Unit of competency

Modification History

Release 1. Supersedes and is equivalent to PMAOPS231B Control gas odourisation

Application

This unit of competency covers the skills and knowledge required to control gas odourisation and related processes.

This unit of competency applies to operators who are required to store and handle odourants, monitor the daily inventory of the odourising agent, monitor and operate the injection pumps, identify and rectify operational problems, and respond to abnormal situations.

The operator will be familiar with the physical and chemical properties of the product and understand all the safety issues set down in the safety data sheet (SDS) associated with this chemical.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Pre-requisite Unit

Nil

Competency Field

Operations

Unit Sector

Elements and Performance Criteria

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range of Conditions

Unit Mapping Information

Release 1. Supersedes and is equivalent to PMAOPS231B Control gas odourisation

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=9fc2cf53-e570-4e9f-ad6a-b228ffdb6875

Assessment requirements

Modification History

Release 1. Supersedes and is equivalent to PMAOPS231B Control gas odourisation

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include the ability to:

• start up, monitor and adjust injection pumps to maintain odour to specifications
• store, handle, transfer and dispose of odourant waste in accordance with regulatory requirements and safety data sheets (SDS)
• apply shutdown and emergency procedures
• recognise and take specified action on early warning signs of equipment/processes needing attention or with potential problems
• isolate and de-isolate equipment
• identify hazards and apply hazard control procedures
• distinguish between causes of problems/alarm/fault indications, including:

• process gas variations
• instrument failure/wrong readings
• electrical failures
• mechanical failures
• operational problems.

Knowledge Evidence

Evidence must be provided that demonstrates knowledge of:

• gas odourisation systems and their component functions
• principles of operation of plant/equipment
• physics and chemistry relevant to the process unit and the materials processed
• nature/condition of materials entering and leaving each stage of the process
• process parameters and limits, e.g. temperature, pressure and flow
• routine problems, faults, their symptoms and resolution
• correct methods of starting, stopping, operating and controlling process
• hazards that may arise in the job/work environment, and:

• their possible causes
• potential consequences
• appropriate risk controls.

Assessment Conditions

• The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the evidence.
• The collection of performance evidence:

• should occur over a range of situations which include typical disruptions to normal, smooth operation of an operating plant
• will typically include a supervisor/third-party report or other evidence, focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency
• must include the use of an appropriate industrial item of equipment requiring demonstration of operation, start-up and shutdown procedures and responding to problems
• may use industry-based simulation for part only of the unit where safety, lack of opportunity or significant cost is an issue.

• Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
• Assessment in a simulated environment should use evidence collected from one or more of:

• walk-throughs
• pilot plant operation
• demonstration of skills
• industry-based case studies/scenarios
• ‘what ifs’.

• Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept).
• Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
• Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
• The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
• Foundation skills are integral to competent performance of the unit and should not be assessed separately.
• Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
• In addition, the assessor or anyone acting in subject matter expert role in assessment must demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they must assess with a subject matter expert who does meet these requirements.
• Technical competence can be demonstrated through one or more of:

• relevant VET or other qualification/Statement of Attainment
• appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions
• appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions

• Currency can be demonstrated through one or more of:

• being currently employed undertaking the type of work being assessed
• being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures
• having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment
• conducting on-the-job training/assessments of the type of work being assessed
• being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=9fc2cf53-e570-4e9f-ad6a-b228ffdb6875