Modification History
Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package This qualification replaces and is not equivalent to UEE50720 Diploma of Renewable Energy Engineering. Modifications include:
|
Qualification Description
This qualification provides competencies to design renewable energy systems; supervise installation and maintenance; and develop, select, commission, maintain and diagnose faults/malfunctions on large-scale renewable energy (RE) equipment and systems. There are skills and knowledge covered in this qualification that require a licence or permit to practice. |
Entry Requirements
The entry requirement for this qualification is:
or
|
Packaging Rules
A total of 760 weighting points comprising: 310 core weighting points ; plus 450 elective weighting points Choose a minimum of 430 elective weighting points units from the list below, of which:
Up to 200 weighting points of the elective units Group D, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided that selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with. |
||
Core units |
Weighting Points |
|
UEECD0010 |
Compile and produce an energy sector detailed report |
60 |
UEECD0024 |
Implement and monitor energy sector WHS policies and procedures |
20 |
UEECD0062 |
Write specifications for renewable energy engineering projects |
40 |
UEERE0049 |
Apply safe work practices in the rooftop solar industry |
20 |
UEERE0054 |
Conduct site survey for grid-connected photovoltaic and battery storage systems |
30 |
UEERE0055 |
Conduct site survey for off-grid photovoltaic/generating systems |
40 |
UEERE0056 |
Coordinate maintenance of renewable energy (RE) apparatus and systems* |
20 |
UEERE0078 |
Install battery storage to power conversion equipment * |
30 |
UEERE0081 |
Install photovoltaic systems to power conversion equipment * |
30 |
UEERE0082 |
Maintain renewable energy (RE) apparatus * |
20 |
Group A Elective units |
Weighting Points |
|
UEEEL0047 |
Identify, shut down and restart systems with alternate supplies* |
20 |
UEERE0050 |
Identify and isolate multiple supply systems * |
20 |
Group B Elective units |
Weighting Points |
|
UEERE0057 |
Coordinate the design of micro-grid renewable energy systems |
50 |
UEERE0058 |
Coordinate the installation, fault finding and repair of micro grid systems |
40 |
UEERE0060 |
Design grid-connected battery storage systems * |
40 |
UEERE0061 |
Design grid-connected photovoltaic power supply systems * |
40 |
UEERE0062 |
Design micro-hydro systems * |
40 |
UEERE0063 |
Design off-grid photovoltaic/generating set systems * |
40 |
UEERE0064 |
Design renewable energy heating systems * |
40 |
UEERE0065 |
Design wind energy systems * |
40 |
Group C Elective units |
Weighting Points |
|
CPPHES4005 |
Assess household energy use and efficiency improvements |
40 |
UEECO0013 |
Prepare specifications for the supply of materials and equipment for electrotechnology projects |
40 |
UEECO0014 |
Prepare tender submissions for electrotechnology projects* |
60 |
UEEEC0060 |
Repairs basic electronic apparatus faults by replacement of components* |
40 |
UEEEC0075 |
Troubleshoot single phase input d.c power supplies* |
40 |
UEEEL0011 |
Evaluate performance of low voltage electrical apparatus* |
40 |
UEEEL0040 |
Develop compliance policies and plans to conduct an electrical contracting business* |
80 |
UEEEL0078 |
Install and commission whole current electricity meters |
20 |
UEEIC0002 |
Assemble, enter and verify operating instructions in microprocessor equipped devices* |
20 |
UEEIC0013 |
Develop, enter and verify discrete control programs for programmable controllers* |
60 |
UEERE0052 |
Assess energy loads and uses for energy efficiency in commercial facilities* |
40 |
UEERE0053 |
Assess energy loads and uses for energy efficiency in industrial properties and enterprises* |
40 |
UEERE0068 |
Develop strategies to address sustainability issues for electrical installations |
20 |
UEERE0069 |
Diagnose and rectify faults in renewable energy (RE) control systems* |
60 |
UEERE0070 |
Fault find and repair grid-connected photovoltaic power supply systems * |
30 |
UEERE0071 |
Fault find and repair off-grid photovoltaic/generating set systems to an electrical installation * |
30 |
UEERE0075 |
Install and maintain micro hydro energy systems to power conversion equipment * |
30 |
UEERE0076 |
Install and maintain wind energy systems to power conversion equipment * |
30 |
UEERE0077 |
Install battery storage equipment power conversion equipment to grid * |
30 |
UEERE0079 |
Install off-grid power conversion equipment to electrical installation * |
30 |
UEERE0080 |
Install photovoltaic power conversion equipment to grid * |
30 |
Group D Elective units |
Weighting Points |
|
BSBINS501 |
Implement information and knowledge management systems |
50 |
BSBLDR522 |
Manage people performance |
70 |
BSBSTR501 |
Establish innovative work environments |
50 |
BSBSTR502 |
Facilitate continuous improvement |
60 |
BSBTWK502 |
Manage team effectiveness |
60 |
ICTICT214 |
Operate application software packages |
20 |
UEECD0030 |
Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software* |
60 |
UEECD0031 |
Prepare engineering drawings using manual drafting and CAD for electrotechnology applications* |
60 |
UEECD0032 |
Produce detailed electrotechnology/utilities drawings using CAD equipment and software* |
60 |
UEECO0001 |
Estimate electrotechnology projects |
40 |
UEECO0013 |
Prepare specifications for the supply of materials and equipment for electrotechnology projects |
40 |
UEECO0015 |
Provide quotations for installation or service jobs |
20 |
UEECO0017 |
Source and purchase material/parts for installation or service jobs |
20 |
UEECS0033 |
Use engineering applications software on personal computers |
40 |
UEERE0084 |
Manage renewable energy (RE) projects |
40 |
UEERE0085 |
Plan renewable energy (RE) projects |
60 |
Qualification Mapping Information
This qualification replaces and is not equivalent to UEE50720 Diploma of Renewable Energy Engineering |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6