Modification History
Not Applicable
Unit Descriptor
Unit Descriptor |
1 ) 1 .1 ) Descriptor |
This unit covers the installation of protection devices, switchgear and controlgear, appliances and luminaries and intended to operate at voltages up to 1,000 V a.c. or 1,500 V d.c. It encompasses working safely and to installation standards, matching equipment with that specified for a given location, placing and securing equipment accurately, making required circuit connections and completing the necessary installation documentation. |
Application of the Unit
Application of the Unit |
4 ) |
This unit is intended for competency development in entry-level employment based programs incorporated in approved contracts of training. |
Licensing/Regulatory Information
1 .2 ) License to practice |
The skills and knowledge described in this unit require a license to practice in the workplace subject to regulations for undertaking of electrical work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships. Note: |
Pre-Requisites
Prerequisite Unit (s ) |
2 ) |
2 .1 ) Competencies |
|
Granting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed. UEENEEE002B Dismantle, assemble and fabricate electrotechnology components UEENEEE005B Fix and secure equipment UEENEEE007B Use drawings, diagrams, schedules and manuals For the full prerequisite chain details for this unit please refer to Table 2 in Volume 1, Part 2 |
Employability Skills Information
Employability Skills |
3 ) This unit contains Employability Skills The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. |
Elements and Performance Criteria Pre-Content
6 ) Elements describe the essential outcomes of a unit of competency |
Performance criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
||
1 |
Prepare to install apparatus and associated equipment. |
1.1 |
OHS procedures for a given work area are identified, obtained and understood. |
1.2 |
Health and safety risks are identified and established risk control measures and procedures in preparation for the work are followed. |
||
1.3 |
Safety hazards that have not previously been identified are noted and established risk control measures are implemented. |
||
1.4 |
Installation of apparatus is prepared in consultation with other affected by the work and sequenced appropriately. |
||
1.5 |
The nature and location of the work is determined from documentation or appropriate person to establish the scope of work to be undertaken. |
||
1.6 |
Locations of apparatus and associated equipment are planned within the constraints of the building structure, significants and regulations. |
||
1.7 |
Advice is sought from appropriate persons to ensure the work is coordinated effectively with others. |
||
1.8 |
Material needed for the installation work is obtained in accordance with established procedures and checked against job requirements. |
||
1.9 |
Tools, equipment and testing devices needed to for the installation work are obtained in accordance with established procedures and checked for correct operation and safety. |
||
1.10 |
Preparatory work is checked to ensure no damage has occurred and complies with requirements. |
||
2 |
Install apparatus and associated equipment. |
2.1 |
OHS risk control measures and procedures for carrying out the work are followed. |
2.2 |
The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures. |
||
2.3 |
Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures. |
||
2.4 |
Apparatus and associated equipment are installed to comply with technical standards and job specifications and requirements with sufficient access to affect terminations, adjustment and maintenance. |
||
2.5 |
Wiring is terminated at apparatus and associated equipment in accordance with manufacture's specifications and functional and regulatory requirements. |
||
2.6 |
Established methods for dealing with unexpected situations are discussed with appropriate person or persons and documented. |
||
2.7 |
Unexpected situations are dealt with safely and with the approval of an authorised person. |
||
2.8 |
Ongoing checks of the quality of installed apparatus are undertaken in accordance with established procedures. |
||
2.9 |
Apparatus installation is carried out efficiently without unnecessary waste of materials or damage to apparatus, circuits, the surrounding environment or services and using sustainable energy principles. |
||
3 |
Completion and report installation activities. |
3.1 |
OHS work completion risk control measures and procedures are followed. |
3.2 |
Work site is cleaned and made safe in accordance with established procedures. |
||
3.3 |
Final checks are made to that the installed apparatus conforms to requirements. |
||
3.4 |
'As-installed' apparatus and associated equipment is documented and an appropriate person or persons notified in accordance with established procedures. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
||
7 ) This describes the essential skills and knowledge and their level, required for this unit. |
||
Evidence shall show that knowledge has been acquired of safe working practices and installing low voltage electrical apparatus and associated equipment. All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies. The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit. |
||
2.1.3 |
Cables in buildings, structures and premises |
|
2.1.5.1 |
Power cable and conductor terminations |
|
2.5.2.1 |
Technical standards, regulations and codes for electrical installations |
|
2.5.11 |
Environmental and heritage awareness |
|
2.6.6.2 |
Alternating current rotating machines |
|
2.6.8.2 |
Single and three phase transformers |
|
2.6.9.2 |
Luminaries and lighting systems |
|
2.7.1.2 |
Electrical installations, wiring and accessories |
|
2.7.1.3 |
Electrical wiring systems |
|
2.7.2 |
Electrical installations, equipment requirements |
|
2.18.2 |
Electrical Safe working practices |
Evidence Guide
EVIDENCE GUIDE |
||||
9 ) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package. |
||||
Overview of Assessment |
9 .1 ) Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy. Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed. The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment. Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package. |
|||
Critical aspects of evidence required to demonstrate competency in this unit |
9 .2 ) Before the critical aspects of evidence are considered all prerequisites shall be met. |
|||
Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:
|
||||
|
||||
|
||||
|
||||
A |
Reading and interpreting drawings related to and apparatus locations and circuit connections. |
|||
B |
Placing and securing apparatus accurately. |
|||
C |
Maintaining fire integrity. |
|||
D |
Terminating and connecting apparatus and associated equipment to comply with requirements. |
|||
E |
Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items. |
|||
Context of and specific resources for assessment |
9 .3 ) This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
These should be part of the formal learning/assessment environment. Note: Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy. |
|||
The resources used for assessment should reflect current industry practices in relation to installing low voltage electrical apparatus and associated equipment. |
||||
Method of assessment |
9 .4 ) This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'. Note: |
|||
Concurrent assessment and relationship with other units |
9 .5 ) |
|||
For optimisation of training and assessment effort, competency development in this unit may be arranged concurrently with unit: |
||||
UEENEEE007B |
Use drawings, diagrams, schedules and manuals |
|||
UEENEEG003B |
Install wiring and accessories for low voltage circuits |
|||
The critical aspects of occupational health and safety covered in unit UEENEEE001B and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.. |
Range Statement
RANGE STATEMENT |
|
8 ) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance. |
|
This unit shall be demonstrated in relation to at least four different electrical apparatus and associated equipment. |
|
Note: |
|
Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1. |
Unit Sector(s)
Not Applicable
Competency Field
2 .2 ) Literacy and numeracy skills Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy' |
|||||
Reading |
4 |
Writing |
4 |
Numeracy |
4 |
2.2) Literacy and numeracy skills
Competency Field |
5 ) |
Electrical |