Unit of competency details

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Plan and prepare for solvent extraction

1.1. Access, interpret and apply compliance documentation  relevant to the work activity

1.2. Receive, interpret and clarify shift changeover details

1.3. Communicate with other personnel

1.4. Select personal protective equipment appropriate for work activities

1.5. Select appropriate type of auxiliary equipment 

1.6. Perform equipment pre -start checks 

1.7. Identify, address and report potential risks and hazards

1.8. Identify, address and report environmental issues 

1.9. Adhere to emergency procedures

1.10. Use dust suppression and extraction methods

1.11. Ensure area is well ventilated

2. Start-up equipment in sequence

2.1. Carry out start -up procedures  and completes start-up checks according to plant configurations and system requirements

2.2. Confirm plant  is operational

3. Operate and monitor equipment

3.1. Read  and interpret data from equipment indicators 

3.2. Continuously inspect operations/plant and containment areas for defects and potential problems

3.3. Adjust equipment to approved operating parameters

3.4. Add reagents to approved operating parameters

3.5. Carry out operator level maintenance

3.6. Complete all required documentation

3.7. Pass on end of shift information to incoming shift

4. Conduct housekeeping activities

4.1. Clean plant 

4.2. Identify, address and report hazards

5. Shutdown in sequence and/or isolate equipment

5.1. Shutdown or isolate equipment based on process and safety requirements

5.2. Perform post shutdown  or isolation checks

This section describes the skills and knowledge required for this unit.

Required skills 

Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to conduct solvent extraction:

• apply legislative, organisation and site requirements and procedures for conducting solvent extraction
• identify and manage hazards
• handle hazardous substances
• interpret reports
• apply lifting (manual, cranes and loads)
• maintain records
• report defects
• employ safe work practices
• fault finding
• use hand and power tools

Required knowledge 

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to conducting solvent extraction:

• breakdown procedures
• contaminant identification
• solvent extraction process
• emergency procedures
• environmental principles
• equipment operating parameters
• equipment safety requirements
• hazardous substance procedures and consequences of spills
• isolation procedures
• metallurgical and technical data
• operational procedures and checks
• pumping system and flow charts (pipeline and sprinkler systems)
• reagent types
• sampling
• solvent extraction safety requirements
• types of ores
• wet and dry working procedures

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

• knowledge of the requirements, procedures and instructions for conducting solvent extraction
• implementation of requirements, procedures and techniques for the safe, effective and efficient completion of solvent extraction
• working with others to undertake and complete the solvent extraction in a way that meets all of the required outcomes
• consistent timely completion of solvent extraction that safely, effectively and efficiently meets the required outcomes

Context of and specific resources for assessment 

• This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
• Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
• The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
• Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
• Aboriginal people and other people from a non English speaking background may have second language issues.
• Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment 

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

• written and/or oral assessment of the candidate's required knowledge
• observed, documented and/or first hand testimonial evidence of the candidate's:

• implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
• consistent achievement of required outcomes

• first hand testimonial evidence of the candidate's:

• working with others to undertake and complete the solvent extraction

Guidance information for assessment 

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation  may include:

• legislative, organisational and site requirements and procedures
• manufacturer's guidelines and specifications
• Australian standards
• Employment and workplace relations legislation
• Equal Employment Opportunity and Disability Discrimination legislation

Legislation  may include Acts and regulations dealing with:

• mining safety and health
• mine inspection
• OHS
• explosives

Auxiliary equipment  may be anything that is portable and mobile that is not part of the fixed infrastructure, and may include:

• compressors
• distribution control systems (DCS)
• feeders
• gantry cranes and attachments and other mobile equipment
• hand and power tools
• hoses

Pre-start checks  may include:

• availability of equipment (e.g. conveyor)
• detection of conditions that are unusual
• personnel availability
• job requirements
• levels
• walk through plant

Environmental issues  may include:

• drainage
• dust (dump)
• emissions
• flora and fauna
• hazardous chemicals
• noise
• recycling
• run-off
• spills
• waste management and disposal
• water quality

Start-up procedures  may include:

• cameras and monitors
• interlocks
• distribution control system
• flash vessels
• launders
• heat exchangers
• hydraulic system
• pumping system
• screen inspections
• scuttling pumps
• pipes and flanges
• drive belts
• valves
• vessels
• visual and audio warning devices and lights
• suppression systems

Plant  may include:

• heat exchanger
• burners
• lines
• gas train
• vessels
• conveyors
• valves

Indicator readings  may measure:

• flow
• current (e.g. agitators)
• density
• levels
• restrictions
• pressure
• speed (e.g. pumps)
• unusual noises
• vibrations
• power
• temperature

Equipment and plant cleaning methods  may include:

• hosing with water
• high pressure cleaning

Monitoring the drying process  may include the checking of:

• blockages and spillages
• feed rates
• mineral content
• moisture levels
• on stream analysis (OSA)
• overloads
• pressures
• power draw
• temperature
• wear and tear
• emissions (e.g. cyanide)
• levels
• laboratory results

Post-shutdown checks  are like pre-start checks

The methods used to optimise the plant  may include:

• quantity of reagents
• flow
• temperature
• pressure
• A/C ratio
• condensate quality

Materials  may include:

• slurry
• steam

Contaminants  are anything other than the ore. Common contaminants may include:

• oil
• fuel
• gases
• organic materials
• moisture