Modification History
Release 5. Six elective units updated and one deleted. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 4).
Release 4. Nine Elective units updated. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 3).
Release 3. One Elective unit updated. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 2).
Release 2. Listed prerequisites adjusted to match corrected units. Equivalent.
Release 1. Supersedes and is equivalent to LMT30607 Certificate III in Millinery.
Qualification Description
This qualification is intended for those who apply a range of technical skills within a millinery production environment.
No occupational licensing or certification requirements exist at the time of publication.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To be awarded the MST30316 Certificate III in Millinery, competency must be achieved in nineteen (19) units of competency:
- nine (9) core units of competency
- ten (10) elective units of competency.
Note : Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification.
Core units of competency
Select all nine (9) units of competency from the following list:
|
Unit code |
Unit title |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
MSMWHS200 |
Work safely |
|
MSMSUP102 |
Communicate in the workplace |
|
MSS402051 |
Apply quality standards |
|
MSTML2001 |
Identify materials used in millinery |
|
MSTML2002 |
Make flat patterns for millinery |
|
MSTML2007 |
Block and shape millinery by hand |
|
MSTML2008 |
Assemble simple blocked millinery components |
|
MSTML3004 |
Identify performance and handling requirements of millinery materials |
Elective units of competency
Select ten (10) units as specified below:
- A minimum of one (1) unit must be chosen from Group A
- The remaining seven (9) units may be selected from:
- units not previously selected from Group A
- units from Group B
- a maximum of three (3) relevant units from this Training Package, other endorsed Training Packages and accredited courses, where those units are available at Certificate II level (maximum 1 unit ), Certificate III level or Certificate IV level (maximum 1 unit ).
Units selected from other Training Packages and accredited courses must be relevant to the qualification outcome and not duplicate units available within this qualification.
|
Group A |
||
|
Unit code |
Unit title |
Prerequisites |
|
MSTGN3020 |
Market textile products to local outlets |
|
|
MSTGN3014 |
Organise and plan own work to achieve planned outcomes |
|
|
MSTGN3023 |
Estimate and cost job |
|
|
MSTGN3025 |
Draw 3-D designs |
|
|
MSTML3001 |
Make flat patterns from hat blocks |
MSTML2002 Make flat patterns for millinery MSTML2007 Block and shape millinery by hand MSTFD2006 Make millinery with flat pattern components |
|
MSTML3002 |
Block and shape complex millinery |
MSTML2007 Block and shape millinery by hand MSTML3004 Identify performance and handling requirements of millinery materials |
|
MSTML3003 |
Make millinery using a pattern derived from a hat block |
MSTML2005 Place and cut millinery patterns MSTML3001 Make flat patterns from hat blocks |
|
MSTML3005 |
Assemble complex blocked millinery components |
MSTML3002 Block and shape complex millinery |
|
Group B |
||
|
Unit code |
Unit title |
Prerequisites |
|
MSMSUP106 |
Work in a team |
|
|
MSTAT2007 |
Use specialised machinery to support apparel and textile production |
|
|
MSTAT3010 |
Perform garment repairs and alterations |
|
|
MSTAT2002 |
Draw basic sketches of textile products |
|
|
MSTAT2005 |
Sew materials by machine |
|
|
MSTGN2016 |
Use steaming and pressing equipment in TCF production |
|
|
MSTGN2017 |
Prepare, finish and package products for storage or dispatch |
|
|
MSTGN2018 |
Work in the TCF industry |
|
|
MSTGN2020 |
Perform test or inspection to check product quality |
|
|
MSTGN2024 |
Perform minor maintenance |
|
|
MSTGN3009 |
Coordinate work of team or section |
|
|
MSTGN2022 |
Perform tasks to support production |
|
|
MSTGN3012 |
Work safely with chemicals in TCF operations |
|
|
MSTGN2014 |
Operate computing technology in a TCF workplace |
|
|
MSTML2003 |
Produce and attach millinery trims |
|
|
MSTML2004 |
Produce felt for millinery |
|
|
MSTML2005 |
Place and cut millinery patterns |
|
|
MSTML2006 |
Make millinery with flat pattern components |
|
|
MSTML2009 |
Apply millinery sewing and adhesion techniques |
|
Qualification Mapping Information
Release 5. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 4).
Release 4. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 3).
Release 3. Supersedes and is equivalent to MST30316 Certificate III in Millinery (Release 2).
Release 2. Listed prerequisites adjusted to match corrected units. Equivalent.
Release 1. Supersedes and is equivalent to LMT30607 Certificate III in Millinery.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a203ec5c-de7d-406b-b3e1-8f1a9b76e92e
