Unit of competency
Modification History
Release 1 - New unit of competency
Application
This unit of competency covers applying brushable coatings to surfaces by hand.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Pre-requisite Unit
Competency Field
Unit Sector
Furniture finishing
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
||
1 |
Prepare for work |
1.1 |
Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices |
1.2 |
Characteristics of the surface and the required surface finish are identified from work orders or instructions |
||
1.3 |
Processing and application techniques, time and safety requirements are identified and used for work planning |
||
1.4 |
Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work |
||
1.5 |
Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task |
||
2 |
Prepare for application of materials |
2.1 |
Surfaces are checked for contamination and correct preparation according to workplace procedures and standards |
2.2 |
Products with surface or other faults are identified and faults repaired as appropriate |
||
2.3 |
Finishing materials required are identified and prepared for the task |
||
2.4 |
Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish |
||
2.5 |
Faults are identified and workplace procedures for rectification are followed |
||
3 |
Apply finishing materials |
3.1 |
Techniques for hand application of materials are identified |
3.2 |
Finishing materials are applied according to job instructions, material manufacturer specifications and workplace procedures |
||
3.3 |
Finished products are inspected and approved for suitability for further processing |
||
3.4 |
Products which do not meet quality specifications are refinished or tagged for further investigation |
||
4 |
Clean work area and maintain equipment |
4.1 |
Equipment used is cleaned and inspected for serviceable condition and stored appropriately |
4.2 |
Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed |
||
4.3 |
Work area is cleaned and returned to approved condition |
||
4.4 |
Workplace records are completed |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. Detail on appropriate performance levels for each furnishing unit of competency in reading, writing, oral communication and numeracy utilising the Australian Core Skills Framework (ACSF) are provided in the Furnishing Training Package Implementation Guide.
Range of Conditions
Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment. |
|
Unit context includes: |
|
Coatings include: |
|
Application methods include: |
|
Surfaces include: |
|
Tools and equipment include: |
|
Materials include: |
|
Personal protective equipment includes: |
|
Information and procedures include: |
|
Unit Mapping Information
Supersedes and is equivalent to LMFFF2008B Apply surface coatings by hand
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73