Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify work requirements

1.1

Work requirements, including materials, types of cuts and quantities required, are identified from work instructions or job order in accordance with workplace procedures

1.2

Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Cutting list and quality standards are determined and procedures identified in accordance with workplace requirements

1.5

Glazing material to be cut is selected using information from the work order, including type, thickness, colour and dimensions

1.6

Machines, equipment and settings required to perform the work are identified

2

Prepare for work

2.1

Sequence of work is planned to ensure cutting is conducted in a logical order

2.2

Suitable cutting and lubrication methods are selected

2.3

Cutting table is selected and work surface is cleared of debris and dust

2.4

Work area is cleared of obstructions and potential hazards

2.5

Glazing material is checked for imperfections and damage prior to handling

2.6

Glazing material to be processed is located in the work area using correct manual handling procedures and any specialised handling techniques and precautions, observing any labelling instructions

2.7

Glazing material is measured accurately to minimise waste and within specified tolerances according to workplace standards

2.8

Components and controls of machines, including emergency stops and guards, are identified and tested for working order

3

Cut glazing materials

3.1

Tools and equipment are operated and monitored in accordance with manufacturer instructions and workplace procedures to ensure correct product quality and output

3.2

Glazing material is processed to required standard in accordance with job order, work instructions and procedures, including the performance of routine lubrication and adjustments of machines/equipment

3.3

Problems occurring during work operations are identified and reported to appropriate persons

3.4

Authorised changes in working procedures are followed

4

Complete work

4.1

Completed product is inspected for quality of work and repaired, reprocessed or discarded in accordance with workplace procedures

4.2

Cut glazing material is labelled and stored following workplace procedures

4.3

Scraps and off-cuts are removed for disposal/recycling as required

4.4

Work area is cleaned and rubbish disposed of as appropriate

4.5

Workplace documentation is completed as required

4.6

Tools, equipment and unused materials are removed and stored appropriately

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes: 

• WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent
• work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
• work requires individuals to demonstrate some discretion, judgement and problem solving

Glazing materials include: 

• plain sheet glass
• speciality glass
• non-glare glass
• UV clear glass
• UV non-glare glass
• sheet acrylic
• conservation acrylic
• mirrors

Tools and equipment include: 

• flat felt-covered cutting tables
• tungsten wheel glass cutters
• wall-mounted glass cutters
• saws
• scoring tools
• speed cutters
• T-squares or L-squares
• tape measures
• marking pens or chinagraph pencils
• templates
• lubricants

Personal protective equipment includes: 

• that prescribed under legislation, regulations and enterprise policies:

• gloves
• safety glasses
• safety footwear
• aprons and overalls

Information and procedures include: 

• workplace procedures relating to the use of tools and equipment
• work instructions, including job sheets, cutting lists, plans, drawings and designs
• workplace procedures relating to reporting and communication
• manufacturer specifications and operational procedures