Qualification details

MSF31113 - Certificate III in Cabinet Making (Release 5)

Summary

Releases:
ReleaseStatusRelease date
5 (this release)Current 12/Jul/2016
(View details for release 4) Replaced04/Mar/2016
(View details for release 3) Replaced10/Sep/2015
(View details for release 2) Replaced17/Mar/2014
(View details for release 1) Replaced10/Dec/2013

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to LMF32109 - Certificate III in Cabinet Making 09/Dec/2013


Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
BSBCUS301 - Deliver and monitor a service to customersDeliver and monitor a service to customers Elective
CPCCOHS1001A - Work safely in the construction industryWork safely in the construction industry N/A
CUAACD302 - Produce computer-aided drawingsProduce computer-aided drawings Elective
MSFFF2004 - Prepare surfaces for finishingPrepare surfaces for finishing N/A
MSFFF2006 - Apply surface coatings by spray gunApply surface coatings by spray gun N/A
MSFFM2001 - Use furniture making sector hand and power toolsUse furniture making sector hand and power tools N/A
MSFFM2002 - Assemble furnishing componentsAssemble furnishing components N/A
MSFFM2003 - Select and apply hardwareSelect and apply hardware N/A
MSFFM2005 - Join solid timberJoin solid timber N/A
MSFFM2006 - Hand make timber jointsHand make timber joints N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 72

Classifications

SchemeCodeClassification value
ANZSCO Identifier 394111 Cabinetmaker 
ASCO (occupation type) Identifier 4922-11 Cabinetmaker 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 394111 Cabinetmaker 02/May/2014 
ASCO (occupation type) Identifier 4922-11 Cabinetmaker 02/May/2014 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 02/May/2014 
Qualification/Course Level of Education Identifier 514 Certificate III 10/Dec/2013 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 5 – Group A and Group E selection corrected. Imported units updated. Equivalent.Release 4 - Imported units updated. Equivalent.

Release 3 - Packaging for pathways clarified and choice for Group A corrected. No changes to packaging rules.

Release 2 - One unit title corrected for MSFFM3010. No change in outcomes.

Release 1 - New qualification

Qualification Description

This qualification covers the skills and knowledge required to perform a range of skills at trade-level for those working in furniture making and those involved in the manufacture and installation of fitted furniture typically in a kitchen, bathroom and related context. Installation skills may be applied to new or renovation work. The work is in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.

This qualification offers a generic Certificate III in Cabinet Making, as well as two pathways targeting the skill requirements of free-standing furniture makers and kitchen and bathroom cabinet makers and installers.

The following additional qualification descriptors are approved for this qualification:

Pathway 1: 

MSF31113 Certificate III in Cabinet Making

(Furniture)

Pathway 2:  

MSF31113 Certificate III in Cabinet Making

(Kitchens and Bathrooms)

The MSS30312 Certificate III in Competitive Systems and Practices is available for employees at this level who already possess technical skills and who require additional manufacturing practice skills above those available in this qualification.

Depending on the state and territory where work is undertaken licensing may relate to this qualification where the candidate is required to work on-site assisting in kitchen and bathroom installation. The licensing requirement will usually involve construction induction training. Where licensing is required the unit CPCCOHS1001A Work safely in the construction industry should be selected. If no licensing requirement exists e.g. where all work will be off-site then the unit MSAPMOHS200A Work safely should be selected.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MSF31113 Certificate III in Cabinet Making, competency must be achieved in twenty-eight (28)  units of competency.

  • six (6)  core units of competency
  • twenty-two (22)  elective units of competency.

Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.

CORE UNITS  

Complete all six (6)  units from this list.

Unit code 

Unit title 

MSMENV272

Participate in environmentally sustainable work practices

MSMSUP102

Communicate in the workplace

MSMSUP106

Work in a team

MSFFM2001

Use furniture making hand and power tools

MSFGN2001

Make measurements and calculations

MSFGN3001

Read and interpret work documents

ELECTIVE UNITS  

Select twenty-two (22)  units from Groups A to F as specified below.

Generic qualification 

  • one (1)  unit from Group A
  • a minimum of eight (8)  units in any combination from Groups B, C or D
  • a minimum of eight (8)  units from Group E

Pathway 1 – Furniture 

  • one (1)  unit from Group A
  • a minimum of eight (8)  units from groups B or D
  • a minimum of eight (8)  units from Group E

Pathway 2 – Kitchens and Bathrooms 

  • one (1)  unit from Group A
  • a minimum of eight (8)  units from Groups C or D
  • and a minimum of eight (8)  units from Group E

The balance of units (up to 5) can be chosen from Group F, or from Groups B, C or D.

Group A 

Unit code 

Unit title 

CPCCOHS1001A

Work safely in the construction industry

OR

MSMWHS200

Work safely

Group B  

Unit code 

Unit title 

MSFFF2004

Prepare surfaces for finishing

MSFFM2002

Assemble furnishing components

MSFFM2005

Join solid timber

MSFFM2006

Hand make timber joints

MSFFM3002

Construct furniture using leg and rail method

MSFFM3005

Fabricate custom furniture

MSFFM3006

Install furnishing products

Group C  

Unit code 

Unit title 

MSFKB2001

Prepare for cabinet installation

MSFKB3001

Identify processes in kitchen and bathroom projects

MSFKB3002

Determine requirements for installation of cabinets

MSFKB3003

Check and measure fit of cabinets

MSFKB3004

Conduct on-site adjustments to cabinets and components

MSFKB3005

Fabricate cabinets for the built-in environment

MSFKB3006

Install fitted cabinets and components

Group D 

Unit code 

Unit title 

BSBCUS301

Deliver and monitor a service to customers

MSFFM2003

Select and apply hardware

MSFFM2010

Set up, operate and maintain basic static machines

MSFFM2011

Apply manufactured board conversion techniques

MSFFM3010

Prepare cutting list from plans and job specifications

MSFFM3021

Set up, operate and maintain computer numerically controlled (CNC) sizing machines

MSFFM3022

Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres

MSFGN3002

Estimate and cost job

MSS402030

Apply cost factors to work practices

Group E 

Unit code 

Unit title 

CUAACD302

Produce computer-aided drawings

MSMOPS363

Organise on-site work

MSMPER200

Work in accordance with an issued permit

MSMSUP390

Use structured problem solving tools

MSFFF2006

Apply surface coatings by spray gun

MSFFM2012

Set up, operate and maintain pressure and clamping machines

MSFFM3001

Construct chair and couch frames

MSFFM3003

Produce angled and curved furniture using manufactured board

MSFFM3004

Produce angled and curved furniture using solid timber

MSFFM3007

Prepare and apply decorative surfaces for furniture

MSFFM3008

Select timbers for furniture production

MSFFM3009

Produce manual and computer-aided production drawings

MSFFM3011

Measure and draw site layout for manufactured furniture products

MSFFM3012

Set up, operate and maintain sawing machines

MSFFM3013

Set up, operate and maintain drilling machines

MSFFM3014

Set up, operate and maintain joining machines

MSFFM3015

Set up, operate and maintain planing and finishing machines

MSFFM3016

Set up, operate and maintain multi-head planing and moulding machines

MSFFM3017

Set up, operate and maintain routing and shaping machines

MSFFM3018

Set up, operate and maintain mechanical wood-turning lathes

MSFFM3019

Set up, operate and maintain automated edge banding machines

MSFFM3020

Fabricate synthetic solid surface products

MSFFM3023

Produce and maintain cutting tools

MSFFM3024

Construct jigs and fixtures

MSFFT4001

Coordinate on-site installation of furnishing products

MSFFT4007

Sample, inspect and test products to specifications

MSFFT4008

Interpret and use workplace information

MSFFT4009

Match furnishing style and materials to customer requirements

MSS402001

Apply competitive manufacturing practices

MSS402002

Sustain process improvements

MSS402010

Manage the impact of change on own work

MSS402020

Apply quick changeover procedures

MSS402021

Apply Just in Time procedures

MSS402040

Apply 5S procedures

MSS402050

Monitor process capability

MSS402051

Apply quality standards

MSS402060

Use planning software systems in operations

MSS402061

Use SCADA systems in operations

MSS402080

Undertake root cause analysis

MSS402081

Contribute to the application of a proactive maintenance strategy

TLID2003

Handle dangerous goods/hazardous substances

Group F  

Up to five (5)  relevant units may be chosen from units not already selected from Groups B to E, or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 5 units) or Certificate IV level (maximum 1 unit).

Units selected from other Training Packages and accredited courses via Group F must be relevant to the qualification outcome and not duplicate units available within this qualification.

Qualification Mapping Information

Release 5 – Group A and Group E selection corrected. Imported units updated. Equivalent.Release 4 - Imported units updated. Equivalent.

Release 3 - Packaging for pathways clarified and choice for Group A corrected. No changes to packaging rules.

Release 2 - One unit title corrected for MSFFM3010. No change in outcomes.

Release 1 - New qualification

Release 1. New qualification. Supersedes and is based on LMF32109 Certificate III in Cabinet Making. Outcomes are equivalent.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.