use a personal computer Evidence shall demonstrate requirements to use personal computer and undertake fundamental tasks, indicated by the following:
|
|
G 4.1.10 |
Understanding security breach procedures Evidence shall show an understanding required to identify security breaches and the required action in dealing with such breaches, indicated by the following as applicable:
|
|
G 4.1.15 |
Drive Gas Industry vehicles Evidence shall show an understanding of requirements and capability of driving applicable Gas Industry vehicles including but not limited to:
Note: All vehicles included in this clause have licence or ticket requirements. The licence or ticket will need to be issued to the learner for completion of relevant sections of the EKAS Clause. |
|
G 4.1.20 |
Understand and implement transmission pipeline environmental protection processes Evidence shall show an understanding on environmental impacts of a gas transmission pipeline, indicated by the following:
|
Evidence Guide
EVIDENCE GUIDE |
9) The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package. |
Overview of Assessment |
9.1) |
Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, all summative (or final) assessment is to include the application of the competency in the normal work environment or, at a minimum, its application in a realistically simulated work environment. In some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry regulatory policy in this regard. |
|
Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed. |
|
The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment. |
|
Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for assessors to consider when choosing an assessment method and developing assessment instruments. Sample instruments are included for Assessors in the Assessment Guidelines of this Training Package. |
Critical aspects of evidence required to demonstrate competency in this unit |
9.2) |
Before the critical aspects of evidence are considered all prerequisites shall be met. |
|
Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Range of tools/equipment/procedures/workplace |
||||
Group No |
The minimum number of items on which skill is to be demonstrated |
Item List |
||
A |
All |
Identify threats to the integrity of transmission pipelines Evaluate threats to the integrity of transmission pipelines Control of the escalation of threats to the public, environment, transmission pipelines and facilities Working knowledge of relevant sections of latest edition of AS2885.3 Pipelines-Gas and Liquid Petroleum Gas Operations and Maintenance: Sections 3, 4.3, 5.3.6.1, 5.4.1, 5.4.3, 5.5 section 6 threat mitigation Demonstration of the practical use of communication equipment Identifying faults Recording information |
||
B |
All |
Interpret technical drawings and symbols Work using relevant OHS and legislation, regulations, codes of practice, policies, procedures
Work safely with hazardous materials and equipment Apply safe manual handling techniques Communicate effectively in the workplace Practical knowledge of the properties of product being transported Apply basic planning skills First Aid certificate level 1 |
||
C |
At least one occasion |
Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items |
Context of and specific resources for assessment |
9.3) |
This unit contains Employability Skills |
|
This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include: |
|
|
|
|
|
|
|
|
|
|
|
In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency in aerial transmission pipeline surveillance. |
|
Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills. |
Method of assessment |
9.4) |
This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’. |
|
Note: Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit. |
Concurrent assessment and relationship with other units |
9.5) |
|
There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied Competency Standard Units where listed. |
||
UEGNSG302B |
Maintain pipeline easements |
|
UEGNSG329A |
Gas transmission pipeline surveillance |
|
UEGNSG308B |
Identify, evaluate and control threats to transmission pipelines |
|
UEGNSG309B |
First on site emergency response on a transmission pipeline |
|
UEGNSG310B |
Supervise and monitor contract work |
|
UEGNSG311B |
Site control of third party works in the vicinity of a transmission pipeline |
Range Statement
RANGE STATEMENT |
10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance. |
This Competency Standard Unit shall be demonstrated in relation to aerial transmission pipeline surveillance. The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit: |
Areas to be monitored |
Inspection of areas |
Systems pipe work |
Structures |
Fittings and appurtenances |
Organisational and statutory requirements (3) |
Recording and reporting |
Tools and equipment (4) |
Maps and drawings |
Established procedures |
PPE and First Aid equipment |
External interference |
Aerial |
Aerial hazards |
Transmission pipeline standards |
Maps and drawings |
Unit Sector(s)
Not applicable.
Competency Field
Competency Field |
11) |
Transmission. |