Modification History
Release 1 - New qualification
Qualification Description
This qualification describes the skills and knowledge required to perform basic furnishing industry tasks used in a range of industry job roles involving known routines and procedures and some accountability for the quality of outcomes.
This qualification is typically used to develop skills and knowledge in basic furnishing techniques that include employment-related skills, including preparatory access and participation skills, broad-based induction skills and/or specific workplace skills. It involves collaboration with others through members of a group or team.
Meaningful involvement of industry is essential to achieving this qualification outcome and workplace visits and placement to ensure exposure of learners to realistic workplace conditions and employer expectations is required.
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Entry Requirements
Not applicable
Packaging Rules
To be awarded the MSF20113 Certificate II in Furnishing, competency must be achieved in fourteen (14) units of competency.
- five (5) core units of competency
- nine (9) elective units of competency.
Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.
CORE UNITS
Complete all five (5) units from this list:
|
Unit code |
Unit title |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
MSAPMOHS200A |
Work safely |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
|
MSFGN2001 |
Make measurements and calculations |
ELECTIVE UNITS
Select up to nine (9) elective units from Groups A and B as specified below.
Group A
Security screens and grilles
|
Unit code |
Unit title |
|
MSFBA2001 |
Use blinds, awnings, security screens and grilles hand and power tools |
|
MSFFM2010 |
Set up, operate and maintain basic static machines |
|
MSFGG2009 |
Fabricate and assemble frames |
|
MSFGG2010 |
Fabricate and install insect and security screens |
|
MSFSS2001 |
Rectify faults in product |
|
MSFSS2003 |
Undertake surface preparation |
Picture framing
|
Unit code |
Unit title |
|
MSFPF2001 |
Use picture framing sector hand and power tools |
|
MSFPF2002 |
Cut mouldings to length |
|
MSFPF2003 |
Join mouldings |
|
MSFPF2004 |
Mount artwork |
|
MSFPF2005 |
Cut mat boards |
|
MSFPF2006 |
Cut and handle glazing materials for framing |
|
MSFPF2007 |
Assemble basic artwork package |
Soft furnishings production
|
Unit code |
Unit title |
|
MSFSF2001 |
Cut single layer fabrics |
|
MSFSF2002 |
Machine sew materials |
|
MSFSF2003 |
Machine sew specialised sewn products |
|
MSFSF2004 |
Hand sew soft furnishings |
|
MSFSF2005 |
Operate a steam press |
|
MSFSF2006 |
Calculate fabric quantities for window coverings |
|
MSFSF2007 |
Construct unlined curtains and drapes |
|
MSFSF2008 |
Construct lined curtains and drapes |
|
MSFSF2009 |
Construct padded pelmets |
|
MSFSF2014 |
Use soft furnishing sector hand and power tools |
Blinds, awnings and shade sail - production
|
Unit code |
Unit title |
|
LMTTF2009A |
Identify and select canvas and sail materials |
|
LMTTF2014A |
Weld plastic materials |
|
MSFBA2001 |
Use blinds, awnings, security screens and grilles hand and power tools |
|
MSFBA2002 |
Set up, operate and maintain blinds and awnings sector static machines |
|
MSFBA2004 |
Construct roll-up and pull-down style blinds and awnings |
|
MSFBA2005 |
Construct vertical-style blinds |
|
MSFBA2006 |
Construct textiles for canopy-style awnings |
|
MSFBA2007 |
Construct plastic and timber Venetian-style blinds |
|
MSFBA2008 |
Construct aluminium Venetian-style blinds |
|
MSFBA2009 |
Construct metal louvre and canopy-hooded style awnings |
|
MSFBA2010 |
Construct aluminium roll-up style awnings |
Blinds, awnings and shade sail - installation
|
Unit code |
Unit title |
Prerequisites |
|
AHCLSC308A |
Install metal structures and features |
|
|
CPCCCM2002A |
Carry out excavation |
* |
|
CPCCCO2013A |
Carry out concreting to simple forms |
* |
|
CPCCOHS2001A |
Apply OHS requirements, policies and procedures in the construction industry |
|
|
LMTGN2005B |
Perform minor maintenance |
|
|
LMTTF2016A |
Install products on and off-site |
|
|
MSFBA3002 |
Install exterior blinds and awnings |
Window coverings installation
|
Unit code |
Unit title |
|
MSFBA2003 |
Select and apply blinds and awnings sector hardware and fixings |
|
MSFSF2010 |
Make up tracks for window coverings |
|
MSFSF2011 |
Fit and adjust curtain hardware |
|
MSFSF2012 |
Fit and adjust interior blinds |
|
MSFSF2013 |
Dress windows |
|
MSFSF2014 |
Use soft furnishing hand and power tools |
Upholstery
|
Unit code |
Unit title |
|
MSFUP2001 |
Use upholstery sector hand and power tools |
|
MSFUP2002 |
Fit upholstery components |
|
MSFUP2003 |
Apply contemporary foundations to upholstered furniture |
|
MSFUP2004 |
Machine sew basic upholstery final cover materials |
|
MSFUP2005 |
Develop cutting plan and cut single layer upholstery fabric |
|
MSFUP2006 |
Dismantle and re-assemble furniture for upholstering |
Flooring technology
|
Unit code |
Unit title |
|
MSFFL2001 |
Use flooring technology sector hand and power tools |
|
MSFFL2002 |
Receive and prepare floor covering materials for installation |
|
MSFFL2003 |
Select, operate and maintain floor covering cutting machine |
|
MSFFL2004 |
Moisture test timber and concrete floors |
|
MSFFL2005 |
Remove existing floor coverings |
|
MSFFL2006 |
Prepare, select and apply smoothing and patching compounds |
|
MSFFL2007 |
Select and apply appropriate compounds and additives |
|
MSFFL2008 |
Prepare concrete sub-floors using wet cleaning methods |
|
MSFFL2009 |
Select, prepare and apply moisture barriers and damp proof membranes to concrete sub-floors |
|
MSFFL2010 |
Prepare walls for covering |
|
MSFFL2011 |
Select, operate and maintain grinding equipment |
|
MSFFL2012 |
Select, operate and maintain shot blasting equipment |
|
MSFFL2013 |
Select, operate and maintain demolition equipment |
|
MSFFL2014 |
Select, operate and maintain scarifying equipment |
|
MSFFL2015 |
Coarse sand timber flooring |
|
MSFFL2016 |
Install hard underlays |
|
MSFFL2017 |
Install carpet cushion underlays and gripper accessories |
|
MSFFL2018 |
Install unpatterned tufted and bonded carpet floor coverings |
|
MSFFL2019 |
Install carpet tiles using standard installation procedures |
|
MSFFL2020 |
Install unpatterned tufted and bonded carpet floor coverings to stairs |
|
MSFFL2021 |
Install lay flat vinyl floor coverings |
|
MSFFL2022 |
Install resilient tiles using standard installation procedures |
|
MSFFL2023 |
Install laminate timber and bamboo flooring |
|
MSFFL2025 |
Install impact and sound absorption underlay |
|
MSFFL2026 |
Nail strip timber flooring |
|
MSFFL2027 |
Install expansion joints |
|
MSFFL2028 |
Install mouldings and edge trims to timber flooring |
Mattress and base making
|
Unit code |
Unit title |
|
MSFMB2001 |
Prepare and assemble base unit |
|
MSFMB2002 |
Assemble mattress components |
|
MSFMB2003 |
Cut mattress and base fabrics |
|
MSFMB2004 |
Assemble springs for mattresses |
|
MSFMB2005 |
Make springs for mattresses and bases |
|
MSFMB2006 |
Set up, operate and maintain a tape edging machine |
|
MSFMB2007 |
Set up, operate and maintain a quilting machine |
|
MSFSF2014 |
Use soft furnishing hand and power tools |
Coopering
|
Unit code |
Unit title |
|
MSFCP2001 |
Use coopering sector hand and power tools |
|
MSFCP2002 |
Produce barrels using non-fired processes |
|
MSFCP2003 |
Produce barrels using fired processes |
|
MSFCP2004 |
Maintain and repair barrels |
|
MSFFM2006 |
Hand make timber joints |
|
MSFFM2012 |
Set up, operate and maintain pressure and clamping machines |
|
MEM05007C |
Perform manual heating and thermal cutting |
|
MEM05012C |
Perform routine manual metal arc welding |
Group B
A maximum of three (3) relevant units may be selected from:
- units not previously selected from Group A
- units from Group B, below
- relevant units from this Training Package, other endorsed Training Packages and accredited courses, where those units are available at Certificate II or Certificate III level.
Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.
|
Unit code |
Unit title |
|
BSBCUS201B |
Deliver a service to customers |
|
BSBINN201A |
Contribute to workplace innovation |
|
BSBITU101A |
Operate a personal computer |
|
BSBITU306A |
Design and produce business documents |
|
HLTAID003 |
Apply first aid |
|
MSFGN2002 |
Move and store materials and products |
|
MSS402001A |
Apply competitive systems and practices |
|
MSS402002A |
Sustain process improvements |
|
MSS402010A |
Manage the impact of change on own work |
|
MSS402020A |
Apply quick changeover procedures |
|
MSS402021A |
Apply Just in Time procedures |
|
MSS402030A |
Apply cost factors to work practices |
|
MSS402040A |
Apply 5S procedures |
|
MSS402050A |
Monitor process capability |
|
MSS402051A |
Apply quality standards |
|
TLIA2011A |
Package goods |
|
TLIA2013A |
Receive goods |
|
TLID2003A |
Handle dangerous goods/hazardous substances |
Qualification Mapping Information
No equivalent qualification
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73
