Unit of competency
Modification History
Release 1. Supersedes and is equivalent to MSMRV323 Fit required internal items to a recreational vehicle. Changes to application, elements, performance criteria and assessment requirements. Range of conditions removed.
Application
This unit describes the skills and knowledge required to complete the internal fit-out in recreational vehicles. Internal fit-out items include appliances (such as TVs, fridges, microwaves and washing machines) and other internal items (such as internal antennae; beds and bed fittings, struts and heads; curtain runners, curtain holders and curtains; door blinds; dining tables; drawers; fire extinguishers; hatch surrounds and covers; handles; headboards; ladders; latches; mattresses; overhead, kitchen, wardrobe and other cupboard shelves, doors and fittings; rails; seats, seat backs and cushions; shower/toilet doors and fittings; sliding/concertina doors; TV brackets; and wardrobe shelves, doors, hangers and fittings). The unit does not address the fit-off of extra-low-voltage electrical systems, which MSMRV373 Rough-in and fit-off recreational vehicle extra-low-voltage electrical systems addresses. The unit does also not address the fit-off of water systems, which MSMRV372 Rough-in and fit-off recreational vehicle water systems addresses.
The unit applies to a person working in a recreational vehicle manufacturing facility who undertakes routine tasks according to job instructions, plans/specifications and procedures and uses discretion and judgement in selecting equipment, services and contingency measures. They work with a high degree of self-direction and limited supervision. They apply known solutions to routine problems and report non-routine problems according to procedures. They are responsible for their output and have limited responsibility for the output of others.
No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Pre-requisite Unit
None
Elements and Performance Criteria
|
Elements |
Performance Criteria |
|
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
|
1. Prepare to complete internal fit-out |
1.1 Identify requirements to complete the internal fit-out from job instructions and manufacturer’s instructions 1.2 Select and check all required tools and equipment are ready to use 1.3 Gather fit-out and other items required by job specifications, and check they meet quality requirements and are ready for installation 1.4 Identify hazards and hazard controls and check the hazard controls are in place and operating 1.5 Check the recreational vehicle, carcasses, other furniture and the work area are ready for installing the fit-out items 1.6 Seal wall and furniture joins according to workplace procedures |
|
2. Install fit-out items |
2.1 Determine, measure and mark the correct positions of brackets and fit-out items according to the manufacturer’s instructions and job instructions 2.2 Fasten in position and complete installing the fit-out items according to the manufacturer’s instructions and workplace procedures 2.3 Check the fit-out items are installed, functioning correctly and clean according to quality requirements and rectify any deficiencies |
|
3. Complete the fit-out according to workplace procedures |
3.1 Clean up the recreational vehicle in readiness for the next task 3.2 Clean up the work area, identify items for recycling and dispose of waste 3.3 Identify, tag and report any damage to equipment and tools 3.4 Check, clean and do routine maintenance on equipment and tools and store them and unused materials 3.5 Complete task outcome documentation |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Unit Mapping Information
Supersedes and is equivalent to MSMRV323 Fit required internal items to a recreational vehicle.
Links
Companion volume implementation guides are found in VETNet – - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027
