Unit of competency details
RIINHB309E - Conduct guided boring (Release 1)
Summary
Usage recommendation:
Current
Releases:
| 1 1 (this release) |
14/Dec/2015 |
Companion volumes:
Unit of competency
Assessment requirements
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 030303 | Mining Engineering | 29/Apr/2016 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIINHB309D Conduct guided boring. Civil construction added to application and unit sector. Mapping table added.
|
Application
This unit describes a participant’s skills and knowledge required to conduct guided boring in the drilling and civil construction sectors.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of this unit.
Unit Sector
Civil construction
Drilling
Elements and Performance Criteria
|
1. Plan and prepare for guided boring
|
1.1 Access, interpret and apply guided boring documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select and wear personal protective equipment appropriate for work activities
1.5 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
1.6 Communicate and coordinate activities with others throughout the work activity
|
|
2. Bore pilot hole
|
2.1 Carry out pre-start and start up procedures
2.2 Identify, select and apply rig operational controls
2.3 Fit locating device to drill head and attach drill head to drill stem
2.4 Align drilling head with survey tool and survey control system
2.5 Drill pilot hole according to design alignment
2.6 Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
2.7 Add drill stem sections as required
2.8 Steer, and where required, zone steer drill head to achieve required pitch and direction
2.9 Monitor and interpret all gauge/dial readings
2.10 Monitor and interpret drill fluid return and drill spoil
2.11 Monitor and interpret drill head position and pitch
2.12 Maintain communication with all relevant personnel
2.13 Maintain drill log and reports as required
|
|
3. Complete back reaming, and product pull back
|
3.1 Lock out machine
3.2 Remove drill head
3.3 Check free rotation of swivel
3.4 Connect appropriate back reamer, swivel and product
3.5 Locate product feed to prevent damage and within breakover limitations
3.6 Check all safety precautions are in place and restart machine
3.7 Back reaming/pre-ream, and install product, removing drill stem sections
3.8 Monitor and interpret all gauge/dial readings
3.9 Monitor and interpret drill fluid flow from both ends of hole
3.10 Monitor product feed
3.11 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
3.12 Take required actions to achieve satisfactory product installation as required
3.13 Maintain drill log and reports as required
|
|
4. Respond to problems
|
4.1 Identify possible problems in equipment or process
4.2 Determine problems needing action
4.3 Determine possible fault causes
4.4 Rectify problem using appropriate solution within area of responsibility
4.5 Follow through items initiated until final resolution has occurred
4.6 Report problems outside area of responsibility to designated person
|
|
5. Complete equipment maintenance and housekeeping
|
5.1 Carry out shutdown and secure equipment
5.2 Monitor wear on drill stem, particularly threads
5.3 Dress damaged threads or replace drill stem as required
5.4 Check all equipment and hoses
5.5 Monitor wear on drill heads and reamers and take required action
5.6 Clean all equipment upon completion of bore, ensuring environmental controls are followed
5.7 Rotate drill stems in stack
5.8 Ensure drill fluid is appropriately contained/disposed of
5.9 Ensure maintenance schedules are followed
5.10 Ensure housekeeping activities are completed
5.11 Process records
|
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Unit Mapping Information
Code and title
current version
|
Code and title
previous version
|
Comments
|
Equivalence status
|
|
RIINHB309E Conduct guided boring
|
RIINHB309D Conduct guided boring
|
Application and unit sector amended to include Civil Construction.
|
Equivalent
|
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
Assessment requirements
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIINHB309D Conduct guided boring. Civil construction added to application and unit sector. Mapping table added.
|
Performance Evidence
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
- locates and applies relevant documentation, policies and procedures
- implements the requirements, procedures and techniques for the safe, effective and efficient completion of guided boring including:
- interpreting geological and survey data
- conducting mechanical and manual handling
- understanding the metric and imperial units conversion
- using mathematical calculations, addition, subtraction, multiplication and division
- using a calculator to calculate hole volume
- works effectively with others to undertake and complete the conduct of guided bores that meets all of the required outcomes including:
- complying with written and verbal reporting requirements and procedures
- communicating clearly and concisely with others to receive and clarify work instructions
- communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities
- demonstrates completion of guided bores that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
- fitting and locating device to drill head and attaching drill head to drill stem
- aligning drill head with survey tool and survey control system
- drilling pilot hole according to design alignment
- monitoring drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
- steering, and where required, zone steering drill head to achieve required pitch and direction
- monitoring and interpreting all gauge/dial readings
- monitoring and interpreting drill head position and pitch
- completing back reaming, and product pull back
Knowledge Evidence
The candidate must demonstrate knowledge of the following when conducting guided boring:
- organisation and site requirements and procedures for;
- work, health and safety
- environmental issues
- operating drill rig
- housekeeping
- worksite coordination requirements and procedures
- site operating techniques and systems
- systems and alarms requirements and procedures
- ground preparation requirements and procedures
- inspection, fault finding and reporting requirements and procedures
- routine operator servicing, maintenance and housekeeping requirements and procedures
- dust suppression techniques
- drill system characteristics, technical capability and limitations
- diagrams, plans and instructions for positioning, recording work or progress
- preparation for fire/accident/emergency
Assessment Conditions
- Assessors must satisfy the Standards for Registered Training Organisations (RTOs) 2015/AQTF mandatory competency requirements for assessors; and industry regulations for certification and licensing; and,
- this unit must be assessed in the context of this sector’s work environment; and,
- this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
- assessment may be conducted in conjunction with the assessment of other units of competency; and,
- assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
- assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this unit of competency, and through the minimum years of current* work experience specified below in an industry sector relevant to the outcomes of the unit; or,
- where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an industry subject matter expert. The industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the industry sector, including time spent in roles related to the unit being assessed; and,
- assessor and industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or industry sector as follows:
Industry sector
|
AQF** Level
|
Required assessor or industry subject matter expert experience
|
|
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction
|
1
|
1 Year
|
|
2
|
2 Years
|
|
Drilling, Coal Mining and Extractive (Quarrying)
|
3-6
|
3 Years
|
|
Metalliferous Mining and Civil Construction
|
3-6
|
5 Years
|
|
Other sectors
|
Where this unit is being assessed outside of the Resources and Infrastructure Sectors, assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and, where no industry standard is specified, should comply with any relevant regulation.
|
*Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered to indicate the AQF level.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
