Modification History
Release |
Action |
Core/Elective |
Details |
Points |
2 |
Update |
Group A |
HLTCPR211A Perform CPR |
10 |
2 |
Update |
Group A |
HLTFA311A Apply first aid |
10 |
2 |
Edit |
Edit Name to reflect correct Unit title UEENEED104A Use engineering applications software on personal computers |
40 |
|
2 |
Update |
Core |
CPPFES2043A Prevent ozone depleting substance and synthetic greenhouse gas emissions |
10 |
4 |
Update |
Elective |
HLTAID001 - Provide cardiopulmonary resuscitation |
10 |
4 |
Update |
Elective |
HLTAID003 - Provide first aid |
10 |
4 |
Edit |
Core |
Correct title of UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace |
20 |
4 |
Edit |
Core |
Correct title of UEENEEE102A - Fabricate, assemble and dismantle utilities industry components |
40 |
4 |
Edit |
Core |
Correct title of UEENEEE108A - Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits |
40 |
4 |
Edit |
Core |
Correct title of UEENEEH102A - Repairs basic electronic apparatus faults by replacement of components |
40 |
4 |
Edit |
Core |
Correct title of UEENEEH161A - Install fire detection and warning system apparatus |
40 |
4 |
Edit |
Core |
Correct title of UEENEEH162A - Verify compliance and functionality of fire protection system installations |
60 |
4 |
Edit |
Core |
Correct title of UEENEEH163A - Enter and verify programs for fire protection systems |
40 |
4 |
Edit |
Core |
Correct title of UEENEEK142A - Apply environmentally and sustainable procedures in the energy sector |
20 |
4 |
Edit |
Elective |
Correct title of UEENEED101A - Use computer applications relevant to a workplace |
20 |
4 |
Edit |
Elective |
Correct title of UEENEEH164A - Commission large fire protection systems |
40 |
4 |
Edit |
Elective |
Correct title of UEENEEH165A - Troubleshoot fire protection systems |
40 |
4 |
Edit |
Elective |
Correct title of UEENEEI116A - Assemble, enter and verify operating instructions in microprocessor equipped devices |
20 |
4 |
Edit |
Elective |
Correct title of UEENEEP013A - Disconnect - reconnect control devices connected to low voltage installation wiring |
60 |
Description
Scope
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain fire protection systems in multiple, commercial and industrial premises.
^ From 1 July 2022 the elective units HLTAID001, HLTAID003 must no longer be delivered and will be replaced in the Packaging Rules by the units HLTAID009, HLTAID011 - for more information see: https://asqa.gov.au/news-events/news/reminder-about-superseded-hlt-first-aid-units
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 370 points in accordance with the Elective Competency Standard Units table below.
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
UEENEEC022B |
Participate in fire protection control work and competency development activities |
60 |
UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
20 |
UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
40 |
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
UEENEEE108A |
Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits |
40 |
UEENEEE119A |
Solve problems in multiple path extra low voltage (ELV) a.c. circuits |
40 |
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
UEENEEF102A |
Install and maintain cabling for multiple access to telecommunication services |
120 |
UEENEEH102A |
Repairs basic electronic apparatus faults by replacement of components |
40 |
UEENEEH161A |
Install fire detection and warning system apparatus |
40 |
UEENEEH162A |
Verify compliance and functionality of fire protection system installations |
60 |
UEENEEH163A |
Enter and verify programs for fire protection systems |
40 |
UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
20 |
CPPFES2043A |
Prevent ozone depleting substance and synthetic greenhouse gas emissions |
10 |
Total points in core |
690 |
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 370 points from the following groups: |
|||
Group |
Minimum points |
Maximum points |
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
170 |
B |
Qualification Elective Units You may select all your elective units from this Group |
200 |
370 |
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 170 |
Weighting Points |
|
UEENEEC001B |
Maintain documentation |
20 |
UEENEEC002B |
Source and purchase material/parts for installation or service jobs |
20 |
UEENEEC003B |
Provide quotations for installation or service jobs |
20 |
UEENEEC010B |
Deliver a service to customers |
20 |
UEENEED101A |
Use computer applications relevant to a workplace |
20 |
UEENEEE009B |
Comply with scheduled and preventative maintenance program processes |
20 |
UEENEEE020B |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
CPCCOHS1001A |
Work safely in the construction industry |
10 |
HLTAID001 ^ HLTAID009 |
Provide cardiopulmonary resuscitation Provide cardiopulmonary resuscitation (must be delivered from 1 July 2022) |
10 |
HLTAID003 ^ HLTAID011 |
Provide first aid Provide First Aid (must be delivered from 1 July 2022) |
10 |
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 170 points |
|
Group B – Qualification Elective Units Complete units to a minimum weighting of 200 You may select all your elective units from this Group |
Weighting Points |
|
UEENEED104A |
Use engineering applications software on personal computers |
40 |
UEENEEF104A |
Install and modify performance data communication copper cabling |
40 |
UEENEEF105A |
Install and modify optical fibre performance data communication cabling |
40 |
UEENEEH111A |
Troubleshoot single phase input d.c. power supplies |
40 |
UEENEEH164A |
Commission large fire protection systems |
40 |
UEENEEH165A |
Troubleshoot fire protection systems |
40 |
UEENEEI116A |
Assemble, enter and verify operating instructions in microprocessor equipped devices |
20 |
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
UEENEEM024A |
Install explosion-protected equipment and wiring systems - gas atmospheres |
60 |
UEENEEM077A |
Install and maintain the integrity of fixed gas detection equipment |
20 |
UEENEEM080A |
Report on the integrity of explosion-protected equipment in a hazardous area |
20 |
UEENEEP013A |
Disconnect - reconnect control devices connected to low voltage installation wiring |
60 |
UEENEEP018A |
Locate and rectify faults in low voltage control devices using set procedures |
20 |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
END OF QUALIFICATION
Custom Content Section
Not applicable.